ZJXKWIN B0GF24PFKJ

Download PDF
Contents

ZJXKWIN Gaming Chair (Model B0GF24PFKJ) Instruction Manual

Your guide to assembly, operation, and care.

Introduction

Thank you for choosing the ZJXKWIN Gaming Chair. This manual provides essential information for the safe and efficient use of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

ZJXKWIN Gaming Chair in a room setting

Image: The ZJXKWIN Gaming Chair (Model B0GF24PFKJ) in a typical home office or gaming setup.

Safety Information

Warning: This product requires assembly. Always follow the instructions carefully to avoid injury. Ensure all screws and bolts are tightened securely before use. Do not stand on the chair. Do not use the chair if any parts are damaged or missing. Keep small parts away from children.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

  • Backrest
  • Seat Cushion with Footrest
  • Armrests (Left and Right)
  • Star Base
  • Casters (5 pieces)
  • Gas Lift Cylinder
  • Gas Lift Cover
  • Mechanism Plate
  • Lumbar Pillow
  • Headrest Pillow
  • Hardware Pack (screws, washers, Allen wrench)

Assembly Instructions

Follow these steps for proper assembly. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

  1. Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the star base until they click into place.
  2. Install Gas Lift: Place the gas lift cylinder into the center hole of the star base. Cover it with the gas lift cover.
  3. Attach Mechanism Plate: Secure the mechanism plate to the underside of the seat cushion using the provided M6*20mm screws. Ensure the front of the mechanism faces the front of the seat.
  4. Secure Armrests: Attach the armrests to the sides of the seat cushion using the appropriate bolts. Ensure they are firmly tightened.
  5. Connect Backrest to Seat: Align the backrest with the seat cushion and secure it using the remaining bolts.
  6. Assemble Chair onto Base: Carefully place the assembled seat and backrest onto the gas lift cylinder. Apply downward pressure to ensure it is seated properly.
  7. Attach Pillows: Secure the lumbar pillow and headrest pillow to the chair using their integrated straps.
Exploded view of ZJXKWIN Gaming Chair components

Image: Exploded view of the ZJXKWIN Gaming Chair components for assembly reference.

Video: An official ZJXKWIN video demonstrating the assembly process for the gaming chair.

Operating Instructions

Your ZJXKWIN Gaming Chair offers several adjustable features for personalized comfort.

Height Adjustment

To adjust the chair height, pull the lever located under the seat upwards while seated to lower the chair, or stand up and pull the lever to raise it. Release the lever at your desired height.

Recline Function

The chair features a 90° to 135° adjustable recline. Pull the recline lever on the side of the chair upwards, lean back to your desired angle, and release the lever to lock it in place. To return to an upright position, pull the lever and lean forward.

Diagram showing 90 to 135 degree recline positions of the ZJXKWIN Gaming Chair

Image: Visual guide illustrating the 90-degree (working), 110-degree (gaming), and 135-degree (rest) recline positions.

Retractable Footrest

To use the footrest, pull it out from under the seat. Extend it to your preferred length. To retract, push it back under the seat until it is fully stored.

360° Swivel and Casters

The chair seat can swivel 360 degrees for full-range movement. The silent rolling casters allow for quiet mobility on various floor types.

Close-up of the 360-degree smooth wheel casters on the ZJXKWIN Gaming Chair

Image: Detail of the 360-degree smooth-rolling casters designed for quiet movement.

Ergonomic Support

The chair is designed with ergonomic contouring, including linkage armrests that sync with the backrest, and removable lumbar and headrest pillows to provide stable support for your neck, spine, and arms.

Diagram showing ergonomic linkage armrests adjusting with chair recline

Image: Illustration of the ergonomic linkage armrests, which adjust with the chair's recline to maintain arm support.

Maintenance

Regular maintenance will prolong the life and appearance of your gaming chair.

  • Cleaning: For the PU leather surface, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. For stubborn stains, use a mild leather cleaner.
  • Inspection: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary.
  • Casters: Keep casters free of hair and debris to ensure smooth movement.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the leather to fade or crack.
Close-up of breathable and soft PU leather material

Image: Detail of the breathable and soft PU leather, highlighting its easy-care properties.

Troubleshooting

If you encounter issues with your chair, refer to the following common problems and solutions.

ProblemPossible CauseSolution
Chair does not adjust heightGas lift not engaged or faultyEnsure the lever is fully pulled. If issue persists, contact support for gas lift replacement.
Chair wobblesLoose screws or uneven floorCheck and tighten all assembly screws. Ensure the chair is on a flat surface.
Casters not rolling smoothlyDebris in castersRemove any hair or debris from the caster wheels.
Recline mechanism not lockingMechanism obstruction or damageEnsure no obstructions. If damaged, contact customer support.

Product Specifications

  • Brand: ZJXKWIN
  • Model: B0GF24PFKJ
  • Color: Blue
  • Material: Leather (Upholstery), Foam (Fill), Metal (Frame)
  • Product Dimensions (D x W x H): 21.5" x 20" x 48.8" (approximate overall height 48.8" from feature bullets, 20"H from specifications is likely seat height)
  • Item Weight: 32 pounds
  • Maximum Weight Recommendation: 300 lbs (136 kg)
  • Reclining Position Count: 3 (90°-135°)
  • Gas Lift: Class 3
  • Swivel: 360°
  • UPC: 780745285008
Diagram showing dimensions of the ZJXKWIN Gaming Chair

Image: Detailed dimensions of the ZJXKWIN Gaming Chair, including height, width, and depth measurements.

Image illustrating the 300 lbs weight capacity of the ZJXKWIN Gaming Chair

Image: Visual representation of the chair's robust construction supporting up to 300 lbs.

Warranty Information

ZJXKWIN products are manufactured to high-quality standards. For specific warranty details regarding your gaming chair, please refer to the warranty card included in your package or contact ZJXKWIN customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact ZJXKWIN customer support. Refer to the contact information provided in your product packaging or visit the official ZJXKWIN website for support options.

© 2026 ZJXKWIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.