jojofuny Automatic Pet Feeder and Waterer (Model 20VQ181Q11936MV) - Instruction Manual

1. Introduction

Thank you for choosing the jojofuny Automatic Pet Feeder and Waterer. This multi-functional feeding station is designed to provide a convenient and hygienic solution for feeding and watering your pets, including cats, dogs, and rabbits. It features a dual-use design with stainless steel bowls for food and an automatic water dispenser, ensuring your pet has access to fresh food and water throughout the day. The detachable components make it easy to clean and maintain.

Image: The jojofuny Automatic Pet Feeder and Waterer, shown fully assembled with food in the stainless steel bowls and water in the dispenser, ready for use.

2. Important Safety Instructions

• Read all instructions carefully before using the product.
• This product is intended for pet use only. Do not use for any other purpose.
• Keep out of reach of children.
• Ensure the feeder is placed on a stable, level surface to prevent tipping.
• Regularly inspect the product for any damage. Discontinue use if damaged.
• Clean all components regularly to maintain hygiene and prevent bacterial growth.
• Use only clean, fresh water in the water dispenser.

3. Package Contents

Please check the package to ensure all components are present:

• 1 x Feeder Base (Green)
• 2 x Stainless Steel Bowls
• 1 x Water Bottle (approx. 500ml capacity)
• 1 x Water Dispenser Connector

Image: The base of the jojofuny Automatic Pet Feeder and Waterer, showing the three compartments before the bowls and water bottle are inserted.

4. Setup Instructions

1. Unpack Components: Carefully remove all parts from the packaging.
2. Clean Components: Wash the stainless steel bowls, water bottle, and feeder base with mild soap and warm water. Rinse thoroughly and dry completely before assembly.
3. Insert Stainless Steel Bowls: Place the two stainless steel bowls into the designated circular openings on the feeder base. Ensure they are seated securely.
4. Fill Water Bottle: Fill the water bottle with clean, fresh water.
5. Attach Water Bottle: Invert the filled water bottle and insert its nozzle into the water dispenser connector located in the center of the feeder base. The water will automatically dispense into the small water reservoir until it reaches a certain level, then stop.
6. Position Feeder: Place the assembled feeder on a stable, level surface in an area accessible to your pet.

Image: A visual representation highlighting the convenient and detachable design of the feeder, illustrating how components can be separated for easy cleaning and refilling.

5. Operating Instructions

1. Food Dispensing: Pour your pet's dry food into one or both of the stainless steel bowls. The bowls are designed to hold a sufficient amount for multiple servings.
2. Water Dispensing: The automatic water dispenser will continuously refill the water reservoir as your pet drinks, ensuring a constant supply of fresh water. The design prevents water from overflowing and wetting your pet's fur.
3. Monitoring: Regularly check the food levels in the bowls and the water level in the bottle. Refill as needed.

Image: An overhead view of the jojofuny Automatic Pet Feeder and Waterer, showing both stainless steel bowls filled with pet food and the water bottle dispensing water into its reservoir.

6. Cleaning and Maintenance

Regular cleaning is essential for your pet's health and the longevity of the feeder.

• Daily: Refill food and water. Wipe down any spills.
• Weekly:
  1. Remove the stainless steel bowls and water bottle.
  2. Empty any remaining food or water.
  3. Wash the bowls, water bottle, and feeder base with warm, soapy water. Use a brush for hard-to-reach areas if necessary.
  4. Rinse all components thoroughly to remove soap residue.
  5. Allow all parts to air dry completely or dry with a clean cloth before reassembling.
• Deep Cleaning: Periodically, you may use a pet-safe disinfectant after washing to ensure thorough sanitization. Always rinse extensively after using disinfectants.

Image: The jojofuny Automatic Pet Feeder and Waterer, demonstrating its accessible design for easy cleaning and maintenance of the food bowls and water dispenser.

7. Troubleshooting

8. Product Specifications

Image: A diagram illustrating the key dimensions of the jojofuny Automatic Pet Feeder and Waterer, including length, width, and height.

9. Customer Support

For any questions, concerns, or assistance with your jojofuny Automatic Pet Feeder and Waterer, please contact your retailer or visit the official jojofuny store on Amazon:

Visit the jojofuny Store on Amazon

Please have your model number (20VQ181Q11936MV) ready when contacting support.