DEWALT 6 Gallon STEALTHSONIC Shop Vacuum Wet and Dry DXV06PL-QT Instruction Manual

1. Introduction

The DEWALT 6 Gallon STEALTHSONIC Shop Vacuum Wet and Dry DXV06PL-QT is a versatile and powerful cleaning tool designed for both wet and dry applications in jobsite, workshop, and household environments. Featuring STEALTHSONIC technology, this vacuum operates at a quiet 65 dB, making it 50% quieter than traditional models while delivering a robust 4 Peak HP motor and 85 CFM airflow. Its lightweight design, durable casters, and 17 ft cleaning reach ensure efficient and thorough cleaning with ease.

Image: The DEWALT 6 Gallon STEALTHSONIC Shop Vacuum, showcasing its compact and robust design.

2. Safety Information

Always read and understand all instructions before using this vacuum cleaner. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Do not leave the appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not use without filters in place.
• Turn off all controls before unplugging.

3. Package Contents

Your DEWALT DXV06PL-QT Shop Vacuum package includes the following items:

• DEWALT Poly Shop Vacuum Wet/Dry (1 unit)
• Disposable Filter Bag (1 unit)
• 1-7/8" Hose (1 unit)
• Extension Wand (2 units)
• Tool Adaptor (1 unit)
• Floor Brush (1 unit)
• Crevice Nozzle (1 unit)
• Utility Nozzle (1 unit)
• Cartridge Filter (1 unit)
• Foam Filter (1 unit)
• Accessory Bag (1 unit)
• Instruction Manual (1 unit)

Image: All accessories included with the DEWALT DXV06PL-QT Shop Vacuum, neatly arranged.

4. Setup

Follow these steps to assemble your DEWALT Shop Vacuum:

1. Unboxing: Carefully remove all components from the packaging. Ensure all listed accessories are present.
2. Attaching Casters: Turn the tank upside down. Insert the caster feet into the slots on the bottom of the tank. Secure them with the provided screws.
3. Filter Installation:
   • For Dry Vacuuming: Ensure the cartridge filter is securely installed over the filter cage.
   • For Wet Vacuuming: Remove the cartridge filter and disposable filter bag. Install the foam filter over the filter cage.
4. Connecting the Hose: Insert the large end of the hose into the vacuum port on the front of the tank until it clicks securely into place.
5. Attaching Accessories: Connect the desired extension wands and cleaning nozzles (floor brush, utility nozzle, crevice nozzle) to the free end of the hose.

Video: A demonstration of the DEWALT DXV06PL-QT Shop Vac setup and initial use, highlighting its quiet operation.

5. Operating Instructions

5.1 Dry Vacuuming

1. Ensure the cartridge filter is correctly installed for dry pickup.
2. Attach the appropriate dry cleaning accessory (e.g., floor brush for large areas, crevice nozzle for tight spaces).
3. Plug the power cord into a suitable electrical outlet.
4. Press the ON/OFF switch to the 'ON' position to start the vacuum.
5. Guide the nozzle over the area to be cleaned.
6. After use, press the ON/OFF switch to the 'OFF' position and unplug the vacuum.

5.2 Wet Vacuuming

1. Remove the cartridge filter and any disposable filter bags.
2. Install the foam filter over the filter cage for wet pickup.
3. Attach the appropriate wet cleaning accessory (e.g., utility nozzle for liquid spills).
4. Plug the power cord into a suitable electrical outlet.
5. Press the ON/OFF switch to the 'ON' position to start the vacuum.
6. Vacuum liquids. The vacuum will automatically shut off when the tank is full.
7. After use, press the ON/OFF switch to the 'OFF' position and unplug the vacuum. Empty the liquid from the tank.

Video: A detailed look at the DXV06PL-QT Dewalt Shop Vac, including its wet vacuuming capabilities.

5.3 Blowing Function

1. Locate the blowing port on the vacuum.
2. Insert the hose into the blowing port until it is secure.
3. Turn on the vacuum. The air will now exit through the hose, allowing you to blow away debris.

Image: A person demonstrating the effective use of the DEWALT Shop Vacuum for cleaning various surfaces.

6. Maintenance

6.1 Filter Maintenance

• Cartridge Filter (Dry Use): Regularly check the cartridge filter for dirt and debris. Clean by gently tapping it against a hard surface or using a soft brush. Replace the filter when it becomes heavily soiled or damaged to maintain optimal suction.
• Foam Filter (Wet Use): After wet vacuuming, remove the foam filter and rinse it thoroughly with water. Allow it to air dry completely before reinstallation or storage. Ensure it is dry before switching back to dry vacuuming.

6.2 Tank Cleaning

• Empty the tank after each use, especially after wet vacuuming.
• Wipe the interior of the tank with a damp cloth to remove any residue.
• Ensure the tank is completely dry before storing or switching between wet and dry applications.

6.3 Hose and Accessory Care

• Inspect the hose and accessories for any blockages before and after each use. Clear any obstructions to maintain airflow.
• Store the hose and accessories neatly using the integrated hose strap and accessory bag to prevent damage and keep them organized.

7. Troubleshooting

If you encounter issues with your DEWALT Shop Vacuum, refer to the following common troubleshooting steps:

• Loss of Suction: Check if the tank is full, the filter is clogged, or there are blockages in the hose or accessories. Ensure all connections are secure.
• Unusual Noise: Turn off and unplug the vacuum. Inspect the hose, tank, and motor area for any foreign objects. If the noise persists, contact customer support.
• Vacuum Not Starting: Verify that the power cord is securely plugged into a working electrical outlet and that the ON/OFF switch is in the 'ON' position. Check for tripped circuit breakers.

8. Specifications

Image: Key specifications of the DEWALT Shop Vacuum, including capacity, horsepower, and quiet operation.

9. Warranty and Support

This DEWALT Shop Vacuum comes with 3 Years of Limited Coverage. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in the original product packaging or visit the official DEWALT website.