Introduction
Thank you for choosing the BEWISHOME Vanity Table with LED Mirror. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Information:
- Follow detailed assembly instructions to prevent injuries during installation.
- Exercise caution when using the integrated power outlets and USB ports to avoid damaging electrical components.
- The vanity table will be shipped in two separate packages. Please ensure you have received both packages before starting assembly.
Setup and Assembly
This vanity table requires assembly. Detailed assembly instructions are provided with the product. Please ensure all components are present and undamaged before beginning. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
Package Contents
The BEWISHOME Vanity Table is delivered in two separate packages. Do not begin assembly until both packages have arrived.

Image: The product is delivered in two separate packages. Ensure both are received before assembly.
Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging. Verify against the parts list in the included assembly guide.
- Identify Hardware: Separate and identify all screws, dowels, and other hardware.
- Follow Detailed Instructions: Refer to the step-by-step assembly instructions provided in the product box. Each part is typically numbered for easy identification.
- Secure Connections: Ensure all screws and fasteners are tightened securely, but do not overtighten to avoid damaging the engineered wood.
- Install Mirror and Lighting: Attach the LED mirror unit according to the instructions, ensuring all electrical connections are made correctly.
- Position Drawers and Shelves: Insert the 11 drawers into their respective slides and place items on the 6 open shelves as desired.

Image: Detailed dimensions of the vanity table, including drawer and shelf sizes.
Operating Instructions
LED Mirror Lighting
The integrated LED mirror features adjustable brightness and three lighting modes to suit your needs.
- Power On/Off: Locate the touch sensor on the mirror surface to turn the lights on or off.
- Change Lighting Mode: Tap the touch sensor to cycle through the three available light modes: Cold White, Warm White, and Warm Yellow.
- Adjust Brightness: Press and hold the touch sensor to adjust the brightness level within the selected mode. Release when the desired brightness is achieved.

Image: The LED mirror offers three lighting modes (Cold White, Warm White, Warm Yellow) and adjustable brightness.
Integrated Power Outlet and USB Ports
The vanity table includes a built-in power station with two AC outlets and two USB ports for convenient charging of electronic devices and powering styling tools.
- AC Outlets: Plug in hair dryers, curling irons, or other small appliances. Ensure the total wattage does not exceed the specified limit (refer to specifications).
- USB Ports: Connect USB cables to charge smartphones, tablets, or other compatible devices.
- Safety Precaution: Always ensure devices are properly connected and avoid overloading the outlets. Disconnect devices when not in use.

Image: The vanity table features a built-in power outlet with 2 AC outlets and 2 USB ports.
Maintenance and Care
Proper care will ensure the longevity and appearance of your BEWISHOME Vanity Table.
- Cleaning: Wipe the surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
- Dusting: Regularly dust the surfaces with a soft, dry cloth.
- Mirror Care: Use a glass cleaner specifically designed for mirrors to clean the LED mirror. Do not spray cleaner directly onto the mirror; apply it to a cloth first.
- Drawer Slides: Periodically check the smooth slide rails for any debris and clean as needed to maintain smooth operation.

Image: Features like open shelving, 11 drawers, a hair dryer holder, and smooth slide rails for organization.
Troubleshooting
If you encounter issues with your vanity table, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| LED mirror lights do not turn on. | Power cable not connected; loose connection; faulty power source. | Ensure the power cable is securely plugged into a working wall outlet. Check all internal connections. Test the outlet with another device. |
| Lights are dim or flickering. | Brightness setting is low; power fluctuation. | Press and hold the touch sensor to increase brightness. Ensure a stable power supply. |
| Power outlets/USB ports not working. | Power cable not connected; internal wiring issue; overloaded circuit. | Verify the main power cable is connected. Avoid plugging in high-wattage devices simultaneously. If the issue persists, contact customer support. |
| Drawers are stiff or do not slide smoothly. | Debris in slide rails; incorrect assembly; overtightened screws. | Clean the drawer slide rails. Recheck assembly instructions for correct drawer installation. Loosen any overtightened screws slightly. |
If you experience any issues not listed here or if the suggested solutions do not resolve the problem, please contact BEWISHOME customer support for assistance.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | EFST50W |
| Color | White |
| Material | Engineered Wood |
| Overall Dimensions (L x W x H) | 110 cm x 40 cm x 140 cm (43.3 x 15.7 x 55.1 inches) |
| Weight | 46 Kilograms (approx. 101.4 lbs) |
| Number of Drawers | 11 |
| Open Shelves | 6 |
| Mirror Type | LED with adjustable brightness and 3 lighting modes (Cold White, Warm White, Warm Yellow) |
| Power Outlets | 2 AC Outlets |
| USB Ports | 2 USB Ports |
| Assembly Required | Yes, detailed instructions included. |
| Care Instructions | Wipe with a damp cloth. |
Warranty Information
BEWISHOME products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty covering defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
The warranty does not cover:
- Damage caused by improper assembly or installation.
- Damage resulting from misuse, abuse, neglect, or accidents.
- Normal wear and tear.
- Unauthorized repairs or modifications.
For detailed warranty information, please refer to the documentation included with your purchase or contact BEWISHOME customer support.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please do not hesitate to contact BEWISHOME customer support.
Contact Information:
- Website: Visit the official BEWISHOME website for support resources and contact forms.
- Email: Refer to your product packaging or the BEWISHOME website for the customer service email address.
- Phone: Check the BEWISHOME website for regional customer service phone numbers.
When contacting support, please have your product model number (EFST50W) and proof of purchase readily available to expedite assistance.
