oneisall EaseClean CB01 Automatic Cat Litter Box

1. Introduction

Thank you for choosing the oneisall EaseClean CB01 Automatic Cat Litter Box. This device is designed to simplify litter box maintenance and enhance the living experience for both you and your feline companion. The CB01 model features the EaseClean Pro cleaning system, emphasizing modular disassembly for thorough cleaning, an open design, and multiple safety sensors to ensure your cat's comfort and safety.

2. Important Safety Instructions

• The oneisall CB01 self-cleaning cat litter box is equipped with radar, infrared, weight sensors, and motor protection for maximum safety.
• If a cat approaches during a cleaning cycle, the cleaning process will automatically stop and resume only after the cat has left the area.
• Warning: Suitable for cats over 6 months old and weighing more than 1.2 kg (2.6 lbs). The safety sensor activates only when a cat weighs more than 350 g (0.77 lbs). Keep small animals away from the device.
• Do not immerse the main unit in water. Clean with a damp cloth.
• Ensure the device is placed on a stable, level surface.
• Keep out of reach of children.

3. Package Contents

The Ease S1 set includes:

• 1 x Main Litter Box Unit
• 1 x Silicone Mat (leak-proof pad)
• 40 x Self-cleaning Litter Bags
• 1 x Power Adapter
• 1 x User Manual

Image 3.1: Main oneisall EaseClean CB01 Automatic Cat Litter Box unit.

Image 3.2: Included silicone mat (leak-proof pad).

Image 3.3: Included self-cleaning litter bags.

4. Product Overview

The oneisall EaseClean CB01 features an open-top design for easy access and a spacious interior, suitable for large cats up to 13 kg (28.6 lbs). Key components include:

• Main Unit: Houses the motor, sensors, and control panel.
• Litter Bed: The area where cat litter is placed, featuring a stainless steel filter grate.
• Waste Drawer: An 11-liter capacity drawer located at the side for collecting clumped waste.
• Silicone Mat: A soft, leak-proof mat that protects the base and reduces litter adhesion.
• Control Panel: Buttons for mode selection and manual operation.

5. Setup

1. Unpack: Carefully remove all components from the packaging.
2. Placement: Place the main unit on a firm, level surface in a suitable location, away from direct sunlight or heat sources. Ensure there is enough space around the unit for the waste drawer to be pulled out.
3. Install Silicone Mat: Place the soft silicone mat inside the litter bed, ensuring it covers the base completely to prevent leaks and reduce litter adhesion.
4. Add Litter: Fill the litter bed with clumping cat litter. The stainless steel grate is compatible with clay and mineral-based clumping litters. For plant-based or mixed litters, an optional 12mm plate (ASIN: B0GD6QXYYN, sold separately) is required. Do not overfill; refer to the fill line inside the unit.
5. Insert Waste Bag: Line the 11-liter waste drawer with one of the provided self-cleaning litter bags. Slide the drawer securely into its designated slot on the side of the unit.
6. Connect Power: Plug the power adapter into the unit and then into a wall outlet. The unit will perform an initial calibration cycle.

6. Operating Instructions

The oneisall EaseClean CB01 offers both automatic and manual operation modes.

6.1 Automatic Mode

After initial setup and power-on, the unit defaults to automatic mode. In this mode:

• The unit uses weight and infrared sensors to detect when your cat has used the litter box and left.
• After a preset delay (typically a few minutes to allow clumps to form), the cleaning cycle will automatically begin.
• The internal mechanism will sift the litter, separating solid waste and clumps, and depositing them into the waste drawer.
• The cycle will pause immediately if a cat approaches or enters the litter box during operation, resuming only after the cat has moved away.

6.2 Manual Mode

To initiate a cleaning cycle manually or to override the automatic settings:

• Locate the control panel on the unit.
• Press the designated manual clean button (refer to the specific button layout on your unit for exact labeling).
• The unit will perform a cleaning cycle. Ensure no cats are near the litter box when initiating a manual cycle.

7. Maintenance and Cleaning

Regular maintenance ensures optimal performance and hygiene.

7.1 Waste Drawer Emptying

• The 11-liter waste drawer can hold clumps for approximately 14-20 days for a single cat.
• When the drawer is full, carefully pull it out from the side of the unit.
• Lift the tied litter bag, seal it, and dispose of it.
• Insert a new self-cleaning litter bag and slide the drawer back into place.

7.2 Deep Cleaning (EaseClean System)

The EaseClean system allows for easy and thorough cleaning:

• All modules, including the stainless steel filter grate and the soft silicone mat, are fully detachable.
• Disassembly: The unit can be quickly disassembled in approximately 10 seconds. Refer to the diagrams in the quick start guide for specific steps on detaching modules.
• Cleaning: Wash the detachable components with mild soap and water. The soft silicone mat protects the base, prevents leaks, and reduces adhesion, making it easy to clean.
• Reassembly: Reassemble the components once they are completely dry. Deep cleaning can be completed in approximately 20 seconds after washing.

8. Troubleshooting

9. Specifications

10. Warranty and Support

The oneisall EaseClean CB01 Automatic Cat Litter Box comes with a 2-year warranty. For any questions, technical assistance, or warranty claims, please contact oneisall customer service. Our customer support team is available for 24-hour service to assist you.

Please retain your proof of purchase for warranty purposes.