PUPKIDS T223
Contents
PUPKIDS Dog Training Collar T223 User Manual
Model: T223
1. Introduction
Thank you for choosing the PUPKIDS Dog Training Collar T223. This device is designed to assist in effective and humane dog training, offering four versatile modes and a long-range remote control. It is suitable for medium to large dogs weighing between 20-140 lbs. Please read this manual thoroughly before use to ensure proper operation and safety for your pet.
2. Important Safety Information
- Not for Small Dogs: This collar is designed for dogs weighing 20-140 lbs. Do not use on dogs under 20 lbs.
- Collar Fit: Ensure the collar fits snugly but not too tightly. It should be possible to fit two fingers comfortably under the collar.
- Wear Duration: Do not leave the collar on your dog for more than 12 hours per day to prevent skin irritation.
- Skin Monitoring: Regularly check your dog's neck for any signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
- Supervision: Always supervise your dog when the training collar is in use.
- Remote Control: The remote control is not waterproof. Keep it away from water.
- Static Mode: Use static stimulation responsibly and only after your dog understands tone and vibration commands. Start with the lowest level and increase gradually if necessary.
3. Package Contents
- PUPKIDS Dog Training Remote Control
- PUPKIDS Dog Training Collar Receiver
- Adjustable Nylon Collar Strap
- Dual Charging Cable
- Test Light Tool
- User Manual
4. Product Overview
The PUPKIDS Dog Training Collar T223 features an intuitive remote and a durable, waterproof receiver collar. Key components include:
4.1 Remote Control
- LCD Display: Shows battery level, selected dog, mode, and intensity levels.
- Static Button: Activates static stimulation.
- Vibration Button: Activates vibration.
- Tone Button: Activates audible tone.
- Intensity Dial: Adjusts levels for Static, Vibration, and Tone modes.
- Channel Switch (1/2 button): Selects between Dog 1 and Dog 2, or locks/unlocks channels.
- Magnetic Dot: Used for turning the receiver on/off and pairing.

Image: The remote control and collar, highlighting the four training modes: Night-Light, Static, Vibra, and Tone, along with their adjustable levels.
4.2 Receiver Collar
- Contact Points: Deliver static stimulation.
- Night-Lights: Seven-color breathing lights, colorful streamer lights, and high-brightness LEDs for visibility.
- Charging Port: USB-C port for recharging.
- Magnetic Dot: Used for turning the receiver on/off and pairing.
- IPX7 Waterproof: The receiver is fully waterproof, suitable for swimming and rainy conditions.

Image: The remote control and receiver collar, illustrating the innovative magnetic switch for powering the collar on and off.
5. Setup
5.1 Charging the Devices
Before first use, fully charge both the remote control and the receiver collar. Use the provided dual charging cable to charge both units simultaneously. A red light indicates charging, and a green light indicates a full charge.
Video: Demonstrates the charging process for both the remote control and the receiver collar using the dual charging cable.

Image: The remote and collar connected to the dual charging cable, illustrating the quick charging capability and extended battery life.
5.2 Turning On/Off the Receiver
To turn the receiver collar on or off, first ensure the remote is powered on. Then, touch the magnetic red dot on the remote to the magnetic red dot on the receiver for 5 seconds. The receiver will indicate power status with a light.
Video: Shows how to use the innovative magnetic switch on the remote to turn the receiver collar on and off.
5.3 Pairing the Collar (If not pre-paired)
If you are using a single collar, it is typically pre-paired from the factory. If you need to pair a new collar or re-pair an existing one:
- Select the desired dog channel (Dog 1 or Dog 2) on the remote and ensure the corresponding collar is off.
- Touch the magnetic red dot of the remote to the magnetic red dot of the receiver for 5 seconds. The receiver's red and green lights will flash, indicating pairing status.
- While the lights are flashing, press both the "Tone" button and the "Vibra" button on the remote simultaneously to complete pairing.
Video: A step-by-step guide on how to pair the PUPKIDS training collar with the remote control.
5.4 Fitting the Collar
Proper fit is crucial for the collar's effectiveness and your dog's comfort. The collar should sit high on your dog's neck, directly behind the ears. Ensure the contact points touch the skin. You should be able to fit two fingers snugly between the collar and your dog's neck. The strap is adjustable and can be trimmed if too long.

Image: Demonstrates the correct fit of the adjustable PUPKIDS training collar on a dog, suitable for breeds weighing 20-140 lbs.
5.5 Testing the Static Function
Before placing the collar on your dog, test the static function using the provided test light tool. Place the test light over the contact points on the receiver. Select the static mode on the remote and press the static button. The test light should illuminate, indicating the static function is working.
Video: Instructions on how to test the static function of the PUPKIDS training collar using the included test light tool.
6. Operating Instructions
6.1 Selecting Dog Channels
The remote supports training for up to two dogs. Press the 1/2 button to switch between Dog 1 and Dog 2. You can also select both channels to control two dogs simultaneously.
6.2 Locking/Unlocking Channels
To prevent accidental activation, you can lock the selected dog channel. Long-press the 1/2 button for 5 seconds to lock the channel. Repeat the action to unlock it.
6.3 Adjusting Training Levels
The remote offers adjustable intensity levels for Static (0-100 HI), Vibration (1-8), and Tone (1-8). Press the intensity dial down to cycle through Static, Vibra, and Tone modes. Turn the dial left to decrease the level and right to increase it.

Image: The remote control illustrating how to use the intensity dial to adjust the levels for static, vibration, and tone modes.
6.4 Using Training Modes
The PUPKIDS T223 offers four training modes:
- Tone Mode: Delivers an audible beep. Use for initial commands or positive reinforcement.
- Vibration Mode: Provides a gentle vibration. Useful for getting your dog's attention or as a mild correction.
- Static Mode: Delivers a safe, low-frequency pulse. Use for behavior correction when other modes are ineffective. Start at the lowest effective level.
- Night-Light Modes: Enhance visibility in low-light conditions.

Image: The remote control and collar, showing the display for selecting and adjusting the four training modes.
6.5 Night-Light Operation
The receiver collar features three night-light modes for enhanced visibility:
- Seven-color Breathing Lights: Cycles through various colors.
- Colorful Streamer Lights: Dynamic color display.
- High-brightness LEDs: Provides strong white light.
To activate or change night-light modes, long-press the light button on the remote to turn the light on/off. Short-press the light button to switch between the different light modes.
Video: Demonstrates the three anti-lost night-light modes of the PUPKIDS T223 training collar, enhancing visibility in the dark.

Image: Dogs wearing PUPKIDS collars, showcasing the three colorful and safe night-light modes for quick pet location in low-light environments.
7. Maintenance
- Cleaning: Regularly clean the collar and contact points with a damp cloth. Ensure the collar is dry before recharging.
- Battery Care: Charge the devices fully before long periods of inactivity. Store in a cool, dry place.
- Waterproof Receiver: The receiver is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, the remote is not waterproof.

Image: A golden retriever playing in water, demonstrating the IPX7 waterproof capability of the PUPKIDS dog collar receiver.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not responding to remote. | Low battery on either device, devices not paired, or out of range. | Charge both devices. Re-pair the collar and remote. Ensure devices are within 4200ft range. |
| Static stimulation not working. | Contact points not touching skin, static level too low, or test light not used correctly. | Adjust collar fit. Increase static level gradually. Use the test light tool to verify function. |
| Dog shows signs of irritation. | Collar worn too long, too tight, or improper contact. | Remove collar immediately. Check for sores. Ensure proper fit and wear duration (max 12 hours). Consult a vet if needed. |
| Remote screen is blank. | Low battery or screen timeout. | Charge the remote. Press any button to wake the screen. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | PUPKIDS |
| Model Name | T223 |
| Training Modes | Tone (1-8 levels), Vibration (1-8 levels), Static (0-100 HI levels), 3 Night-Light modes |
| Range | Up to 4200 feet (1400 yards) in open spaces |
| Waterproof Rating | Receiver: IPX7 (Waterproof); Remote: Not waterproof |
| Dog Size Suitability | 20-140 lbs (Adjustable neck size 12-25 inches) |
| Battery Type | Rechargeable Nonstandard Battery (included) |
| Charging Time | Approx. 2 hours for full charge |
| Battery Life | Receiver: Up to 15 days (Work Time), 200 days (Standby Time); Remote: Up to 30 days (Work Time), 200 days (Standby Time) |
| Material | Nylon (Collar Strap) |
| Item Weight | 13.7 ounces |
10. Warranty and Support
The PUPKIDS Dog Training Collar T223 comes with a 12-month warranty. For any product issues, questions, or support, please contact PUPKIDS customer service.
Customer Support: support@pupkids.net (Available 24 hours/7 days)
PUPKIDS is committed to providing a good purchasing and usage experience. Our team has excellent design and R&D capabilities, ensuring product quality and user satisfaction.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.