JAMFLY L-Shaped Sectional Sleeper Sofa Bed with Storage

Introduction

Thank you for choosing the JAMFLY L-Shaped Sectional Sleeper Sofa Bed with Storage. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assembly requires two people for safety and ease.
• Keep children and pets away from the assembly area. Small parts can be a choking hazard.
• Place the sofa on a level, stable surface.
• Do not exceed the maximum weight capacity of 600 pounds.
• Avoid standing or jumping on the sofa or bed.
• Keep away from direct sunlight and heat sources to prevent material degradation.

Package Contents

Your JAMFLY L-Shaped Sectional Sleeper Sofa Bed is shipped in two packages. Please verify that all components listed below are present before proceeding with assembly.

Image: This diagram illustrates the dimensions of the sofa in both its L-shaped configuration and as a sleeper bed. It also indicates that the product is shipped in two separate packages, labeled 'Box 1' and 'Box 2', which may arrive at different times.

Included Components:

• Sofa Base Sections (Main sofa, Chaise)
• Backrests and Cushions
• Armrests
• Legs (Metal and Plastic)
• Hardware Pack (Bolts, Washers, Allen Key, Hex Key, Screwdriver)
• Throw Pillows (3 included)
• Assembly Instructions Guide

Note: While some tools are included, additional tools like a screwdriver may be helpful for assembly.

Assembly Instructions

Follow these step-by-step instructions for assembling your JAMFLY sectional sofa. It is recommended that two people perform the assembly.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Attach Legs: Securely attach the furniture legs to the designated points on the bottom of the sofa base sections. Ensure they are tightened firmly.
3. Connect Sofa Sections: Join the main sofa section and the chaise section using the provided connectors. Ensure the sections are aligned properly before securing.
4. Install Armrests: Attach the armrests to the sides of the sofa sections. Use the provided bolts and tools to fasten them securely.
5. Place Backrests and Cushions: Position the backrests and seat cushions onto the sofa. The back cushions are attached, while seat cushions are removable.
6. Final Check: Verify that all connections are tight and the sofa is stable before use.

For detailed visual guidance, refer to the step-by-step assembly guide included in your package.

Operating Instructions

Converting from Sofa to Sleeper Bed

The JAMFLY sectional features a convenient pull-out mechanism to transform it into a comfortable bed.

1. Clear Area: Ensure there is sufficient space in front of the sofa for the bed extension.
2. Pull Out Bed: Locate the handle or strap beneath the front edge of the main sofa section. Gently pull it outwards and upwards to extend the sleeper bed mechanism.
3. Secure Position: Once fully extended, ensure the bed mechanism is locked into place for stability.

To convert back to a sofa, reverse the steps, pushing the bed mechanism back into the sofa until it is fully retracted.

Image: This image demonstrates the versatility of the sectional. It shows the sofa configured with a left chaise, then with a right chaise, and finally fully extended as a sleeper bed, highlighting its multi-functional design.

Reversing the Chaise Configuration

The chaise lounge can be positioned on either the left or right side to suit your room layout.

1. Separate Sections: Disconnect the chaise section from the main sofa section.
2. Reposition Chaise: Move the chaise to the desired side (left or right).
3. Reconnect: Realign and reconnect the chaise section to the main sofa section using the provided connectors.

Utilizing the Storage Compartment

The chaise section includes a hidden storage compartment for your convenience.

1. Lift Chaise Seat: Gently lift the seat cushion of the chaise section. It is designed to hinge upwards.
2. Access Storage: Place or retrieve items such as blankets, pillows, or books from the compartment.
3. Close Compartment: Carefully lower the chaise seat until it is fully closed and secure.

Image: This close-up view shows the hidden storage compartment located beneath the chaise seat. It is depicted open, revealing space for storing items like blankets, pillows, and other household essentials.

Maintenance and Care

Proper care will extend the life and appearance of your JAMFLY sectional sofa.

• Regular Cleaning: Vacuum regularly using a soft brush attachment to remove dust and debris.
• Spot Cleaning: For spills, spot clean immediately with a clean, damp cloth and a mild upholstery cleaner. Blot, do not rub.
• Professional Cleaning: Professional cleaning is recommended periodically for thorough maintenance.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
• Heat Sources: Keep the sofa away from direct heat sources like radiators or fireplaces.
• Cushion Care: Rotate and fluff removable cushions regularly to maintain their shape and even wear. The seat cushion covers are removable for cleaning.

Troubleshooting

If you encounter issues not listed here or require further assistance, please contact customer support.

Specifications

Image: This image details key features of the sofa, including sturdy armrests, a soft backrest, strong feet for stability, and the use of high-density sponge for comfort and durability.

Warranty and Support

This JAMFLY product is covered by a Limited Manufacturer Warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration.

For technical support, missing parts, or warranty claims, please contact JAMFLY customer service through the retailer where the product was purchased or visit the official JAMFLY website.

When contacting support, please have your model number (US93) and proof of purchase readily available.