Important Safety Information
- This transfer pump should not be used for pumping water or high-flammability fuels such as gasoline, liquefied petroleum gas, or alcohol.
- After pumping, please turn off the pump power before closing the fuel nozzle.
- Single use duration should not exceed 30 minutes to prevent overheating.
- Ensure all connections are tight to prevent leaks and maintain pressure.
- Always connect the pump directly to a 12V vehicle battery, ensuring correct polarity (positive to positive, negative to negative).
What's in the Box
- 1 x Diesel Transfer Pump
- 1 x Fuel Nozzle
- 1 x 4 FT Inlet Hose
- 1 x 6.6 FT Outlet Hose
- 1 x 9.8 FT Battery Clip
- 1 x User Manual
- 1 x Filter
- 4 x Metal Hose Clamps
- 3 x Metal Connectors
Image: All components included in the TaskStar TP13UP Diesel Transfer Pump Kit.
Product Overview
The TaskStar TP13UP Electric Diesel Transfer Pump Kit is designed for efficient and safe transfer of diesel, kerosene, machine oil, and transformer oil. Its robust 12V motor ensures consistent performance across various temperatures.
Image: Demonstrates the pump's fast transfer rate, capable of emptying a 55-gallon drum in under 7 minutes.
With a flow rate of up to 13 gallons per minute (GPM), this pump significantly improves work efficiency. It can draw fuel from up to 9.8 feet away and pump it to a height of 26.2 feet, making it suitable for remote or high-position fueling tasks.
Image: Illustrates the pump's powerful suction and lift capabilities for various fueling scenarios.
The pump is portable and space-saving, featuring an easy-to-install base with pre-drilled holes for secure mounting. It includes an adjustable fuel nozzle for controlled flow and a mesh filter to prevent large particles from entering the pump, ensuring clean fuel flow.
Image: Shows compatibility with diesel, kerosene, machine oil, and transformer oil, while explicitly stating it is not for gasoline or water.
Assembly and Setup
- Connect Hoses: Attach the inlet (4 FT) and outlet (6.6 FT) hoses to the pump's designated 'IN' and 'OUT' ports using the provided metal hose clamps. Ensure clamps are tightened securely to prevent leaks.
- Install Filter: Connect the mesh filter to the end of the inlet hose. Secure it with a metal hose clamp.
- Attach Fuel Nozzle: Connect the adjustable fuel nozzle to the end of the outlet hose. Secure it with a metal hose clamp.
- Mount Pump (Optional): Use the pre-drilled holes on the pump's base to securely mount it if desired.
- Connect Power: Attach the 9.8 FT battery clips to a 12V vehicle battery, ensuring correct polarity (red clip to positive terminal, black clip to negative terminal).
Image: Visual guide showing the three main steps for connecting the hoses, filter, nozzle, and power supply to the pump.
Video: A detailed guide on how to install the fuel transfer pump, demonstrating each connection step.
Operating Instructions
- Position Hoses: Place the inlet hose with the filter into the fuel source (e.g., diesel drum). Insert the fuel nozzle into the receiving tank (e.g., tractor fuel tank).
- Initiate Pumping: Ensure all connections are secure. Flip the power switch on the pump to the 'ON' position.
- Control Flow: Use the adjustable fuel nozzle to control the flow rate. The nozzle can be locked for continuous pumping.
- Monitor Transfer: Observe the fuel transfer. The transparent hoses allow for visual confirmation of fuel flow.
- Stop Pumping: Once the desired amount of fuel is transferred or the receiving tank is full, turn off the pump's power switch before removing the fuel nozzle.
Image: The pump being used to refuel agricultural equipment from a diesel drum.
Video: Demonstrates the ease and speed of pumping fuel into a tractor using the TaskStar pump.
Image: The pump in action, refueling a truck from a portable fuel container.
Video: Highlights the versatility of the TaskStar pump for tractors, trucks, and boats.
Maintenance
- Filter Cleaning: Regularly inspect and clean the mesh filter to ensure optimal fuel flow and prevent pump damage.
- Hose Inspection: Check hoses for any signs of wear, cracks, or damage before each use. Replace damaged hoses immediately.
- Proper Storage: After use, disconnect the pump and hoses. Drain any remaining fuel. Store the pump in a dry, clean place away from direct sunlight and extreme temperatures.
Troubleshooting
- Pump Not Starting: Check battery connections for secure contact and correct polarity. Ensure the battery has sufficient charge.
- Slow or No Flow: Inspect the mesh filter for clogs and clean if necessary. Check hoses for kinks or blockages. Ensure the inlet hose is fully submerged in the fuel source.
- Leaks: Verify all hose clamps are tightened securely. Inspect hoses and connections for any damage.
- Overheating: If the pump feels excessively hot, turn it off immediately and allow it to cool. Ensure continuous operation does not exceed 30 minutes.
Product Specifications
| Specification | Value |
|---|---|
| Brand | TaskStar |
| Model | TP13UP |
| Flow Rate | 13 GPM (Gallons Per Minute) |
| Power Source | 12V DC Vehicle Battery |
| Max Suction Length | 9.8 FT |
| Max Lift Height | 26.2 FT |
| Compatible Fluids | Diesel, Kerosene, Machine Oil, Transformer Oil |
| Inlet Connection Size | 1 Inch |
| Outlet Connection Size | 0.9 Inches |
| Duty Cycle | 30 minutes (max single use) |
| Item Weight | 4 Pounds |
| Material | Aluminum, Copper, Metal, Plastic |
Warranty and Customer Support
For any questions, concerns, or warranty inquiries regarding your TaskStar TP13UP Diesel Transfer Pump Kit, please refer to the contact information provided in your product packaging or visit the official TaskStar website for customer support.