JOYING JY-ST900N12

JOYING 12.3" QLED Android 13 Car Stereo (JY-ST900N12) Instruction Manual

Model: JY-ST900N12 | Brand: JOYING

1. Introduction and Overview

This manual provides detailed instructions for the installation, setup, and operation of your JOYING 12.3" QLED Android 13 Car Stereo, model JY-ST900N12. This unit is specifically designed for Subaru Forester models from 2009-2013 and Impreza WRX models from 2008-2012, offering a seamless plug-and-play experience.

Key features include a powerful Qualcomm QCM6490 8-Core processor, 12GB RAM, 256GB storage, 5G WiFi, 4G module, AM/FM radio, and precise GPS navigation. It supports both wired and wireless CarPlay and Android Auto for enhanced smartphone integration.

JOYING 12.3 inch QLED Android 13 Car Stereo installed in a Subaru dashboard

Image: JOYING 12.3" QLED Android 13 Car Stereo installed in a Subaru dashboard, showcasing its large display and integration.

2. What's in the Box

Please ensure all components are present before beginning installation:

  • 12.3" Radio Unit (x1)
  • Frame Kit (x1)
  • Single Din Cage (x1)
  • Power Cable (x1)
  • Bluetooth Antenna (x1)
  • WiFi Antenna (x2)
  • 4G Antenna (x2)
  • USB Cable (x2)
  • User Manual (x1)
  • GPS Antenna (x1)
  • External Microphone (x1)
  • AR Cable (x1)
  • Screen Ribbon Cable (x1)
All components included in the JOYING car stereo package, laid out on a white surface.

Image: All components included in the JOYING car stereo package, laid out on a white surface, including the main unit, wiring harnesses, antennas, and tools.

3. Installation Guide

This section outlines the general steps for installing the JOYING car stereo. Professional installation is recommended if you are unfamiliar with car audio systems.

3.1. Preparation

  • Ensure the vehicle's ignition is off and disconnect the negative terminal of the car battery to prevent electrical shorts.
  • Gather necessary tools: plastic trim removal tool, screwdriver set.

3.2. Removing the Factory Radio

  1. Using a plastic trim removal tool, carefully pry off the decorative panel surrounding the factory radio. Start from the edges and work your way around.
  2. Once the decorative panel is loose, remove any fixing screws holding the factory radio in place.
  3. Gently pull out the factory radio from the dashboard.
  4. Disconnect all wiring harnesses and antenna cables from the back of the factory radio.
Dashboard of a Subaru Forester/Impreza showing the factory radio and the surrounding trim panel.

Image: Dashboard of a Subaru Forester/Impreza showing the factory radio and the surrounding trim panel, indicating the area for removal.

3.3. Preparing the New Head Unit

  1. If your new head unit requires the original air vents, carefully remove them from the factory decorative panel and install them into the new frame kit.
  2. Connect the provided power cable harness to the corresponding socket on the back of the JOYING head unit.
  3. Connect the GPS antenna, WiFi antennas, 4G antennas, and USB cables to their respective ports on the head unit.
  4. If installing a reverse camera, connect the reversing image video cable and the reversing image detection line.

3.4. Wiring and Connection

  1. Connect the main power harness from the JOYING unit to the vehicle's factory wiring harness. Ensure all connections are secure.
  2. Connect the ground wire of the power harness to a suitable grounding point on the vehicle's body iron frame.
  3. Organize all cables neatly to prevent interference or damage during reassembly.

3.5. Installing the New Head Unit

  1. Carefully slide the JOYING head unit into the dashboard opening.
  2. Secure the head unit with the appropriate screws.
  3. Reattach the decorative panel, ensuring all clips snap into place.

Video: Detailed installation guide for the car stereo, demonstrating removal of the old unit and connection of new wiring.

4. Setup and Initial Configuration

4.1. Power On and Initial Boot

Reconnect the negative terminal of the car battery. Turn on the vehicle's ignition. The head unit should power on and display the Android operating system.

4.2. Network Connectivity (5G WiFi & 4G Module)

  • WiFi: Navigate to Settings > Network & Internet > Wi-Fi. Select your desired WiFi network and enter the password to connect. The unit supports dual WiFi bands (2.4 & 5G & 6 GHz).
  • 4G Module: Insert a compatible SIM card into the designated slot for mobile internet access. Note that the unit does not support making phone calls or sending SMS via the SIM card.

4.3. Bluetooth Pairing

To pair your smartphone via Bluetooth:

  1. On the head unit, go to the Bluetooth application.
  2. On your smartphone, enable Bluetooth and search for available devices.
  3. Select