Marsail MSUBF09DG-F-US
Contents
Marsail Full Size Upholstered Bed Frame with Adjustable Headboard Instruction Manual
Model: MSUBF09DG-F-US | Brand: Marsail
1. Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 1300 lbs. Exceeding this limit may result in structural failure and injury.
- Sharp Edges: Exercise caution around the bed frame during assembly and use to avoid injuries from potential sharp edges.
- Assembly: Ensure all components are securely fastened before use. Do not fully tighten screws until instructed, to allow for proper alignment.
- Children: Keep children away from the assembly area. Small parts can be a choking hazard.
- Maintenance: Regularly check all connections to ensure they remain tight.
2. Package Contents
Verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.

Figure 2.1: All components and hardware included in the package. Please check against the parts list in your physical manual.
The package typically includes:
- Upholstered Headboard
- Side Rails (Left and Right)
- Footboard
- Center Support Beam
- Wooden Slats with Velcro
- Support Legs (12 total)
- Hardware Pack (Screws, Washers, Allen Wrench)
- Installation Manual (this document)
3. Setup and Assembly
Assembly is designed to be straightforward. It is recommended to assemble the bed frame with two people. Ensure you have enough space and all parts are laid out before starting.
3.1 Assembly Video Guide
Video 3.1: Official Marsail Bed Frame Installation Video. This video demonstrates the step-by-step assembly process for the upholstered bed frame.
3.2 Step-by-Step Assembly Instructions
- Attach Headboard Legs: Secure the headboard legs to the upholstered headboard using the provided M8x28mm screws and washers. Do not fully tighten at this stage; leave a small gap for later adjustments.

Figure 3.1: Attaching the headboard legs. Ensure screws are not fully tightened yet.
- Assemble Side Rails: Connect the two sections of each side rail using the provided M8x40mm screws and washers. Ensure the left and right side rails are correctly identified.

Figure 3.2: Connecting the side rail segments. Note the orientation for left and right sides.
- Attach Side Rails to Headboard: Hook the assembled side rails into the brackets on the headboard legs.

Figure 3.3: Hooking the side rails into the headboard. Ensure a secure connection.
- Install Center Support Beam: Place the center support beam between the side rails.
- Position Wooden Slats: Unroll the wooden slats and lay them across the side rails. The slats are typically connected by Velcro for easy alignment. Ensure the pre-drilled holes on the slats align with the corresponding holes on the side rails.
- Secure Slats: Fasten the wooden slats to the side rails using the provided self-tapping screws. Fully tighten all screws for stability.
- Final Tightening: Once all components are in place and aligned, fully tighten all screws on the headboard legs and side rails.

Figure 3.4: The Marsail Full Size Upholstered Bed Frame after complete assembly.
4. Operating Instructions
4.1 Adjustable Headboard
The upholstered headboard features a 3-level adjustable height mechanism to accommodate mattresses ranging from 6 to 12 inches thick. To adjust the headboard height:
- Remove the mattress from the bed frame.
- Loosen the screws connecting the headboard to the headboard legs (refer to assembly step 1).
- Carefully slide the headboard up or down to the desired height.
- Retighten all screws securely to lock the headboard in place.

Figure 4.1: The headboard can be adjusted to three different height levels to suit various mattress thicknesses.
4.2 Mattress Placement
Place your full-size mattress directly onto the wooden slats. A box spring is not required for this bed frame due to its sturdy slat support system.

Figure 4.2: The bed frame is designed for stable support, eliminating the need for a box spring.
5. Maintenance
- Cleaning: For the upholstered parts, gently spot clean with a damp cloth and mild detergent. Avoid harsh chemicals that may damage the fabric. For wooden or metal parts, wipe with a dry or slightly damp cloth.
- Regular Checks: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
- Movement: When moving the bed frame, lift it rather than dragging it to prevent damage to the legs and frame structure.
- Under-bed Cleaning: The 6.5-inch leg clearance allows for easy cleaning underneath the bed, including access for robotic vacuums.

Figure 5.1: The bed frame's height provides ample space for robotic vacuum cleaners.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Screws are not fully tightened. | Ensure all screws, especially those connecting the side rails to the headboard and footboard, are fully tightened. |
| Squeaking noises from the bed frame. | Loose connections or friction between parts. | Retighten all assembly screws. Ensure slats are properly seated and secured. The all-wood structure is designed to minimize noise. |
| Mattress does not fit properly. | Incorrect bed frame size or headboard height. | Verify you have the correct full-size mattress for a full-size frame. Adjust the headboard height if your mattress is between 6-12 inches thick. |
| Missing parts or damaged components. | Manufacturing defect or shipping damage. | Do not proceed with assembly. Contact Marsail customer support immediately for replacement parts. |

Figure 6.1: The Marsail bed frame features a wooden structure designed for silent operation, unlike typical noisy metal frames.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | MSUBF09DG-F-US |
| Brand | Marsail |
| Size | Full |
| Product Dimensions (L x W x H) | 76"L x 54"W x 43.3"H (Adjustable Headboard) |
| Weight Capacity | 1300 lbs |
| Compatible Mattress Thickness | 6" - 12" |
| Material | Wood with Upholstery |
| Color | Dark Gray |
| Assembly Required | Yes |
| Special Features | Adjustable Headboard, Noise Reduction, Robot Vacuum Clearance |

Figure 7.1: Detailed product dimensions and key features.
8. Warranty Information
Marsail products are manufactured with quality and durability in mind. For specific warranty details regarding your bed frame, please refer to the warranty card included in your package or visit the official Marsail website. Keep your purchase receipt as proof of purchase for any warranty claims.
9. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Marsail customer support:
- Online Support: Visit the Marsail Store on Amazon for FAQs and contact options.
- Email: Refer to your product packaging or included documentation for direct email support.
Please have your model number (MSUBF09DG-F-US) and purchase date ready when contacting support.
10. Product Overview
This video provides a general overview of the Marsail Upholstered Bed Frame, highlighting its features and design.
Video 10.1: Marsail Bed Frame Show Video. This video showcases the aesthetic and functional aspects of the bed frame.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.