Introduction
This manual provides detailed instructions for the safe and effective use of your Godox V1Mid-C Camera Flash. The V1Mid-C is a high-performance TTL speedlite designed for Canon cameras, featuring a round flash head, 2.4G wireless system, high-speed sync (HSS), and an intuitive touchscreen interface. Please read this manual thoroughly before operation to ensure optimal performance and to prevent damage to the unit.
What's in the Box
Upon unpacking, please verify that all the following items are included:
- Flash Body x1
- Storage Bag x1
- Lithium Battery x1
- Adapter x1
- Mini Stand x1
- USB-C Charging Cable x1
Setup
1. Battery Installation and Charging
The Godox V1Mid-C uses a high-performance lithium battery. Ensure the battery is fully charged before first use.
- Open the battery compartment cover located on the side of the flash body.
- Insert the lithium battery, ensuring the contacts align correctly. Close the cover securely.
- To charge, connect the provided USB-C cable to the flash's USB-C port and to the adapter. Plug the adapter into a power outlet. The charging indicator will show the charging status.
2. Mounting the Flash to Your Camera
The V1Mid-C is designed to mount securely onto your camera's hot shoe.
- Slide the flash's mounting foot into your camera's hot shoe.
- Rotate the locking ring on the flash base clockwise until it is firmly secured. Do not overtighten.
Operating Instructions
1. Power On/Off
Press and hold the power button to turn the flash on or off. The touchscreen will illuminate upon power-on.
2. Navigating the Touchscreen Interface
The V1Mid-C features an intuitive touchscreen for quick adjustments.
- Tap icons to select flash modes, wireless settings, and other functions.
- Swipe or use the dial to adjust power levels, zoom, and other parameters.
- The clear UI provides real-time feedback on your settings.
3. Flash Modes and Synchronization
The V1Mid-C supports various flash modes to suit different shooting scenarios:
- TTL (Through-The-Lens) Mode: Automatic flash exposure based on camera metering.
- Manual Mode: Allows you to set flash power output manually from 1/1 to 1/256.
- Multi Mode: Fires a series of rapid flashes for creative effects.
- High-Speed Sync (HSS): Enables flash synchronization at shutter speeds faster than the camera's native sync speed (up to 1/8000s).
- First-Curtain Sync / Rear-Curtain Sync: Controls when the flash fires relative to the shutter curtains.
4. Godox Optical System and Light Shaping
The V1Mid-C utilizes the Godox Optical System for even and natural light distribution. The round flash head and optimized optical lens group ensure smooth transitions and consistent illumination.
5. Wireless Operation
The integrated 2.4G wireless system allows for off-camera flash control. Refer to your camera's manual or a compatible Godox wireless trigger manual for detailed setup instructions.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the flash body. For the flash tube and optical lens, use a lens cleaning cloth and solution. Avoid harsh chemicals.
- Storage: Store the flash in a cool, dry place away from direct sunlight and moisture. Remove the battery if storing for extended periods.
- Battery Care: Recharge the lithium battery regularly, even if not in use, to maintain its lifespan. Avoid fully discharging the battery.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. | Low battery; Incorrect mode; Flash not securely mounted; Camera settings. | Charge battery; Check flash mode (TTL/Manual); Re-mount flash; Verify camera flash settings. |
| Flash output is too weak/strong. | Incorrect power setting (Manual mode); Exposure compensation; Distance to subject. | Adjust manual power; Check camera/flash exposure compensation; Adjust distance. |
| Flash recycle time is slow. | Low battery; High power output. | Recharge battery; Use lower power settings if possible. |
| Wireless trigger not working. | Incorrect channel/group; Distance; Interference. | Ensure flash and trigger are on same channel/group; Reduce distance; Check for obstructions. |
Specifications
| Feature | Detail |
|---|---|
| Brand | GODOX |
| Model Name | V1Mid |
| Model Number | V1 Mid-C |
| Compatible Mountings | Canon |
| Camera Flash Type | Hotshoe |
| Flash Sync Speed | 1/250s (Normal), up to 1/8000s (HSS) |
| Recycle Time | 1.7s |
| Full-Power Flashes | Up to 650 |
| Connectivity Technology | Wired, RF (2.4G Wireless) |
| Power Source | Lithium Battery (1x 9V required) |
| Item Dimensions (D x W x H) | 2.83"D x 2.83"W x 6.61"H |
| Exposure Control Type | Automatic, Manual |
| Viewfinder Type | LCD screen (Touchscreen) |
| Light Sensitivity | 1/600s - 1/20000s |
| Maximum Shutter Speed | 1/8000 seconds |
| Shooting Modes | Auto, On, Off, Rear Curtain Sync, Slow Sync |
Warranty Information
The Godox V1Mid-C Camera Flash comes with a 1-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty card included with your product or contact Godox customer service.
Support
For further assistance, technical support, or service inquiries regarding your Godox V1Mid-C Camera Flash, please visit the official Godox website or contact their customer support department. You can often find FAQs, firmware updates, and additional resources online.
Official Brand Store: GODOX Store on Amazon
