1. Introduction
The ECOVACS ULTRAMARINE P1 is an advanced robotic pool cleaner designed to provide efficient and thorough cleaning for your swimming pool. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. The ULTRAMARINE P1 features a powerful 4,800 GPH UltraPure suction system, dual-layer filtration, SmartNavi intelligent navigation, and convenient app control.
Image: The ECOVACS ULTRAMARINE P1 robotic pool cleaner positioned beside a swimming pool.
2. Important Safety Instructions
Please read and understand all safety instructions before using the ULTRAMARINE P1. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the robot is disconnected from the charger before placing it in or removing it from the pool.
- Do not operate the robot if the charging cable or plug is damaged.
- Keep the robot and its accessories out of reach of children and pets.
- Use only the original charging adapter provided with the device.
- Do not use the robot in pools with water temperatures outside the recommended range (typically 10°C to 35°C).
- Never attempt to disassemble or repair the robot yourself. Contact authorized service personnel.
3. Package Contents
Verify that all items are present in the package:
- ECOVACS ULTRAMARINE P1 Robotic Pool Cleaner
- Charging Adapter and Cable
- Dual-Layer Filter Basket (pre-installed)
- Recovery Hook
- User Manual
4. Initial Setup
4.1 Charging the Robot
Before first use, fully charge the ULTRAMARINE P1. Connect the charging adapter to the robot's charging port and then to a power outlet. The charging indicator will illuminate to show the charging status. A full charge typically takes approximately 3-4 hours.
Image: The ECOVACS ULTRAMARINE P1 with its charging port visible.
4.2 App Connection
Download the ECOVACS app from your smartphone's app store (available for iOS and Android). Follow the in-app instructions to connect your ULTRAMARINE P1 via Bluetooth. This enables smart control, cleaning mode selection, and scheduling.
Image: The ECOVACS app interface on a smartphone, demonstrating control options for the ULTRAMARINE P1.
5. Operation
5.1 Placing the Robot in the Pool
Gently lower the ULTRAMARINE P1 into the pool. Ensure it is fully submerged and air bubbles have escaped before starting a cleaning cycle. The robot will sink to the bottom.
5.2 Cleaning Modes and Settings
The ULTRAMARINE P1 offers versatile cleaning options controllable via the ECOVACS app:
- Floor Cleaning: Focuses solely on cleaning the pool floor.
- Wall Cleaning: Cleans pool walls and the waterline.
- Full Pool Cleaning: Provides comprehensive cleaning of both the pool floor and walls.
You can also adjust the suction power (Eco, Standard, Max) through the app to match the debris level and desired cleaning intensity. The robot provides up to 180 minutes of continuous operation in Eco mode, covering up to 180 m² on a single charge.
Image: The ULTRAMARINE P1 operating in a pool, highlighting its extended battery life and coverage area.
5.3 SmartNavi Intelligent Navigation
The integrated SmartNavi system utilizes an advanced IMU sensor to monitor the robot's position and movement. This allows it to map the most effective cleaning paths, reducing redundant passes and ensuring up to 99% coverage of the pool floor.
Image: A visual representation of the SmartNavi system guiding the ULTRAMARINE P1 along an optimized cleaning path.
5.4 Obstacle Surmounting
The ULTRAMARINE P1 is designed with robust wheels that enable it to easily overcome obstacles up to 5.5 cm (2.1 inches) high, such as pool drains, lights, and other minor irregularities on the pool floor, ensuring uninterrupted cleaning.
Image: The ULTRAMARINE P1 demonstrating its ability to navigate over a 5.5 cm obstacle.
5.5 Retrieving the Robot
After a cleaning cycle, use the provided recovery hook to safely lift the robot from the pool. Avoid pulling the robot out by its handle or brushes.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ULTRAMARINE P1.
6.1 Cleaning the Dual-Layer Filter
The ULTRAMARINE P1 features an innovative dual-layer filtration system. Regularly clean both the 180 µm outer mesh and the 3 µm inner filter to maintain optimal suction performance and water clarity.
- Open the robot's cover and remove the filter basket.
- Separate the outer mesh from the inner fine filter.
- Rinse both filter components thoroughly with clean water to remove all trapped debris.
- Ensure filters are completely dry before reassembling and placing them back into the robot.
Image: Detailed view of the ULTRAMARINE P1's dual-layer filter system and cleaning process.
6.2 Brush and Roller Inspection
Periodically inspect the four independently driven roller brushes for wear, damage, or debris entanglement. Clean any entangled hair or debris. If brushes are significantly worn, replace them with genuine ECOVACS replacement parts to ensure consistent traction and effective cleaning.
Image: The ULTRAMARINE P1 underwater, showcasing its four roller brushes for stable movement and thorough cleaning.
6.3 Storage
When not in use for extended periods, clean the robot thoroughly, ensure it is dry, and store it in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to partially charge the battery (around 50%) for long-term storage to preserve battery health.
7. Troubleshooting
If you encounter issues with your ULTRAMARINE P1, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot not moving or stuck | Low battery; debris obstructing brushes/wheels; excessively slippery pool surface. | Charge the robot fully. Check and clear any debris from brushes and wheels. Ensure the pool surface is suitable for robotic cleaning. |
| Poor cleaning performance | Clogged filter; low suction power setting; blocked suction channel. | Clean the dual-layer filter thoroughly. Increase suction power in the app. Check for and clear any blockages in the robot's suction path. |
| App connection issues | Bluetooth off; robot out of range; app glitch. | Ensure Bluetooth is enabled on your smartphone and the robot is nearby. Restart the app and the robot. Try re-pairing the device in the app settings. |
| Robot not climbing walls | Low battery; dirty brushes; algae on pool walls. | Ensure the robot is fully charged. Clean the roller brushes. Address any algae growth on pool walls. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ECOVACS |
| Model Name | ULTRAMARINE P1 |
| Color | White and blue |
| Product Dimensions (LxWxH) | 46.6L x 39.4W x 24H cm |
| Power Source | Battery powered |
| Special Features | APP Remote Control |
| Control Method | App |
| Battery Energy | 5200 mAh |
| Battery Type | Lithium Ion |
| Number of Batteries | 1 (AAA, included) |
| Battery Weight | 1325 Grams |
| Assembly Required | No |
| Installation Type | Robotic |
| Model Year | 2026 |
| Manufacturer | ECOVACS |
| Country of Origin | China |
9. Warranty and Support
The ECOVACS ULTRAMARINE P1 comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official ECOVACS website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ECOVACS customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
Online Support: Visit the official ECOVACS website for FAQs, user manuals, and contact information.
Customer Service: Refer to your product packaging or the ECOVACS website for regional customer service contact details.
