Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Assembly Required: This chair requires assembly. Follow the provided instructions carefully to ensure safe and proper assembly.
- Weight Capacity: Do not exceed the maximum weight capacity of 265 lbs (120 kg) to maintain stability and prevent damage.
- Stability: Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners to ensure continued stability.
- Placement: Use the chair on a flat, stable surface. Avoid placing it on uneven ground.
- Children: Keep small parts and packaging materials away from children during assembly.
Package Contents
Verify that all components are present before beginning assembly.

Image: Components as received in packaging.
- Padded Cushion (1)
- Metal Frame for Cushion (1)
- Wooden Side Frames (2)
- Wooden Crossbars (2)
- Assembly Hardware (Screws, Dowels)
Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Step 1: Attach Cushion Frame Sections
Connect the two sections of the metal cushion frame using the provided screws. Ensure the 'Front' label on the fabric aligns correctly.

Image: Connecting the two metal frame sections for the cushion.
Step 2: Prepare Wooden Frame
Insert the wooden dowels into the designated holes on the wooden side frames and crossbars. Connect the crossbars to one of the side frames, securing them with screws. Tighten screws approximately 70% at this stage.

Image: Assembling the wooden frame, showing dowel and screw placement.
Step 3: Complete Wooden Frame Assembly
Attach the second wooden side frame to the assembled crossbars. Fully tighten all screws on the wooden frame once all connections are made.
Step 4: Attach Padded Cushion to Frame
Carefully place the padded cushion onto the assembled wooden frame. Align the pre-drilled holes on the cushion's metal frame with the holes on the wooden frame. Secure the cushion to the wooden frame using the remaining screws.

Image: Securing the padded cushion to the wooden frame.
Assembly Video Guide
For a visual guide, please refer to the assembly video below. This video demonstrates the step-by-step process of putting together your accent chair.
Video: Step-by-step assembly guide for the HOMCOM Accent Chair.
Operating Instructions
The HOMCOM Modern Accent Chair is designed for comfortable relaxation and reading.
- Seating: Sit comfortably in the chair, allowing the high backrest and thick foam seat to provide support.
- Footrest: The integrated footrest extends naturally to support your legs, allowing you to stretch out and unwind.
- Reclining Positions: This chair offers 5 reclining positions. Adjust the backrest to your desired angle for optimal comfort.

Image: Demonstrating comfortable use of the chair with its footrest.
Maintenance
Proper care will extend the life and appearance of your accent chair.
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the velvet upholstery or wood finish.
- Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the upholstery.
- Inspection: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as necessary.

Image: Close-up view of the chair's skin-friendly velvet-feel fabric.
Troubleshooting
If you encounter any issues with your chair, refer to the following common solutions.
- Chair feels unstable or wobbly:
- Ensure all assembly screws are fully tightened.
- Verify that the chair is placed on a flat, even surface.
- Check if any wooden dowels were missed during assembly.
- Back cushion slides down or chair tilts forward:
- Ensure the cushion is correctly seated and secured to the frame as per assembly instructions.
- Verify that the reclining mechanism is properly engaged in your desired position.
- Confirm that the maximum weight capacity of 265 lbs (120 kg) is not exceeded.
- Difficulty adjusting reclining positions:
- Ensure no obstructions are preventing the mechanism from moving freely.
- Apply gentle, even pressure when adjusting.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Number | 83B-278V00CG |
| Overall Dimensions (W x D x H) | 26.4" W x 44.9" D x 41.3" H (67 x 114 x 105 cm) |
| Weight Capacity | 265 lbs (120 kg) |
| Material | Velvet (Upholstery), Birch Wood (Frame), Foam (Fill) |
| Color | Dark Grey |
| Back Style | Solid Back |
| Special Features | Foot Rest, High Back, Upholstered, 5 Reclining Positions |
| Assembly Required | Yes |
| Product Care | Wipe Clean |

Image: Detailed product dimensions.
Warranty Information
This HOMCOM Accent Chair comes with a 90 Day Warranty Against Manufacturer Defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or assistance with your HOMCOM Accent Chair, please contact our customer support team:
- Manufacturer: Aosom Canada
- Phone: 1-416-792-6088
- Location: Markham, Ontario, CA
Please have your model number (83B-278V00CG) and proof of purchase ready when contacting support.