Introduction
This manual provides detailed instructions for the SODANY Projection Alarm Clock, Model TS1466/1467. This battery-operated digital alarm clock features a large LCD display, touch/vibration activated backlight and projection, temperature display, date, and a snooze function. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
Product Overview
The SODANY Projection Alarm Clock is designed for convenience and portability, operating solely on batteries. Its key features include:
- Smart Touch/Vibration Activation: Display and projection activate for a few seconds with a gentle touch or tap, then turn off to conserve battery.
- Battery Operation: Requires 3 AAA batteries (not included), offering complete portability without the need for power cables.
- Adjustable Projection: Projects time onto a wall or ceiling. Features a manual focus wheel for clarity.
- Comprehensive LCD Display: Shows time (12/24h), date, day of the week, and indoor temperature (°C/°F).
- Alarm with Snooze: Includes an alarm function with a snooze option for gradual awakening.

This image shows the SODANY Projection Alarm Clock with its key dimensions labeled, indicating a width of 14.7 cm, a height of 7.7 cm, and a depth of 4.2 cm. The clock features a large LCD display and a projection lens on the side.
Setup
- Unpacking: Carefully remove the alarm clock from its packaging. Inspect for any damage.
- Battery Installation: Locate the battery compartment on the back or bottom of the device. Insert 3 new AAA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
- Initial Power On: Upon battery insertion, the clock will power on and the display may briefly illuminate.
- Placement: Place the alarm clock on a stable, flat surface such as a bedside table. Ensure the projection lens (located on the side) is facing the desired projection surface (wall or ceiling).
Operating Instructions
- Activating Display and Projection: Gently tap the top of the clock or the surface it rests on. The LCD display and projection will illuminate for a few seconds and then turn off automatically. This feature conserves battery life.
- Setting Time and Date: Refer to the buttons on the back or bottom of the clock. Typically, there are buttons labeled 'MODE', 'SET', 'UP', 'DOWN'.
- Press 'MODE' to cycle through time, date, and alarm settings.
- When the desired setting (e.g., time) is flashing, use 'UP'/'DOWN' to adjust the values.
- Press 'SET' or 'MODE' again to confirm and move to the next setting.
- To switch between 12-hour and 24-hour format, adjust during time setting.
- Setting Alarm:
- Press 'MODE' until the alarm time is displayed.
- Use 'UP'/'DOWN' to set the desired alarm time.
- Press 'SET' to confirm.
- To activate/deactivate the alarm, look for an alarm icon on the display and a dedicated button (often labeled 'ALARM ON/OFF' or similar).
- Snooze Function: When the alarm sounds, press the 'SNOOZE/LIGHT' button on top of the clock to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
- Temperature Display: The clock automatically displays the indoor temperature. To switch between Celsius (°C) and Fahrenheit (°F), locate the °C/°F button, usually on the back or bottom.
- Adjusting Projection:
- The projection activates simultaneously with the screen when the clock is touched.
- Use the manual focus wheel located on the projection lens to adjust the sharpness of the projected numbers.
- The projection can be rotated by physically adjusting the angle of the projection lens.

A hand is shown gently touching the top of the SODANY Projection Alarm Clock, demonstrating its touch-activated feature. This action illuminates the display and activates the projection function.

This image illustrates the projection feature of the SODANY Alarm Clock, showing the time '12:36' clearly projected onto a bedroom ceiling. The projection is adjustable for focus and orientation.

The LCD screen of the SODANY Projection Alarm Clock is displayed, showing the current time (12:36 PM), date (12/28), day (Tuesday), and indoor temperature (28°C). This provides a comprehensive overview of information.
Maintenance
- Cleaning: Wipe the clock's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Battery Replacement: When the display dims or the clock functions become erratic, it is time to replace the batteries. Always replace all 3 AAA batteries at the same time with new ones.
- Storage: If the clock will not be used for an extended period, remove the batteries to prevent leakage and damage. Store the device in a cool, dry place.
Troubleshooting
- Display or Projection Not Activating:
- Ensure batteries are correctly installed and not depleted. Replace with fresh batteries if necessary.
- Confirm that the clock is being activated by a gentle touch on the top or a tap on the surface it rests on.
- Projection is Blurry:
- Adjust the manual focus wheel on the projection lens until the numbers appear clear.
- Projected Time Appears Inverted:
- The projection orientation is fixed. If the projected time appears inverted, physically rotate the clock to achieve the desired orientation.
- Alarm Not Sounding:
- Verify that the alarm is set and activated (check for the alarm icon on the display).
- Ensure batteries have sufficient power.
- Short Battery Life:
- Battery life can vary depending on usage frequency of the backlight and projection.
- Use high-quality alkaline batteries for optimal performance and longevity.
Specifications
| Brand | SODANY |
| Model Number | TS1466/1467 |
| Color | White |
| Display Type | Digital |
| Special Features | Alarm, Projection, Temperature Display, Date Display, Snooze, Touch/Vibration Activation |
| Product Dimensions (W x H x D) | 15.5 cm x 8.5 cm x 5 cm (approx. 15.5 cm width x 8.5 cm height) |
| Power Source | 3 x AAA Batteries (not included) |
| Material | Plastic |
| Item Weight | 200 Grams |
Warranty
This product is covered by a Manufacturer's Warranty. Please refer to the warranty information provided at the time of purchase for specific terms and conditions. The manufacturer guarantees the availability of spare parts in the EU for 3 years.
Support
For any questions, technical assistance, or warranty claims, please contact SODANY customer service through the retailer where the product was purchased. Please have your model number (TS1466/1467) and purchase details ready when contacting support.