YOLEO ITX320 Inversion Table User Manual

Introduction

The YOLEO ITX320 Inversion Table is designed to assist in spinal decompression and back pain relief through inversion therapy. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your inversion table. Please read all instructions carefully before use.

Key features include:

• Wider, comfortable backrest with adjustable headrest.
• Removable lumbar pad for enhanced support.
• Four-position adjustable pin system for easy and safe inversion.
• Foldable design for convenient storage.
• Improved ergonomic ankle holding system to reduce pressure.
• Accommodates users from 4ft-10in to 6ft-6in with a maximum weight capacity of 300 lbs.

Important Safety Information

WARNING: Consult with a licensed physician before using this inversion table. Certain medical conditions may not be suitable for use with this product. Always ensure the inversion table is properly assembled and adjusted to your height and weight before each use. Do not exceed the maximum weight capacity of 300 lbs.

Always ensure the ankle holding system is securely fastened before inverting. Use the safety pin adjustment system to control your inversion angle. Begin with small angles and gradually increase as comfort allows.

Setup and Assembly

The YOLEO ITX320 Inversion Table is designed for easy assembly. Follow the detailed instructions provided in the separate assembly guide included with your product. Ensure all bolts and fasteners are tightened securely before initial use.

Height Adjustment

Locate the easy height selector rod on the main frame. Adjust the rod to match your height. The table accommodates users between 4ft-10in and 6ft-6in. Ensure the adjustment pin is fully engaged in the correct hole for your height.

Figure 1: Key adjustable features including headrest, height selector, safety pin, and lumbar support.

Adjustable Headrest and Lumbar Pad

The headrest can be adjusted up or down to provide optimal neck support. The removable lumbar pad offers additional comfort and support for your lower back. Position it according to your preference.

Operating Instructions

Securing Your Ankles

Before each inversion, ensure your ankles are securely fastened in the ergonomic ankle holding system. This system is designed to minimize pressure on your ankles during inversion. Pull the lever to open the holders, insert your feet, and then push the lever back to lock them in place. Verify they are tight and secure.

Figure 2: Detail of the improved ankle holding system for secure and comfortable use.

Inversion Process

1. Stand on the inversion table with your back against the backrest and your feet secured in the ankle holders.
2. Adjust the four-position adjustable pin system to your desired inversion angle (90°, 120°, 150°, or 180°). Start with a shallower angle (e.g., 90° or 120°) if you are new to inversion therapy.
3. Slowly lean back, allowing the table to rotate. Use the handles for control and balance.
4. To return to the upright position, slowly pull yourself up using the handles. The table will rotate back to its starting position.

Figure 3: Demonstrating multi-position adjustable inversion angles.

Folding for Storage

The inversion table can be folded for compact storage. Refer to your assembly guide for specific folding instructions. Ensure the table is stable and secured in its folded position to prevent accidental unfolding.

Figure 4: The inversion table in its folded state, highlighting its space-saving design.

Maintenance

Regular maintenance ensures the longevity and safe operation of your YOLEO ITX320 Inversion Table.

• Cleaning: Wipe down the frame and backrest with a damp cloth after each use. Avoid abrasive cleaners.
• Inspection: Periodically check all bolts, nuts, and pins to ensure they are tight and secure. Inspect the ankle holding system for any signs of wear or damage.
• Lubrication: Apply a small amount of silicone-based lubricant to moving parts if you notice any squeaking or stiffness.
• Storage: Store the inversion table in a dry, cool place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

Warranty Description: This YOLEO Inversion Table comes with a 2-Year Warranty.

Return Policy: Eligible for Return, Refund, or Replacement within 30 days of receipt.

Customer Support: For additional information or assistance with your product, please contact the manufacturer directly at: homegym.service@outlook.com.