Introduction
The Queenmew H1 Ultrasonic Dog Bark Deterrent Device is designed to help manage excessive barking and destructive chewing behaviors in dogs using safe, dog-friendly ultrasonic sound waves. This device offers three adjustable frequency modes to suit different dog sizes and temperaments, covering a range of up to 33 feet. It is designed for both indoor and outdoor use with an IP65 waterproof housing and operates automatically once activated. The ultrasonic sound is inaudible to humans, ensuring a peaceful environment for both pets and owners.
Package Contents
- Queenmew H1 Ultrasonic Dog Bark Deterrent Device
- USB Charging Cable
- Mounting Screws and Anchors
- User Manual
Image: The Queenmew H1 device, USB charging cable, mounting hardware, and user manual included in the package.
Setup
- Initial Charging: Before first use, fully charge the device. Connect the provided USB cable to the charging port on the side of the device and plug the other end into a USB power adapter (not included) or a computer USB port. The red light indicates charging. A blue light indicates a full charge. A red flashing light indicates low battery.
Image: The device being charged via USB, with indicator lights showing charging status.
- Placement: Position the device in an area where your dog's barking is most frequent. Ensure the device faces the direction of the barking. It can be mounted on a wall, fence, or tree using the provided screws and anchors, or simply placed near your dog's kennel. Avoid placing it behind obstacles that might block the ultrasonic waves.
Image: Examples of device placement indoors and outdoors, including wall mounting and placement near a dog.
Operating Instructions
- Power On/Off: Press the "ON/OFF MODE" button to turn the device on or off.
- Select Frequency Mode: The device offers three adjustable ultrasonic frequency modes:
- 15KHz: Suitable for small or sensitive dogs.
- 20KHz: Suitable for medium or docile dogs.
- 30KHz: Suitable for large or excited dogs.
Image: The device displaying its three frequency modes (15KHz, 20KHz, 30KHz) and their recommended use for different dog types.
- Automatic Activation: Once powered on and a frequency is selected, the device will automatically detect dog barking within its 33-foot range and emit an ultrasonic sound to deter the barking. The sound is designed to be unpleasant to dogs but harmless and inaudible to humans.
- Training Period: Allow up to 2 weeks for your dog to adapt to the device. Some dogs may show initial curiosity or slight resistance. Consistent use will help them associate their barking with the ultrasonic sound and modify their behavior.
Video: This video demonstrates the Queenmew H1 Ultrasonic Dog Bark Deterrent Device in action, showing how it activates in response to dog barking and its effect on the dog's behavior. It also highlights the device's features and ease of use.
Video: This video provides a detailed overview of the Ultrasonic Dog Bark Deterrent, including unboxing, setup, and demonstration of its functionality. It shows the device's design, charging process, and how it can be used to manage dog barking.
Important Considerations
- Do not use the device while it is charging.
- Ensure the sensor faces the barking direction for optimal effect.
- Low battery or obstacles can decrease the effectiveness of the device.
- Each dog has a different learning speed; allow up to 2 weeks for adaptation.
- The range of ultrasonic penetration is affected by the environment; a smaller range may yield better results in some settings.
- It is best to turn on the device only when the dog is barking excessively and turn it off when the dog is quiet to avoid affecting daily life.
Image: Scenarios where the device may not be effective or is not recommended, including dogs with hearing problems, dogs under 6 months or over 8 years old, noisy environments, and areas with many obstacles.
Maintenance
- Cleaning: Wipe the device with a soft, dry cloth to remove dust or dirt. Do not use harsh chemicals or abrasive cleaners.
- Battery Life: The built-in 1500mAh battery lasts up to 30 days per charge. Recharge as needed to maintain optimal performance.
- Weather Resistance: The IP65 waterproof rating means the device can withstand rain and snow. However, avoid submerging it in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not activating when dog barks. | Low battery; device not facing barking direction; too many obstacles; dog is out of range. | Charge the device fully. Adjust placement to face the dog directly. Remove obstacles. Ensure dog is within 33-foot range. |
| Dog not responding to the device. | Incorrect frequency mode selected; dog needs more adaptation time; dog has hearing problems; dog is too young/old. | Try a different frequency mode. Allow up to 2 weeks for training. Consult a veterinarian if you suspect hearing issues. Note that the device is not recommended for dogs under 6 months or over 8 years old. |
| Red light flashing. | Low battery. | Recharge the device. |
Specifications
- Product Name: Anti Barking Device X2 (Queenmew H1)
- Input Voltage: 3.7V
- Battery: 1500mAh Lithium Ion (included)
- Sensor Distance: Up to 33ft (approx. 10 meters)
- Ultrasonic Frequency: 15KHz-30KHz (3 adjustable modes)
- Waterproof Rating: IP65
- Item Weight: 0.176 ounces (5 Grams)
- Dimensions: 5.12 x 4.13 x 1.89 inches
- Manufacturer: Queenmew
- Model Number: H1
Warranty and Support
The Queenmew H1 Ultrasonic Dog Bark Deterrent Device comes with a 1-year warranty and a 30-day unconditional return policy. For any questions, technical support, or warranty claims, please contact Queenmew customer service through the retailer where the product was purchased. Please refer to the contact information provided with your purchase or visit the official Queenmew website for support details.