Electactic YT-E-015

Download PDF
Contents

Electactic Bullet Ice Maker YT-E-015 User Manual

Model: YT-E-015

Introduction

Thank you for choosing the Electactic Bullet Ice Maker. This compact countertop ice maker is designed to provide you with fresh bullet-shaped ice quickly and efficiently. Please read this manual thoroughly before operating your new ice maker to ensure safe use, optimal performance, and proper maintenance. Keep this manual for future reference.

Important Safety Instructions

  • Read all instructions before use.
  • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
  • Do not immerse the appliance, power cord, or plug in water or other liquids.
  • Ensure the ice maker is placed on a stable, level surface away from direct sunlight and heat sources.
  • Use only potable water in the ice maker.
  • Unplug the appliance before cleaning or when not in use for extended periods.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Product Overview

Familiarize yourself with the components of your Electactic Bullet Ice Maker.

Electactic Bullet Ice Maker front view

Figure 1: Front view of the Electactic Bullet Ice Maker.

Components:

  • Ice Machine Unit
  • Removable Ice Basket
  • Ice Scoop
  • Removable Lid
  • Control Panel with Indicator Lights (ICE FULL, ADD WATER, WORK)

Setup

  1. Unpacking: Carefully remove the ice maker from its packaging. Ensure all accessories (ice basket, scoop, manual) are present.
  2. Placement: Place the ice maker on a flat, stable surface. Allow at least 4 inches of clearance around the unit for proper ventilation. Avoid placing it near heat sources or in direct sunlight.
  3. First Use Preparation: Before first use, clean the interior of the ice maker. Refer to the "Maintenance" section for detailed cleaning instructions.
  4. Add Water: Open the lid and fill the water reservoir with potable water up to the MAX fill line. Do not overfill.
Electactic Ice Maker with pull-out ice basket

Figure 2: The convenient pull-out ice basket design for easy access.

Video 1: An overview of the Electactic Bullet Ice Maker, demonstrating its features and initial setup steps.

Operating Instructions

  1. Power On: Plug the ice maker into a grounded electrical outlet. Press the Power button (Ⓘ) to turn on the unit. The "WORK" indicator light will illuminate.
  2. Ice Production: The ice maker will automatically begin the ice-making cycle. The first batch of bullet ice typically takes 6-8 minutes.
  3. Ice Full Indicator: When the ice basket is full, the "ICE FULL" indicator light will turn on, and the ice making process will pause. Remove ice from the basket to resume operation.
  4. Add Water Indicator: If the water level in the reservoir is too low, the "ADD WATER" indicator light will illuminate. Add more potable water to the reservoir to continue ice production.
  5. Power Off: To stop ice production, press the Power button (Ⓘ) again.
Electactic Ice Maker control panel with indicator lights

Figure 3: Control panel with Power, ICE FULL, ADD WATER, and WORK indicators.

Electactic Ice Maker showing fast bullet ice making process

Figure 4: Illustration of the fast bullet ice making process, producing 6 pieces in 6-8 minutes.

Electactic Ice Maker operating at low noise level

Figure 5: The ice maker operates quietly, typically below 40dB.

Maintenance

Regular cleaning and maintenance will prolong the life of your ice maker and ensure hygienic ice production.

Self-Cleaning Function:

  1. Ensure the water reservoir is filled with clean water.
  2. Press and hold the Power button (Ⓘ) for 3 seconds to activate the self-cleaning mode.
  3. The unit will perform a 5-minute cleaning cycle.
  4. After the cycle, drain the water from the unit by removing the drain plug located at the bottom.
Electactic Ice Maker showing one-touch self-cleaning feature

Figure 6: The ice maker features a one-touch self-cleaning function.

Manual Cleaning:

  1. Unplug the ice maker from the power outlet.
  2. Remove the ice basket and the removable lid.
  3. Clean the interior of the water reservoir and ice basket with a soft cloth and mild detergent. Rinse thoroughly with clean water.
  4. Wipe the exterior with a damp cloth.
  5. Ensure all parts are dry before reassembling and storing or using the unit.
Electactic Ice Maker with removable lid for easy cleaning

Figure 7: The removable lid allows for easy manual cleaning of the ice-making chamber.

Electactic Ice Maker showing two cleaning modes: self-cleaning and hand-cleaning

Figure 8: The ice maker supports both self-cleaning and manual hand-cleaning for comprehensive hygiene.

Troubleshooting

Problem Possible Cause Solution
"ADD WATER" indicator is on. Water reservoir is empty or water level is too low. Add potable water to the reservoir up to the MAX fill line.
"ICE FULL" indicator is on. Ice basket is full. Remove ice from the basket. The unit will resume ice production automatically.
Ice maker is not producing ice. No water, power issue, or ambient temperature is too high. Check water level, ensure unit is plugged in, and operate in a cooler environment.
Ice cubes are too small or clumpy. Water temperature is too high, or mineral buildup. Use colder water. Perform a cleaning cycle to remove mineral buildup.
Unusual noise during operation. Unit not level, or internal components require cleaning. Ensure the unit is on a level surface. Perform a cleaning cycle. If noise persists, contact customer support.

Specifications

Brand Electactic
Model Name YT-E-015
Product Dimensions (D x W x H) 12.99"D x 7.68"W x 14.96"H
Ice Production per Day 18 pounds
Capacity (Water Reservoir) 1.0 L (approximate, based on ice production)
Wattage 115 watts
Voltage 115 volts
Item Weight 12 pounds
Material Type Plastic, Stainless Steel
Refrigerant R600a

Warranty

The Electactic Bullet Ice Maker is backed by a 1-year warranty. For specific terms and conditions, please refer to the warranty card included with your product or contact Electactic customer support.

Customer Support

If you have any questions, require assistance, or need to claim warranty service, please contact Electactic customer support. Refer to the contact information provided in your product packaging or visit the official Electactic website for support details.

For more information, you can visit the Electactic Store on Amazon.

© 2026 Electactic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.