HOOMIC Lift Up Storage King Size Bed Frame Instruction Manual

Introduction

Thank you for choosing the HOOMIC Lift Up Storage King Size Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This bed frame is designed to offer both comfort and practical storage solutions, featuring a hydraulic lift mechanism for under-bed storage, a built-in charging station, and a storage headboard.

Safety Information

• Always assemble the bed frame on a soft, clean surface to prevent damage to components.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not allow children to play on or around the lift mechanism. Keep hands and fingers clear when operating the lift.
• Do not exceed the maximum weight recommendation of 800 pounds for the bed frame.
• Use only the provided hardware. Substituting parts may compromise safety and void the warranty.
• Keep electrical components (charging station) away from liquids. Do not overload the power outlets.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Bed Frame Components
• Headboard with Storage and Charging Station
• Hydraulic Lift Bars (2)
• Slats and Slat Holders
• Assembly Hardware (bolts, screws, washers, Allen wrench)

Setup and Assembly

Assembly typically requires two adults and takes approximately 1-2 hours. Do not use power tools for assembly as this may overtighten and damage components.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to identify each piece and ensure nothing is missing.
2. Assemble Headboard: Attach the headboard legs to the main headboard panel using the provided bolts and Allen wrench. Ensure the charging station is correctly oriented.
3. Connect Side Rails: Attach the side rails to the assembled headboard and footboard (if separate) using the appropriate hardware. Do not fully tighten bolts until all major components are connected.
4. Install Center Support: Assemble and install any central support beams or legs as indicated in the detailed diagram (refer to included paper manual for diagrams).
5. Attach Hydraulic Lift Mechanism: Securely attach the hydraulic lift bars to the bed frame side rails and the mattress support frame. Follow the specific instructions for the lift mechanism to ensure correct and safe operation.
6. Place Slats: Lay the wooden slats across the bed frame, securing them with the plastic slat holders or screws as directed. Ensure even spacing for optimal mattress support.
7. Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws. Do not overtighten.
8. Connect Power: Plug the charging station's power cord into a wall outlet.

Operating Instructions

Using the Lift-Up Storage

The bed frame features a hydraulic lift mechanism for easy access to under-bed storage. Ensure the mattress is on the frame before operating the lift.

1. To Open: Stand at the foot of the bed. Firmly grasp the handle or edge of the mattress support frame. Lift upwards with a steady motion. The hydraulic pistons will assist in lifting and holding the frame in the open position.
2. To Close: Gently pull the mattress support frame downwards. Apply even pressure until the frame fully lowers and rests on the bed frame. Do not force it down.

Caution: Do not place heavy objects on the mattress support frame when lifting or lowering. Keep children and pets away from the bed during operation.

Using the Charging Station

The integrated charging station in the headboard provides convenient power access.

• Ensure the bed frame's power cord is securely plugged into a functional wall outlet.
• Use the USB ports, Type-C port, and standard power outlets to charge your electronic devices.
• Do not exceed the maximum power rating of the charging station.

Maintenance

• Cleaning: For the velvet upholstery, gently vacuum with a soft brush attachment to remove dust. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner. Do not use harsh chemicals.
• Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and prevent noise.
• Hydraulic Mechanism: The hydraulic pistons are designed for long-term use and generally require no maintenance. If you notice a significant change in lift resistance or function, contact customer support. Do not attempt to lubricate or disassemble the pistons.
• Charging Station: Keep the charging ports free of dust and debris. Unplug the bed frame from the wall outlet before cleaning the headboard.

Troubleshooting

Specifications

• Model Number: KRQSCZW003
• Size: King
• Material: Velvet
• Product Dimensions (L x W x H): 84.06" x 79.73" x 45.27"
• Item Weight: 126.8 Pounds
• Maximum Weight Recommendation: 800 Pounds
• Special Features: Charging Station (USB, Type-C, Power Outlets), Lift Up Storage, Squeak Resistant, Storage Headboard
• Assembly Required: Yes

Warranty and Support

For warranty information or if you encounter any issues not covered in this manual, please contact HOOMIC customer support. Have your model number (KRQSCZW003) and purchase details ready when contacting support.

You can typically find support contact information on the retailer's website or on the original product packaging.