Osprey Tempest 24 Backpack Instruction Manual

1. Introduction

The Osprey Tempest 24 is a versatile technical backpack designed for outdoor activities. It features a sustainable design utilizing recycled high-tenacity nylon, a BioStretch harness, a continuous-wrap hipbelt, and an injection-molded, die-cut foam AirScape® backpanel for comfort and stability during various pursuits. This manual provides essential information for the proper setup, operation, maintenance, and care of your Tempest 24 backpack.

Image 1: Front view of the Osprey Tempest 24 backpack, showcasing its sleek design and main features.

2. Setup and Fit Adjustment

Proper fit is crucial for comfort and stability. The Tempest 24 features an adjustable harness and hipbelt system.

2.1 Torso Length Adjustment

The AirScape® backpanel allows for torso length adjustment to ensure the pack sits correctly on your back.

1. Loosen all straps: shoulder straps, load lifters, and hipbelt.
2. Locate the hook-and-loop closure behind the shoulder harness.
3. Adjust the harness up or down until the top of the shoulder straps are approximately 1-2 inches below the top of your shoulders.
4. Ensure the hipbelt pads wrap comfortably around your iliac crest (hip bones).
5. Secure the hook-and-loop closure firmly.

2.2 Hipbelt Adjustment

The continuous-wrap hipbelt distributes weight effectively to your hips.

1. Fasten the hipbelt buckle and tighten the straps until the hipbelt is snug and comfortable around your hips. Approximately 60-80% of the pack's weight should rest on your hips.

2.3 Shoulder Strap and Load Lifter Adjustment

These straps fine-tune the pack's position and stability.

1. Tighten the shoulder straps until the pack feels secure against your back. Avoid overtightening, as this shifts weight off your hips.
2. Adjust the load lifter straps (located above the shoulder straps, connecting to the top of the pack) to pull the pack closer to your body. These should be at a 45-degree angle.
3. Fasten the sternum strap across your chest and adjust its height for comfort.

Image 2: Rear view of the Osprey Tempest 24, highlighting the adjustable BioStretch harness and AirScape® backpanel for customized fit.

3. Operating and Features

The Tempest 24 is equipped with several features designed for convenience and organization.

• Main Compartment: Access the primary storage area via the main zipper. This is suitable for larger items like clothing, food, or additional gear.
• Internal Padded Laptop Sleeve: A dedicated sleeve inside the main compartment provides protection for a laptop or tablet.
• Side Stretch Mesh Pockets: Located on both sides of the pack, these pockets are ideal for water bottles or other items requiring quick access.
• LidLock Bike Helmet Attachment: A simple and secure system on the front of the pack allows you to attach a bike helmet when not in use. Locate the small elastic cord and clip to secure your helmet.
• Blinkie Light Attachment: A small loop near the bottom of the pack is provided for attaching a blinkie light, enhancing visibility in low-light conditions.
• Hipbelt Pockets: Zippered pockets on the hipbelt offer convenient storage for small essentials like snacks, a phone, or keys, keeping them accessible while wearing the pack.
• Front Shove-It Pocket: A large, open stretch mesh pocket on the front of the pack is useful for stashing a jacket, map, or other items you need to quickly access or shed.

Image 3: Side view of the Osprey Tempest 24, illustrating the side stretch mesh pockets and other external attachment points.

3.1 Product Overview Video

4. Maintenance

Proper care will extend the life of your Osprey Tempest 24 backpack.

4.1 Cleaning Instructions

• Spot Cleaning: For minor dirt or stains, use a damp cloth with mild soap. Gently scrub the affected area and rinse with clean water.
• Machine Wash: The manufacturer recommends machine washing. Before washing, remove any detachable components. Use a gentle cycle with cold water and a mild detergent. Air dry the backpack completely; do not use a dryer, as high heat can damage materials and coatings.
• Drying: Hang the backpack upside down in a well-ventilated area, away from direct sunlight or heat sources, to ensure thorough drying.

4.2 Storage

Store your backpack in a cool, dry place away from direct sunlight when not in use. Ensure it is completely dry before storing to prevent mildew.

5. Troubleshooting

If you encounter issues with your backpack, consider the following common solutions.

• Discomfort or Poor Fit: Re-evaluate your torso length, hipbelt, and shoulder strap adjustments as described in Section 2. Ensure the hipbelt is bearing most of the weight.
• Squeaking Noises: This can sometimes occur with new packs or when straps are not properly tensioned. Check all buckles and straps for proper seating and tension. A small amount of silicone spray on friction points can sometimes help.
• Zipper Issues: If a zipper snags, gently pull the fabric away from the zipper teeth and try to move the slider. Avoid forcing it. Keep zippers clean and free of debris.
• Water Repellency Reduction: Over time, the DWR (Durable Water Repellent) coating may wear off. The pack can be re-treated with a DWR spray product designed for outdoor gear.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

The Osprey Tempest 24 backpack comes with a Lifetime Warranty covering defects in materials and workmanship. This warranty ensures that your product is free from manufacturing defects for its reasonable lifetime. For specific details regarding warranty claims, please refer to the official Osprey website or contact their customer service.

7.2 Customer Support

For further assistance, product inquiries, or warranty service, please contact Osprey customer support directly. Contact information can typically be found on the official Osprey website.