1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Meliconi Floor600 TV Floor Stand. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to support televisions ranging from 40 to 70 inches with VESA mounting patterns of 300x300, 400x400, and 600x400 mm, and a maximum weight capacity of 45 kg.
2. Safety Information
WARNING: Failure to read and follow all instructions can result in personal injury or property damage. The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
- Ensure the floor stand is placed on a stable, level surface.
- Do not exceed the maximum weight capacity of 45 kg (99 lbs).
- Verify your TV's VESA pattern and weight are compatible with this stand before installation.
- Keep children and pets away from the stand during assembly.
- Use all provided hardware. Do not substitute parts.
- Periodically check all screws and connections to ensure they remain secure.
- Avoid placing heavy objects on the stand's base or TV.
- Do not attempt to move the stand with the TV attached without assistance.
3. Product Overview
The Meliconi Floor600 is a robust floor stand designed for large flat-panel televisions. It features a durable steel structure and an elegant tempered glass base for stability. The stand offers adjustable height, tilt, and rotation functions for optimal viewing angles. Integrated cable management helps maintain a tidy appearance.
Key Features:
- Universal compatibility for TVs 40" to 70".
- VESA compatibility: 300x300, 400x400, 600x400 mm.
- Maximum load capacity: 45 kg.
- Adjustable height (95 cm, 99 cm, 103 cm).
- Tilt and rotation functionality.
- Tempered glass base with anti-slip and anti-scratch pads.
- Integrated cable management system.
- Protective foam on the bracket to prevent TV scratches.
4. Setup and Assembly
Before starting, ensure you have all components and tools. It is recommended to have two people for assembly, especially when mounting the TV.
4.1 Package Contents (Typical)
- Tempered Glass Base
- Upright Support Pole
- TV Mounting Bracket
- TV Mounting Arms (2x)
- Hardware Kit (screws, washers, spacers, anti-slip pads)
- Cable Management Clips/Covers
- Instruction Manual
4.2 Assembly Steps
- Attach Anti-Slip Pads to Base: Carefully place the tempered glass base on a soft, clean surface. Attach the provided anti-slip and anti-scratch pads to the bottom corners of the glass base.
- Assemble Base and Upright Pole: Secure the upright support pole to the tempered glass base using the designated screws and washers from the hardware kit. Ensure all connections are tight.
- Attach TV Mounting Bracket to Pole: Slide the main TV mounting bracket onto the upright support pole. Adjust it to your desired initial height (95 cm, 99 cm, or 103 cm) and secure it firmly with the provided bolts.
Image: The main TV mounting bracket with adjustable arms, ready for TV attachment. - Attach Mounting Arms to TV:
- Identify the VESA mounting holes on the back of your television.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
- Attach the two TV mounting arms to the back of your TV. Ensure the arms are oriented correctly so they can hook onto the main mounting bracket. The protective foam on the arms should face the TV.
- Mount TV to Stand: With assistance, carefully lift the television and hook the mounting arms onto the main TV mounting bracket on the stand. Ensure the TV is securely seated. Fasten any safety screws or locking mechanisms to prevent accidental dislodging.
Image: A television mounted on the Meliconi Floor600 stand, illustrating the rear mounting mechanism. - Cable Management: Route all TV and device cables through the integrated cable management system on the upright pole. Use the provided clips or covers to keep cables neat and organized.
5. Operating Instructions
5.1 Adjusting TV Height
The TV mounting bracket can be set at three different heights: 95 cm, 99 cm, and 103 cm (measured from the floor to the center of the VESA mounting area). To adjust the height, you will need to loosen the bolts securing the main TV mounting bracket to the upright pole, reposition it, and then re-tighten the bolts firmly. It is recommended to remove the TV before adjusting the height for safety.
5.2 Adjusting TV Tilt
The TV can be tilted to achieve the optimal viewing angle. Locate the tilt adjustment knobs or levers on the side of the TV mounting bracket. Loosen these, adjust the TV to the desired tilt angle, and then securely tighten the knobs/levers to lock the position.
5.3 Adjusting TV Rotation
The TV can be rotated horizontally to face different directions. Gently rotate the television to the desired angle. Ensure the base remains stable and does not lift or slide during rotation. Avoid excessive force.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the stand. For stubborn marks on the steel or glass, a slightly damp cloth with mild detergent can be used, followed by drying. Avoid abrasive cleaners or solvents.
- Check Connections: Periodically (e.g., every 3-6 months) check all screws and bolts to ensure they are still tight and secure. Re-tighten if necessary.
- Cable Management: Ensure cables are not pinched or strained. Re-route if needed.
7. Troubleshooting
- TV feels unstable after mounting:
- Ensure all assembly screws, especially those connecting the pole to the base and the bracket to the pole, are fully tightened.
- Verify the TV's weight does not exceed 45 kg.
- Confirm the TV mounting arms are correctly hooked onto the main bracket and any safety screws are engaged.
- Ensure the stand is on a flat, level surface.
- Difficulty adjusting tilt or rotation:
- For tilt, ensure the adjustment knobs/levers are sufficiently loosened before attempting to change the angle.
- For rotation, ensure no cables are snagged or preventing movement. Do not force the rotation.
- Scratches on floor:
- Ensure the anti-slip/anti-scratch pads are correctly installed on the bottom of the tempered glass base.
- Avoid dragging the stand; lift it when moving.
8. Specifications
| Brand | Meliconi |
| Model | Floor600 |
| Mounting Type | Floor Stand |
| Movement Type | Tilt, Rotation |
| Compatible TV Sizes | 40" - 70" |
| VESA Compatibility | 300x300, 400x400, 600x400 mm |
| Maximum Load Capacity | 45 kg (99 lbs) |
| Adjustable Height | 95 cm, 99 cm, 103 cm |
| Material | Steel, Tempered Glass |
| Color | Black |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Meliconi website. Keep your proof of purchase for warranty claims.
