Introduction
Thank you for choosing the LITTLE TREE 55-Inch TV Stand / Console Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use. Do not overtighten screws.
- Do not exceed the maximum weight recommendation of 110 pounds (50 kg) for the tabletop.
- Keep small parts and packaging materials away from children and pets.
- Periodically check all connections to ensure they remain tight.
- This product is designed for indoor use only.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
Parts List:
- Top Panel (1)
- Bottom Panel (1)
- Side Panels (2)
- Middle Shelf (1)
Hardware List:
- Screws (various types and quantities)
- Dowel Pins
- Cam Locks and Cam Bolts
- Floor Protector Pads (4)
- Allen Wrench (if required)
Note: Specific quantities and types of hardware may vary slightly. Refer to the included assembly guide for precise details.
Setup and Assembly Instructions
Assembly is required for this product. A screwdriver is recommended. Follow these general steps, referring to the detailed assembly guide included in your package for specific diagrams and hardware placement.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Identify each part using the provided parts list.
- Attach Side Panels to Bottom Panel: Secure the side panels to the bottom panel using the designated screws and dowel pins. Ensure they are aligned correctly.
- Insert Middle Shelf: Slide the middle shelf into the grooves or attach it to the pre-drilled holes on the side panels. Secure with appropriate hardware.
- Attach Top Panel: Place the top panel onto the assembled structure, aligning it with the side panels. Secure it firmly with screws and cam locks as per the instructions.
- Attach Floor Protector Pads: Apply the protective floor pads to the bottom corners of the console table to prevent scratching your floors.
- Final Check: Once assembled, gently lift and move the unit to its desired location. Ensure all connections are tight and the table is stable.
Image 1: Detailed dimensions of the LITTLE TREE 55-Inch TV Stand. The stand measures 55.12 inches in width, 31.5 inches in height, and 11.81 inches in depth. The open shelves are approximately 37.8 inches wide and 11.42 inches high.
Image 2: Various perspectives of the console table, including side, front, top, and back views, illustrating its design and structure from all angles.
Image 3: A close-up view highlighting the protective floor pads installed on the base of the console table, designed to prevent scratches and damage to flooring.
Operating and Usage
The LITTLE TREE 55-Inch TV Stand / Console Table is designed for versatile use in various living spaces.
- Placement: Position the console table on a flat, stable surface. It can be used as a TV stand for TVs up to 60 inches, a sofa console table, an entryway table, or a buffet sideboard.
- Weight Capacity: The maximum weight recommendation for the top surface is 110 pounds (50 kg). Distribute weight evenly across the shelves and top surface.
- Storage: Utilize the two open shelves for organizing media devices, books, decorative items, or storage baskets.
Image 4: This image illustrates key design features including the striped side accent, the elegant wood grain finish, and the protective floor pads for stability and floor protection.
Maintenance and Care
- Cleaning: Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Spills: Clean up spills immediately to prevent staining, as the product is not stain resistant.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or warping of the wood.
- Heat and Moisture: Keep the table away from direct heat sources and excessive moisture. Use coasters under drinks to protect the surface.
- Periodic Checks: Periodically inspect all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly after assembly. | Screws or connections are not fully tightened. Uneven floor surface. | Ensure all screws and cam locks are securely tightened. Adjust floor protector pads or place shims under the legs if the floor is uneven. |
| Parts do not align during assembly. | Incorrect orientation of parts. Missing dowel pins or misaligned holes. | Double-check the assembly guide for correct part orientation. Ensure dowel pins are fully inserted and holes are aligned before tightening. |
| Scratches on the surface. | Abrasive cleaning materials used. Sharp objects placed directly on the surface. | Use only soft cloths for cleaning. Place protective mats or coasters under items that may scratch the surface. |
Specifications
- Brand: LITTLE TREE
- Model Number: LD0117
- Product Dimensions (D x W x H): 11.81" x 55.12" x 31.5"
- Item Weight: 62.7 Pounds (28.44 kg)
- Maximum Weight Recommendation: 110 Pounds (50 kg)
- Frame Material: Engineered Wood
- Color: Brown (Rustic Brown finish)
- Table Design: Console Table / TV Stand
- Assembly Required: Yes
- Tools Recommended: Screw Driver
- Special Features: Easy Assembly, Scratch Resistant (to a degree, but not stain resistant), Space Saving
- Indoor/Outdoor Usage: Indoor Only
Warranty and Support
LITTLE TREE products are manufactured with quality and care. For specific warranty details, please refer to the documentation included with your purchase or contact LITTLE TREE customer support directly. If you encounter any issues or require assistance with assembly or parts, please reach out to the retailer or manufacturer's customer service department.
Contact Information: Please refer to your purchase receipt or the product packaging for the most up-to-date customer support contact details.