1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Garvee XL Double Dog Crate Furniture. This product is designed to serve as a secure enclosure for two medium to large dogs and can also function as a furniture piece, such as a TV stand or sideboard. Please read all instructions carefully before assembly and use to ensure proper function and safety.
Image 1.1: The Garvee XL Double Dog Crate Furniture can be utilized as a display stand, TV stand, or plant stand.
2. Safety Information
- Ensure all parts are securely fastened before allowing pets inside the crate.
- Do not exceed the recommended weight capacity for the top surface when using as a TV stand or display unit.
- Regularly inspect the crate for any loose or damaged parts. Discontinue use if damage is found and contact customer support for replacement parts.
- Keep small children away from the assembly area. Small parts may pose a choking hazard.
- This product is intended for indoor use only.
- Ensure adequate ventilation for pets inside the crate.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. Each part is pre-numbered for easy identification.
- Wooden Panels (Top, Bottom, Side, Back)
- Metal Pipe Grids (Doors, Side Panels)
- Metal Legs
- Partition Door (Optional)
- Assembly Hardware (Screws, bolts, nuts, washers, Allen wrench)
- Instruction Manual
4. Setup and Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Unpack and Identify Parts: Lay out all components and hardware. Refer to the included parts list to ensure everything is accounted for.
- Assemble Base Frame: Attach the metal legs to the bottom wooden panel using the provided screws. Ensure they are tightened securely.
- Attach Side Panels: Connect the side wooden panels and metal grid panels to the base.
- Install Partition (Optional): If using the partition, slide it into the designated slots in the middle of the crate.
- Install Doors: Attach the front and side metal doors to their respective hinges. Ensure smooth operation.
- Secure Top Panel: Place the top wooden panel onto the assembled structure and secure it with the remaining screws.
- Final Check: Verify that all screws are tightened and the structure is stable.
Image 4.1: The optional partition door allows for separation of the two crate compartments.
5. Operating Instructions
5.1 Door Operation
The Garvee XL Double Dog Crate features multiple access points for convenience and pet comfort.
- Front Doors: Each compartment has a front door that opens outwards. Use the secure latches to keep the doors closed.
- Side Doors: Each compartment also includes a side door, providing an alternative entry/exit point. These doors also feature secure latches.
Image 5.1: The crate offers both front and side door access for each dog compartment.
5.2 Using the Partition
The removable partition allows you to configure the crate for one large dog or two separate medium/large dogs. To remove or install the partition, ensure the crate is empty and carefully slide the partition out of or into its designated grooves.
6. Maintenance and Care
- Cleaning: Wipe down wooden surfaces with a damp cloth and mild cleaner. Dry immediately. Metal bars can be cleaned with a non-abrasive cleaner. Avoid harsh chemicals that may damage the finish or be harmful to pets.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten any loose fasteners as needed.
- Floor Protection: The crate features raised feet with anti-scratch pads to protect your flooring. Ensure these pads are intact.
Image 6.1: The 3.94-inch raised feet allow for robot vacuum cleaning underneath and feature anti-scratch pads.
7. Troubleshooting
- Crate is Wobbly: Ensure all screws are fully tightened. Check that the crate is on a level surface.
- Doors Not Closing Properly: Inspect hinges for any obstructions or misalignment. Ensure the latches are correctly aligned with their receivers.
- Missing Parts: If any parts are missing from the package, refer to the customer support section for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | pvCY3rGojunbo7FvL6z_HQux4ebC |
| Brand | Garvee |
| Overall Dimensions (L x W x H) | 78.74" x 27.55" x 33.46" |
| Item Weight | 122.36 Pounds |
| Material | Particleboard & Iron Pipe |
| Color | Rustic White |
| Breed Recommendation | Medium Large Dogs |
| Gap Size (between bars) | 0.5 Inches |
| Specific Uses | Indoor |
Image 8.1: Dimensional overview of the Garvee XL Double Dog Crate Furniture.
9. Warranty Information
Garvee products are manufactured with quality and durability in mind. For specific warranty details regarding your Garvee XL Double Dog Crate Furniture, please refer to the warranty card included in your package or visit the official Garvee website. Keep your proof of purchase for any warranty claims.
10. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Garvee customer support. You can typically find contact information on the Garvee brand store on Amazon or through the contact details provided in your product packaging.
For online support, visit the Garvee Store on Amazon.
