Important Safety Information
Before operating your URLIFE E20 electric bike, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage.
- Wear a Helmet: Always wear an approved helmet while riding.
- Obey Local Laws: Familiarize yourself with and obey all local traffic laws and regulations for electric bikes.
- Pre-Ride Check: Before each ride, inspect brakes, tires, battery, and all fasteners to ensure they are in good working order.
- Weather Conditions: Exercise caution when riding in wet conditions, snow, or on slippery surfaces.
- Night Riding: Use front and rear lights when riding at night or in low-light conditions.
- Weight Limit: Do not exceed the maximum load capacity of 265 pounds (120 kg) for the bike and its rack.
- Battery Care: Handle the battery with care. Do not puncture, drop, or expose it to extreme temperatures. Use only the provided charger.
- Children: This electric bike is designed for adults. Ensure riders are of appropriate age and skill level.
Product Overview
The URLIFE E20 electric bike is designed for versatile use, offering a comfortable and efficient riding experience with its powerful motor, long-range battery, and robust fat tires.
Video: An overview of the URLIFE E20 electric bike, demonstrating its features and use in various environments.
Package Contents
Upon unpacking, please verify that all the following items are included:
- URLIFE E20 Electric Bike (90% pre-assembled)
- 48V 13Ah Removable Battery
- Battery Charger
- Assembly Tool Kit
- User Manual
- Keys for Battery Lock
Setup and Assembly
Your URLIFE E20 electric bike comes 90% pre-assembled. Follow these steps to complete the assembly:
- Unpack: Carefully remove the bike and all components from the packaging.
- Handlebar Installation: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
- Front Wheel: Install the front wheel, making sure the disc brake rotor is correctly seated in the caliper.
- Pedals: Identify the left (L) and right (R) pedals. Thread them into the crank arms by hand, then tighten with a wrench. Note that the left pedal is reverse-threaded.
- Seat Post: Insert the seat post into the frame and adjust the height for comfortable riding. Secure it with the quick-release lever.
- Battery Installation: Insert the 48V 13Ah removable battery into its compartment and lock it with the key.
- Final Checks: Double-check all bolts, nuts, and quick releases for tightness. Ensure tires are inflated to the recommended pressure.
For visual guidance, refer to the assembly video provided by URLIFE or contact customer support if needed.
Components Overview
Motor
Image: Close-up view of the 1000W peak motor integrated into the rear wheel hub.
The URLIFE E20 features a powerful motor, providing assistance up to 28 MPH and enabling effortless climbing of inclines up to 30 degrees.
Battery
Image: Illustration of the 48V 13Ah removable battery with BMS safety protection and IP54 waterproof rating.
Equipped with a 48V 13Ah removable battery, the E20 offers a range of up to 80 miles on a single charge. The battery includes BMS (Battery Management System) for safety and is IP54 waterproof.
Tires and Suspension
Image: A 20-inch by 3-inch fat tire, demonstrating its suitability for various terrains including city roads, soil, sand, and snow.
The 20-inch by 3-inch fat tires provide enhanced traction and stability across diverse terrains, including snow, sand, and rough paths. The front fork suspension absorbs shocks, contributing to a smoother and more comfortable ride.
Image: Close-up of the front fork suspension system, designed to absorb impacts and reduce rider fatigue.
Smart LCD Display
Image: The IP54 waterproof color LCD display showing speed, battery indicator, PAS level, and trip mileage.
The IP54 waterproof LCD display provides real-time information such as current speed, battery level, Pedal Assist System (PAS) level, and trip distance, enhancing your riding awareness.
Braking System and Lights
The bike is equipped with dual disc brakes for reliable stopping power. Front and rear lights are integrated to improve visibility during night riding, ensuring safety.
Operating Instructions
Battery Installation and Removal
To install the battery, align it with the frame's battery slot and slide it in until it clicks into place. Use the key to lock it securely. To remove, unlock the battery with the key and slide it out.
Charging the Battery
Connect the charger to the battery charging port, then plug the charger into a power outlet. The indicator light on the charger will show the charging status. Charging typically takes 3-5 hours. Do not overcharge.
Powering On/Off
Press and hold the power button on the LCD display to turn the bike's electrical system on or off.
Using the LCD Display
The LCD display shows various riding parameters. Use the control buttons near the display to cycle through information, adjust PAS levels, and control lights.
Gear Shifting (7-Speed)
The URLIFE E20 features a 7-speed gear system. Use the shifter on the handlebars to change gears, allowing you to adapt to different terrains and riding conditions. Shift gears smoothly to avoid strain on the drivetrain.
Pedal Assist System (PAS)
The PAS provides motor assistance as you pedal. Adjust the PAS level on the display to control the amount of assistance you receive. Higher levels provide more power, while lower levels conserve battery life.
Throttle Operation
The throttle allows you to engage the motor without pedaling. Twist the throttle grip to accelerate. Use the throttle responsibly and be aware of your surroundings.
Braking
The dual disc brakes provide effective stopping power. Apply both front and rear brakes gently and evenly to slow down or stop. Avoid sudden, hard braking, especially at high speeds.
Lights
Activate the front and rear lights via the controls on the handlebars for improved visibility during low-light conditions or at night.
Maintenance
Regular maintenance ensures the longevity and safe operation of your electric bike.
- Tire Pressure: Check tire pressure before each ride. Maintain recommended PSI for optimal performance and safety.
- Brake Inspection: Regularly inspect brake pads and rotors for wear. Ensure brake levers are responsive and cables are not frayed.
- Chain Lubrication: Keep the chain clean and lubricated to ensure smooth gear changes and prevent wear.
- Battery Care: Store the battery in a cool, dry place. Charge it regularly, even if not in use, to maintain its health. Avoid fully discharging the battery.
- General Cleaning: Clean the bike regularly with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
- Fastener Checks: Periodically check all bolts, nuts, and quick releases for tightness.
Troubleshooting
This section addresses common issues you might encounter with your URLIFE E20 electric bike.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Battery not installed correctly, battery discharged, power button not pressed. | Ensure battery is fully inserted and locked. Charge the battery. Press and hold the power button firmly. |
| Motor not assisting | Low battery, PAS level set to zero, brake lever engaged, loose connection. | Check battery level and charge if necessary. Increase PAS level. Ensure brake levers are fully released. Check motor cable connections. |
| Brakes feel weak | Worn brake pads, loose brake cable, air in hydraulic system (if applicable). | Inspect and replace worn brake pads. Adjust brake cable tension. If issue persists, consult a professional bike mechanic. |
| Unusual noises during ride | Loose components, dry chain, rubbing brakes. | Check all fasteners. Lubricate the chain. Inspect brake calipers for rubbing. |
If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please contact URLIFE customer support.
Specifications
| Feature | Detail |
|---|---|
| Bike Type | Electric Bike |
| Model Name | E20 |
| Age Range | Adult |
| Brand | URLIFE |
| Number of Speeds | 7 |
| Wheel Size | 20 Inches |
| Wheel Width | 3 Inches |
| Frame Material | Carbon Steel |
| Suspension Type | Dual (Front Fork) |
| Special Features | Digital Display, Dual Disc Brake |
| Battery | 48V 13Ah (Removable, up to 80-mile range) |
| Motor Peak Power | 1000W |
| Max Speed | Up to 28 MPH (45 km/h) |
| Max Slope | 30° |
| Max Load Capacity | 265 pounds (120 kg) |
| Waterproof Rating | IP54 (Display) |
Warranty and Support
URLIFE provides a 1-year warranty for this product. For any questions, concerns, or warranty claims, please contact URLIFE customer support directly. We guarantee a response within 24 hours. When contacting support, please provide photos or videos to help us resolve your issues quickly and efficiently.
For further assistance, please visit the official URLIFE website or refer to the contact information provided with your purchase documentation.