1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your GOJOOASIS Rabbit Hutch Model YM-FDTL. This two-story wooden hutch is designed to provide a secure and comfortable environment for small animals such as rabbits and guinea pigs, suitable for both indoor and outdoor use.
Key features include:
- Spacious design for 2-3 rabbits.
- Constructed from durable fir wood.
- Equipped with 4 wheels for easy movement, two of which are lockable.
- Hinged doors for convenient access.
- Two removable bottom sliding trays for simplified cleaning.
- Heavy-duty galvanized wire fencing for ventilation and protection.
- Easy access ramp with timber ridges to prevent slipping.
Image: The GOJOOASIS Rabbit Hutch Model YM-FDTL positioned in a garden environment.
2. Safety Information
Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury to pets or damage to the product.
- Ensure all parts are securely fastened during assembly.
- Regularly inspect the hutch for any loose parts, damage, or wear.
- Place the hutch on a level, stable surface.
- When moving the hutch, ensure all locking wheels are disengaged. Engage locking wheels once the hutch is in its desired position.
- Keep small children away from the hutch during assembly and ensure they are supervised when interacting with pets near the hutch.
- This hutch is designed for small animals. Do not use it for animals larger than recommended.
3. Product Components
Before beginning assembly, verify that all components listed below are present and undamaged. Refer to the included hardware pack for fasteners.
- Wooden panels (various sizes for walls, roof, floor)
- Wire mesh panels
- Ramps with timber ridges
- Removable sliding trays
- Wheels (2 universal, 2 directional with locks)
- Hinges, latches, and other hardware
Image: Close-up of the hutch's non-slip ramps and universal wheels, highlighting their functionality.
Image: An aerial view of the hutch, illustrating the four access doors and the internal layout with sliding partitions.
4. Assembly Instructions
Assembly typically requires two adults and basic tools (e.g., screwdriver). Follow the numbered steps provided in the separate assembly diagram for detailed instructions. The general sequence is as follows:
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the component list to ensure everything is present.
- Assemble Base Frame: Connect the bottom wooden panels to form the base of the hutch. Attach the wheels to the designated points on the base, ensuring the locking wheels are positioned correctly.
- Install Side and Back Panels: Securely attach the side and back wooden panels to the base frame using the provided hardware.
- Construct Internal Structure: Install any internal dividers or floor panels that separate the different levels or sections of the hutch.
- Attach Ramps: Position and secure the ramps between the different levels or from the ground to the hutch entrance.
- Install Doors and Roof: Attach all access doors using hinges and secure them with latches. Install the roof panels, ensuring they are properly aligned and waterproofed if applicable.
- Insert Trays: Slide the removable cleaning trays into their designated slots at the bottom of the hutch compartments.
- Final Inspection: Check all screws and fasteners to ensure they are tight and secure. Verify that all doors open and close smoothly and that the hutch is stable.
5. Operating Instructions
Using your GOJOOASIS Rabbit Hutch is straightforward. Here are guidelines for daily use:
- Access Doors: The hutch features multiple hinged doors for easy access to different compartments. Use these doors for feeding, watering, and interacting with your pets. Ensure doors are securely latched when not in use to prevent escapes.
- Ramp Usage: The internal ramp allows pets to move between the raised housing area and the lower run. The timber ridges on the ramp provide traction to prevent slipping.
- Mobility: To move the hutch, unlock the two locking wheels. Carefully push or pull the hutch to its new location. Once positioned, engage the locking wheels to secure the hutch in place.
- Ventilation: The galvanized wire fencing provides essential ventilation. Ensure the hutch is placed in an area with adequate airflow, avoiding direct, prolonged exposure to harsh weather conditions.
Image: Two rabbits are shown near the hutch, demonstrating its use in an outdoor setting.
6. Maintenance and Cleaning
Regular cleaning and maintenance will extend the life of your hutch and ensure a healthy environment for your pets.
- Daily Cleaning: Remove any soiled bedding and waste daily.
- Tray Cleaning: The hutch is equipped with two removable bottom sliding trays. Pull out the trays, empty waste, clean with pet-safe disinfectant, rinse thoroughly, and dry before reinserting.
- Weekly Deep Clean: Once a week, perform a thorough cleaning of the entire hutch. This includes wiping down all surfaces, cleaning wire mesh, and replacing all bedding.
- Wood Care: The wooden components can be wiped clean with a damp cloth. Avoid excessive moisture. Periodically check for any signs of wear or damage to the wood and address them promptly.
- Weather Protection: If used outdoors, consider placing the hutch under a covered area or using a hutch cover during inclement weather to protect the wood from prolonged exposure to rain and sun.
Image: A detailed view of the removable mesh and sliding tray, illustrating the ease of cleaning the hutch's activity space.
7. Troubleshooting
If you encounter issues with your hutch, refer to the following common problems and solutions:
- Hutch is unstable: Ensure all assembly screws are tightened. Verify the hutch is on a flat, level surface.
- Wheels not locking: Check that the locking mechanism on the wheels is fully engaged. Ensure no debris is obstructing the wheel locks.
- Doors not closing properly: Inspect hinges for damage or misalignment. Ensure latches are correctly aligned and functioning.
- Ramp is slippery: The ramp is designed with timber ridges for traction. Ensure these ridges are clean and free of debris or excessive moisture.
- Difficulty sliding trays: Check for any obstructions in the tray runners. Ensure the trays are inserted correctly and are not warped.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | YM-FDTL |
| Overall Dimensions (L x W x H) | 40.56" x 23.03" x 36.61" |
| Material | Fir Wood, Galvanized Wire |
| Color | Grayish Blue |
| Number of Levels | 2 |
| Special Features | Wheels (2 locking), Removable Trays, Non-Slip Ramp, Multiple Access Doors |
| Target Species | Rabbit, Guinea Pig, Small Animals |
Image: Technical diagram illustrating the precise dimensions of the rabbit hutch.
9. Warranty and Customer Support
Warranty: This product comes with a manufacturer's warranty for 30 days from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, neglect, accidents, or unauthorized modifications.
Returns: For returns, please refer to the retailer's return policy, typically allowing returns within 30 days of purchase for a refund or replacement.
Customer Support: For assistance with assembly, missing parts, or any other inquiries, please contact GOJOOASIS customer support. You can visit the official GOJOOASIS store page for contact information: GOJOOASIS Store.