1. Introduction and Overview
Thank you for choosing the Tami Tami Queen Adjustable Bed Frame. This electric base is designed to enhance your comfort and well-being with its advanced features, including head and foot articulation, massage functions, and convenient wireless remote control. It is suitable for various users, including those seeking relief from back pain, individuals with limited mobility, pregnant women, and anyone desiring a customizable sleep experience.
Key features include:
- Ergonomic head (up to 65°) and foot (up to 45°) adjustments.
- Wireless remote with one-touch Zero Gravity and Anti-Snore presets.
- Customizable massage with 3 modes and intensities for upper or lower body.
- Built-in side pockets and dual USB charging ports.
- Soft under-bed LED lighting for safe navigation.
- Three adjustable leg heights (4″, 8″, 12″).
- High-strength steel frame supporting up to 850 lbs.
2. Safety Information
Please read all instructions carefully before assembly and use to ensure safe operation and prevent injury or damage.
General Safety
- Weight Capacity: The bed frame is designed to support a maximum weight of 850 lbs, including the mattress and occupants. Do not exceed this weight limit.
- Children and Pets: Keep children and pets away from the bed frame, especially during operation, to prevent injury from moving parts.
- Pinch Points: Be aware of potential pinch points when adjusting the bed frame. Keep hands and feet clear of moving mechanisms.
- Medical Devices: Individuals with pacemakers or other medical devices should consult their physician before using this product, as the massage motors may interfere with certain devices.
- Flammable Materials: Do not use or store flammable materials near the bed frame.
- Even Distribution: Ensure weight is evenly distributed on the bed frame. Avoid concentrating weight on the head or foot sections when elevated.
Electrical Safety
- Power Source: Connect the bed frame only to a properly grounded electrical outlet.
- Cord Management: Ensure the power cord is not pinched, kinked, or damaged. Keep it away from heat sources and sharp edges.
- Liquids: Do not expose the control box or remote control to liquids. Unplug the bed frame before cleaning.
- Maintenance: Do not attempt to open or service the control box or motors. Contact qualified personnel for repairs.
3. Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Adjustable Bed Frame Base (pre-assembled sections)
- Wireless Remote Control
- Power Cord and Adapter
- Adjustable Legs (multiple sections for height options)
- Mattress Retainer Bar
- User Manual (this document)
4. Setup and Assembly
Assembly typically requires two people. Follow these general steps:
- Unpack Components: Carefully remove all parts from the packaging. Place the bed frame sections on a clean, flat surface, preferably where the bed will be located.
- Connect Frame Sections: If the frame comes in multiple sections, connect them according to the instructions provided in the separate assembly guide. Ensure all bolts are securely tightened.
- Attach Legs: Determine your desired bed height (4″, 8″, or 12″). Screw the appropriate leg sections together and then attach them securely to the bed frame. Ensure all legs are tightened evenly for stability.
- Install Retainer Bar: Insert the mattress retainer bar into the designated slots at the foot of the bed frame. This prevents the mattress from sliding during adjustments.
- Connect Power: Plug the power cord into the control box on the bed frame, then plug the adapter into a grounded electrical outlet.
- Remote Pairing (if necessary): The remote control is usually pre-paired. If not, refer to the remote control section for pairing instructions.
- Place Mattress: Carefully place your mattress (up to 14″ thick) onto the adjustable bed frame.
Image: Adjustable leg heights for various needs, including 4-inch for seniors, 8-inch for pregnancy, and 12-inch for adults or storage.
5. Operating Instructions
Your Tami Tami adjustable bed frame is operated using the wireless remote control.
Wireless Remote Control Functions
The remote allows for precise control over the bed's movements and features.
Image: Wireless remote control with various function buttons and illustrations of bed positions (Zero Gravity, TV Setting, Reading Setting, Memory Positions).
- Head Up/Down: Adjusts the head section incline.
- Foot Up/Down: Adjusts the foot section incline.
- ZG (Zero Gravity): One-touch preset for the Zero Gravity position, which elevates the head and feet to promote circulation and reduce pressure on the lower back.
- TV Setting: One-touch preset for an optimal position for watching television or reading.
- FLAT: Returns the bed to a completely flat position.
- M1/M2 (Memory Positions): Save and recall your two favorite custom positions. To save a position, adjust the bed to your desired setting, then press and hold M1 or M2 until the bed beeps or flashes.
- Massage On/Off: Activates or deactivates the massage function.
- Massage Mode: Cycles through 3 different massage patterns.
- Massage Intensity: Adjusts the intensity level of the massage.
- Under-bed Light: Turns the soft LED lighting on or off.
- Lock Button: Locks the remote to prevent accidental adjustments.
Massage Function
The bed features a customizable massage system with 3 modes and intensities. You can focus the massage on either the upper body (head/back) or lower body (legs/feet) to target specific areas for relaxation and muscle relief.
Image: Illustration of the Zero Gravity massage feature, highlighting expert massage motors targeting various body points from head to foot.
Zero Gravity and Anti-Snore Presets
- Zero Gravity: This position elevates your head and feet to create a feeling of weightlessness, reducing pressure on your spine and improving circulation.
- Anti-Snore: Gently raises the head of the bed to open airways, which can help reduce snoring.
Additional Features
- USB Charging Ports: Utilize the dual USB ports located on the side of the bed frame to conveniently charge your electronic devices.
- Under-bed LED Lighting: Activate the soft LED light for ambient illumination, making it easier to navigate your room at night without disturbing others.
- Side Pockets: Store your remote, phone, or other small items in the integrated side pockets for easy access.
Image: Features designed to make life in bed easier, including four USB ports, quiet motors (<45dB), side pockets, and under-bed lighting.
6. Maintenance
Proper care and maintenance will extend the life of your adjustable bed frame.
- Cleaning: Unplug the bed frame before cleaning. Wipe the metal frame with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. Do not spray liquids directly onto the motors or electrical components.
- Motor Care: The motors are designed for maintenance-free operation. Do not attempt to lubricate or open them.
- Regular Checks: Periodically check all bolts and connections to ensure they are secure. Tighten if necessary.
- Power Cord: Inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support for a replacement.
7. Troubleshooting
If you encounter any issues with your adjustable bed frame, refer to the following troubleshooting guide. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed does not operate. | No power, loose connection, remote not paired. | Check if the power cord is securely plugged into the wall outlet and the control box. Ensure the outlet is functional. Check remote batteries. Re-pair the remote if necessary (refer to remote instructions). |
| Remote control not responding. | Dead batteries, remote out of range, remote locked. | Replace remote batteries. Ensure you are within range of the bed. Check if the remote's lock button is engaged. |
| Bed makes unusual noise. | Obstruction, loose hardware. | Check for any objects obstructing the moving parts of the bed. Ensure all bolts and connections are tight. The motors operate quietly (below 45dB), so loud noises indicate an issue. |
| Massage function not working. | Loose connection, motor issue. | Check all connections to the massage motors. If the issue persists, contact customer support. |
| Bed stops during operation. | Overload, thermal cut-off. | The control box has a thermal cut-off to prevent overheating. Unplug the bed for 30 minutes to reset. Ensure the weight limit is not exceeded. |
8. Specifications
| Model Number | TM2Q-Jia |
| Size | Queen (U.S. Standard) |
| Material | Metal |
| Product Dimensions (L x W x H) | 79.5" x 59.1" x 14.6" |
| Item Weight | 116 Pounds |
| Weight Capacity | 850 lbs (including mattress and occupants) |
| Head Incline | Up to 65° |
| Foot Incline | Up to 45° |
| Adjustable Leg Heights | 4", 8", 12" |
| Noise Level | <45dB (Quiet Motors) |
| UPC | 717405275857 |
9. Warranty and Support
For warranty information, please refer to the documentation included with your purchase or visit the official Tami Tami website. Warranty terms typically cover manufacturing defects and motor malfunctions for a specified period.
If you require assistance with assembly, operation, troubleshooting, or have any questions, please contact Tami Tami customer support. Contact details can usually be found on the manufacturer's website or on your purchase receipt.