OLEVS Automatic Watch Model 7091 Instruction Manual

Introduction

Thank you for choosing the OLEVS Automatic Watch Model 7091. This timepiece combines classic design with modern mechanical precision, offering a multi-functional experience. This manual provides essential information for the proper setup, operation, and maintenance of your watch to ensure its longevity and accurate performance.

Image: OLEVS Automatic Watch Model 7091, featuring a black dial with gold accents and a skeleton movement, worn on a wrist.

Product Features

• Skeleton Mechanical Movement: Features a double-sided skeleton design, allowing visibility of the intricate internal mechanism.
• Multi-Function Dials: Includes small dials for day, date, and a 24-hour moon phase display.
• Self-Winding Mechanism: Operates without a battery, powered by the natural motion of your wrist. Manual winding is also supported.
• Durable Construction: The strap is made of 316L stainless steel for strength and comfort.
• Water Resistance: Rated 30 meters (3ATM/98FT) for daily waterproofing, suitable for splashes and rain. Not suitable for hot water, sauna, diving, or swimming.
• Luminous Function: Hands and markers glow in the dark after exposure to light, improving readability in low-light conditions.

Setup and Time Setting

Your OLEVS Automatic Watch is designed for ease of use. Follow these steps to set up your watch:

Initial Winding

As an automatic self-winding watch, it gains power from your wrist's movement. For initial use or after a period of inactivity, manually wind the watch by rotating the crown clockwise approximately 30-40 times while it is in its normal, pushed-in position. This provides sufficient power reserve to start the movement.

Setting Time, Date, Day, and Year/Month

The watch features multiple adjustment points for its various functions. Refer to the diagram below for specific controls:

Image: Diagram showing the side view of the watch with labeled adjustment points for month, time, calendar, year, and week.

1. Adjusting Time: Pull the main crown (center right) out to the furthest position. Rotate it to set the hour and minute hands. Push the crown back in to start the watch.
2. Adjusting Month: Use the top right button to adjust the month.
3. Adjusting Calendar (Date): Use the bottom right button to adjust the date.
4. Adjusting Year: Use the left dark knob labeled (1) to adjust the year.
5. Adjusting Week (Day): Use the left dark knob labeled (2) to adjust the day of the week.

Important: Avoid adjusting the date or day between 9 PM and 3 AM, as this can damage the movement. If adjustment is needed during this period, first set the time outside this range, adjust the date/day, then reset the time.

Operating Your Watch

Once set, your OLEVS Automatic Watch operates continuously as long as it receives sufficient kinetic energy from your movement. The skeleton design allows you to observe the intricate workings of the mechanical movement.

Multi-Function Dials

• The dial at the 9 o'clock position indicates the day of the week.
• The dial at the 3 o'clock position indicates the date.
• The dial at the 12 o'clock position displays the year and month.
• The sub-dial at the 6 o'clock position is the skeleton flywheel, showcasing the watch's mechanical heart.

Maintenance

Water Resistance

Image: The OLEVS Automatic Watch Model 7091 partially submerged in water, demonstrating its 30M water resistance.

Your watch is designed with 30-meter (3ATM/98FT) water resistance. This means it is protected against splashes, rain, and brief immersion in water. However, it is not suitable for prolonged water activities such as swimming, diving, or showering with hot water. Exposure to hot water or steam can compromise the watch's seals.

Luminous Function

Image: The OLEVS Automatic Watch Model 7091 displaying its luminous hands and markers in a dark environment.

To activate the luminous function, expose the watch dial to a light source for at least 30 seconds. The luminous coating will absorb light and glow in the dark, making it easy to read the time day and night.

Band Adjustment

The stainless steel band can be adjusted to fit your wrist. If the band length is not suitable, links can be removed or added. It is recommended to remove an equal number of links from both sides of the clasp to maintain balance. For detailed instructions on how to remove and install metal wrist band links, please refer to the video below:

Image: The back of the OLEVS Automatic Watch Model 7091, highlighting the stainless steel bracelet and its push-button hidden clasp.

General Care

• Clean your watch regularly with a soft, dry cloth.
• Avoid exposing the watch to extreme temperatures or strong magnetic fields.
• Do not drop or subject the watch to severe impacts.

Troubleshooting

If your mechanical watch stops or loses time, consider the following:

• Insufficient Kinetic Energy: Automatic watches require consistent movement to maintain power. If the watch stops, it may be due to insufficient wrist movement. Manually wind the watch as described in the 'Initial Winding' section.
• Time Deviation: Mechanical watches may have slight time deviations. Regular winding and wearing can help maintain accuracy. If significant deviation occurs, consult a professional watch repair service.
• Water Damage: If the watch is exposed to water beyond its rated resistance, moisture may appear inside the crystal. Immediately take the watch to a professional for inspection and repair to prevent further damage.

Specifications

Image: Detailed product specifications for the OLEVS Automatic Watch Model 7091, including dimensions and materials.

Warranty and Support

OLEVS provides a 1-year product quality guarantee for this watch. If you encounter any issues during the use of your OLEVS Automatic Watch Model 7091, please contact the seller through Amazon for assistance. Ensure you retain your proof of purchase for warranty claims.