1. Introduction
The Fanttik Flip G10 Nano AutoCare is a cordless electric detailing brush designed for comprehensive vehicle cleaning. It features a dual-speed motor, adjustable head angles, and a variety of interchangeable brush heads to address different cleaning needs both inside and outside your car. This manual provides instructions for setup, operation, maintenance, and product specifications.
Image 1.1: The Fanttik Flip G10 Nano AutoCare electric detailing brush with its included accessories.
2. What's in the Box
Verify that all components are present in the package:
- Fanttik Flip G10 Nano AutoCare Main Unit
- PP Filament Brush
- Large Soft Brush
- Ulti-Soft Long Brush
- Horsehair Brush
- Nylon Dome Brush (Black)
- Nylon Dome Brush (Grey)
- Microfiber Towel Brush
- Nylon Crevice Brush
- Storage Bag
- USB-C Charging Cable (Note: Power adapter not included)
Image 2.1: All components included with the Fanttik Flip G10 Nano AutoCare.
3. Setup
3.1 Initial Charging
Before first use, fully charge the device. Connect the provided USB-C cable to the charging port on the device and to a compatible USB power adapter (not included). The LED screen will indicate the charging status and battery level. A full charge provides up to 230 minutes of runtime on low speed or 180 minutes on high speed.
3.2 Attaching Brush Heads
To attach a brush head, align the brush head with the rotating shaft on the main unit and push firmly until it clicks into place. To remove, pull the brush head directly off the shaft.
4. Operating Instructions
4.1 Power On/Off and Speed Adjustment
Press the power button to turn the device on. The device operates at two speeds: 350 RPM for deep cleaning and 250 RPM for delicate surfaces. Press the speed button to toggle between high (H) and low (L) speeds. The LED screen displays the current speed setting and battery percentage.
Image 4.1: The device operating at 350 RPM for effective cleaning.
4.2 Angle Adjustment (FlexGlide)
The device features a FlexGlide adjustment system, allowing the brush head to be set at 90°, 135°, or 180° angles. Press the angle adjustment button to cycle through the available angles. This feature helps reach tight spots and various surface contours.
- 180°: Ideal for broad, flat areas like engine bays.
- 135°: Suitable for angled surfaces such as dashboards.
- 90°: Perfect for deep corners, door frames, and seat gaps.
Image 4.2: Adjusting the brush head angle for versatile cleaning.
4.3 Brush Head Selection and Usage
The kit includes 8 replaceable BrisPro brush heads, each designed for specific cleaning tasks:
- PP Filament Brush: Flexible bristles for universal use in automotive interiors.
- Large Soft Brush: Recommended for steering wheels, AT change levers, and outer handles.
- Ulti-Soft Long Brush: Designed for vents, instrument clusters, and center panels.
- Horsehair Brush: Best for brake pedals, gas pedals, and engine compartments.
- Nylon Dome Brush (Grey): Suitable for automotive interiors, door trim panel spaces, cup holders, and center consoles.
- Nylon Dome Brush (Black): Ideal for automotive exteriors, wheel hubs, lug holes, and wheel rims.
- Microfiber Towel Brush: Use for rear view mirrors, vanity mirrors, and headlights.
- Nylon Crevice Brush: Perfect for door and body gaps, window gaps, and center console gaps.
Image 4.3: Examples of brush heads in use for interior detailing.
Image 4.4: Additional brush heads and their applications.
Image 4.5: Detailed view of brush heads and their recommended uses.
4.4 Product Demonstration Video
Video 4.6: An official demonstration of the Fanttik Flip G10 Nano AutoCare, showcasing its 8 brush heads and their versatility in cleaning various car corners.
5. Maintenance
5.1 Charging the Device
To charge the device, use the provided USB-C cable. The 2600mAh battery offers extended cleaning time. Monitor the battery level on the LED screen to ensure it is adequately charged before use.
Image 5.1: The device being charged via USB-C.
5.2 Cleaning and Care
The Fanttik Flip G10 Nano AutoCare is IPX7 waterproof, meaning it can be rinsed directly under a tap or submerged in up to 1 meter of water for 30 minutes. This allows for easy cleaning of the device after use. Ensure the charging port cover is securely closed before exposing the device to water. Avoid prolonged underwater submersion.
Clean brush heads after each use by rinsing them with water and allowing them to air dry. Store the device and brush heads in the provided storage bag to protect them from dust and damage.
Image 5.2: The device being cleaned under water, highlighting its IPX7 waterproof design.
6. Troubleshooting
If you encounter any issues with your Fanttik Flip G10 Nano AutoCare, please refer to the following general troubleshooting steps:
- Device not turning on: Ensure the device is fully charged. If the battery is low, connect it to a power source using the USB-C cable.
- Brush head not spinning: Check if the brush head is securely attached to the main unit. Ensure there are no obstructions preventing rotation.
- Reduced performance: Clean the brush heads thoroughly. A low battery can also affect performance; recharge the device if necessary.
- Water ingress: While the device is IPX7 rated, ensure the charging port cover is sealed properly before exposure to water. If water enters the device, discontinue use and allow it to dry completely.
For persistent issues not resolved by these steps, please contact Fanttik customer support.
7. Specifications
| Brand | Fanttik |
| Model Number | Flip G10 Nano AutoCare |
| Color | Black |
| Handle Material | Plastic |
| Product Dimensions (L x W x H) | 7.48" x 1.77" x 1.18" |
| Item Weight | 8.8 ounces |
| Material Type | Nylon, Plastic |
| Battery Capacity | 2600mAh |
| Run Time (Low Speed) | Up to 230 minutes |
| Run Time (High Speed) | Up to 180 minutes |
| Rotation Speed (High) | 350 RPM |
| Rotation Speed (Low) | 250 RPM |
| Waterproof Rating | IPX7 |
| UPC | 850077828317 |
8. Warranty and Support
Fanttik products come with a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Fanttik website. For technical support, replacement parts, or any other inquiries, please contact Fanttik customer service directly through their official channels.
You can find additional support and product information on the Fanttik store page: Fanttik Store
