Introduction
Thank you for choosing the Kappesberg Dining Set. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new dining set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The complete Kappesberg Dining Set, featuring a 1.6m rectangular table and six Luna chairs in cinnamon and grey colors.
Setup and Assembly
Your Kappesberg Dining Set is delivered disassembled and requires assembly. All necessary parts and an assembly guide are included. Please ensure you have adequate space and the appropriate tools before starting.
Required Tools (Not Included):
- Phillips head screwdriver
- Hammer (for dowels, if applicable)
- Allen wrench (if specific fasteners are used)
General Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the included assembly guide are present and undamaged.
- Identify Hardware: Separate and identify all screws, dowels, and other hardware according to the assembly guide.
- Assemble the Table: Follow the step-by-step instructions in the assembly guide to construct the table frame and attach the tabletop. Ensure all connections are secure.
- Assemble the Chairs: For each chair, attach the legs to the seat frame, then secure the backrest. The seat and backrest are padded and upholstered in velvet-type fabric. Ensure all fasteners are tightened.
- Final Inspection: Once assembled, gently test the stability of the table and chairs. Retighten any loose fasteners.
Image: The rectangular dining table, featuring a cinnamon-colored engineered wood top and legs.
Image: A single Luna chair, showing the cinnamon engineered wood frame and grey velvet-type upholstered seat and backrest.
Important: Assembly service is not included with this product. Always follow the specific diagrams and instructions provided in the separate assembly guide for detailed steps.
Operation and Use
The Kappesberg Dining Set is designed for indoor use in dining areas. It accommodates up to six people comfortably.
- Placement: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material damage or discoloration.
- Chair Usage: Each Luna chair is designed to support a maximum weight of 120 kg (approximately 265 lbs). Do not exceed this weight limit.
- Movement: When moving the table or chairs, lift them rather than dragging to prevent damage to the legs or floor.
- Backrest Handle: The detail on the back of the chair's backrest can be used as a handle for easier repositioning.
Care and Maintenance
Proper care will extend the life and appearance of your dining set.
Table and Chair Frames (Engineered Wood):
- Wipe surfaces regularly with a soft, damp cloth.
- For stubborn marks, use a mild, non-abrasive cleaner specifically designed for wood or engineered wood surfaces. Dry immediately with a clean cloth.
- Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Protect surfaces from hot items, spills, and sharp objects using placemats, coasters, or tablecloths.
Chair Upholstery (Velvet-type Fabric):
- Vacuum regularly with an upholstery attachment to remove dust and loose particles.
- For spills, blot immediately with a clean, dry cloth. Do not rub.
- For stains, use a fabric cleaner suitable for velvet-type materials, following the product instructions. Test on an inconspicuous area first.
- Avoid excessive moisture and direct sunlight, which can cause fading or damage to the fabric.
General Maintenance:
- Periodically check all fasteners (screws, bolts) and tighten them as needed to maintain stability and prevent wobbling.
- Do not stand on chairs or use them as step stools.
Troubleshooting
If you encounter any issues with your dining set, refer to the following common solutions:
- Wobbly Table or Chairs: This is often due to loose fasteners. Re-check all screws and bolts, and tighten them securely. Ensure the furniture is on a level surface.
- Scratches or Dents on Wood: Minor scratches can sometimes be minimized with wood repair markers or touch-up kits matching the cinnamon finish. For deeper damage, professional repair may be required.
- Stains on Fabric: Refer to the cleaning instructions in the Maintenance section. Act quickly to blot spills.
- Missing Parts During Assembly: If any parts were missing from the original packaging, contact Kappesberg customer support with your purchase details.
Product Specifications
| Attribute | Specification |
|---|---|
| Model Number | CSJ1864CN |
| Brand | Kappesberg |
| Color | Cinnamon/Grey |
| Material | Engineered Wood (MDF), Velvet-type Fabric |
| Table Dimensions (W x D x H) | 160 cm x 80 cm x 80 cm (63 in x 31.5 in x 31.5 in) |
| Chair Dimensions (W x D x H) | 42 cm x 54 cm x 93.5 cm (16.5 in x 21.3 in x 36.8 in) |
| Chair Seat Height | 50 cm (19.7 in) |
| Chair Weight Capacity | 120 kg (265 lbs) |
| Number of Items | 1 Table, 6 Chairs |
| Assembly Required | Yes |
Image: Diagram illustrating the dimensions of the dining table (160 cm width, 80 cm depth, 80.5 cm height) relative to a person.
Image: Diagram illustrating the dimensions of a Luna chair (42 cm width, 54 cm depth, 93.5 cm height) with a seat height of 48 cm, relative to a person.
Warranty Information
Specific warranty details for the Kappesberg Dining Set are typically provided at the point of purchase or included with the product packaging. Please refer to your purchase receipt or the documentation that came with your dining set for information regarding warranty coverage, terms, and conditions. In general, manufacturers offer a limited warranty against manufacturing defects.
Customer Support
If you have any questions regarding the assembly, operation, or maintenance of your Kappesberg Dining Set, or if you require assistance with missing or damaged parts, please contact Kappesberg customer support through their official website or the retailer from whom you purchased the product. Have your model number (CSJ1864CN) and purchase details ready when contacting support.
You can visit the Kappesberg brand store for more information: Kappesberg Store
