UGREEN MagFlow Pro 3-in-1 Qi2 25W Wireless Charger Instruction Manual

Introduction

Thank you for choosing the UGREEN MagFlow Pro 3-in-1 Qi2 25W Wireless Charger. This device is designed to provide efficient and simultaneous charging for your iPhone, Apple Watch, and AirPods. Featuring advanced Qi2 technology and an integrated TEC cooling system, it ensures fast, safe, and stable charging performance. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.

The UGREEN MagFlow Pro 3-in-1 Wireless Charger, showcasing its ability to charge multiple devices simultaneously.

Package Contents

• 1x UGREEN MagFlow Pro 3-in-1 Qi2 25W Wireless Charger
• 1x 45W USB-C Power Adapter
• 1x 1m USB-C to USB-C Cable
• 1x User Manual

Setup Instructions

1. Connect the Power Adapter: Insert the USB-C end of the provided cable into the charging port on the back of the UGREEN MagFlow Pro charger.
2. Plug into Power: Connect the 45W USB-C Power Adapter to a wall outlet. Ensure the connection is secure.
3. Placement: Place the charger on a stable, flat surface.
4. Initial Power-On: The charger's display will illuminate, indicating it is ready for use.

Note: For optimal performance and to achieve the full 25W charging speed, it is recommended to use the included 45W USB-C power adapter or another PD charger of 45W or higher.

Operating Instructions

Charging Your Devices

The UGREEN MagFlow Pro allows simultaneous charging of up to three devices:

• iPhone (MagSafe compatible): Place your iPhone on the magnetic charging pad. The magnetic alignment will ensure correct positioning for optimal charging.
• Apple Watch: Place your Apple Watch on the dedicated charging module.
• AirPods/Earbuds: Place your wireless charging compatible AirPods or other earbuds on the flat charging pad at the base.

The charger simultaneously powers an iPhone, Apple Watch, and AirPods.

Fast charging for Apple Watch, reaching 50% in approximately 19 minutes.

The wider anti-slip pad ensures stable charging for your earbuds.

TEC Cooling System

The charger features a Triple Cooling System combining a TEC semiconductor, a fan, and a magnetic glass surface to prevent overheating and ensure stable, long-lasting charging. The fan can be controlled manually.

The active CryoPulse TEC cooling system ensures efficient heat dissipation.

Thermal Guard technology monitors temperature for safe charging.

Display and Manual Control

The integrated display shows charging status and power output. Buttons allow control over the fan and display settings.

• Fan Control Button: Double-tap to turn the fan On/Off.
• Display Control Button:
  • Double-tap: Turn display On/Off.
  • Long press: Adjust display brightness.
  • Single tap: Cycle through display pages (Power screen, Temperature screen, Low input power icon).

The display provides real-time charging information, and buttons allow fan and display control.

Detailed instructions for controlling the fan and display settings.

Adjustable Multi-Angle Support

The charger features an adjustable design, allowing you to tilt the phone charging pad up to 90 degrees and rotate your device 360 degrees for optimal viewing angles during charging.

The multi-angle support allows for comfortable viewing while charging.

Maintenance

• Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the surface. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
• Cable Care: Do not bend or crimp the charging cable excessively.

Troubleshooting

Device not charging:

• Ensure the charger is properly connected to the 45W power adapter and a working wall outlet.
• Verify that your device is correctly placed on the charging pad and aligned with the magnetic area (for iPhone).
• Remove any thick phone cases or metallic objects that might interfere with wireless charging.
• Check if your device is compatible with wireless charging.

Slow charging speed:

• Ensure you are using the included 45W power adapter or a compatible PD charger of 45W or higher. Lower wattage adapters will result in slower charging.
• Confirm your device supports the higher charging speeds (e.g., iPhone 18 Pro/Max, 17, 16 with iOS 26 or later for 25W).
• Ensure proper alignment of your device on the charging pad.

Fan noise is too loud:

• The TEC cooling fan activates during fast charging to manage heat. If you prefer a quieter experience, double-tap the fan control button to turn it off. Note that turning off the fan may slightly reduce charging efficiency or speed during prolonged high-power charging.

Display is off or not responding:

• Double-tap the display control button to turn it on.
• Long press the display control button to adjust brightness.
• Ensure the charger is powered on.

Specifications

Detailed compatibility information for various devices and charging speeds.

Intelligent power distribution table for different devices and fan modes.

Safety Information

The UGREEN MagFlow Pro is equipped with multi-layer safety protections to ensure safe charging for your devices:

• Overcharge Protection
• Input Overvoltage Protection
• High Temperature Protection
• Short Circuit Protection
• Overcurrent Protection
• Static Electricity Protection
• Overpower Protection
• Foreign Object Detection (FOD)

Overview of the multi-layer safety features integrated into the charger.

Warranty & Support

This UGREEN product comes with a 2-year manufacturer's warranty.

For technical support, warranty claims, or any questions regarding your UGREEN MagFlow Pro 3-in-1 Wireless Charger, please contact UGREEN customer service through their official website or the retailer where you purchased the product. Please have your model number (75723) and proof of purchase ready.

You can find more information and contact details on the official UGREEN website: www.ugreen.com