1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Akko TAC75 HE 8K RGB Magnetic Gaming Keyboard. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Image 1.1: Akko TAC75 HE 8K RGB Magnetic Gaming Keyboard. This image displays the full keyboard from a top-down perspective, showcasing its 75% layout and RGB lighting.
2. Package Contents
Verify that all items are present in the package:
- Akko TAC75 HE 8K RGB Magnetic Gaming Keyboard
- USB Type-C Cable
- User Manual (this document)
- Keycap Puller (may vary by region)
- Switch Puller (may vary by region)
3. Setup
3.1 Connecting the Keyboard
- Unpack the keyboard and USB Type-C cable from the box.
- Connect the USB Type-C end of the cable to the port on the back of the keyboard.
- Connect the standard USB-A end of the cable to an available USB port on your computer.
- The keyboard will automatically be detected by your operating system.
Image 3.1: Keyboard with integrated cable routing channels. This image highlights the cable management grooves on the underside of the keyboard, allowing for organized cable placement.
3.2 Software Installation (Akko Driver)
For full customization and advanced features, download and install the Akko Driver software. The software allows you to configure key bindings, RGB lighting, actuation points, and other magnetic switch settings.
- Visit the official Akko website: https://web.akkogear.com/
- Navigate to the "Driver" or "Software" section.
- Download the appropriate driver for your operating system.
- Follow the on-screen instructions to complete the installation.
Image 3.2: Screenshot of the Akko Driver software interface. This image shows the web-based driver with options for configuration, remapping, magnetic switch settings, and advanced settings.
4. Operating Instructions
4.1 Basic Keyboard Functions
The Akko TAC75 HE functions as a standard 75% ANSI layout keyboard. All standard keys operate as expected. Function keys (F1-F12) are accessible via the Fn key combination.
4.2 Magnetic Switch Features
Your keyboard is equipped with advanced magnetic switches, offering features like adjustable actuation, Rapid Trigger, SOCD, and DKS.
4.2.1 Adjustable Actuation
The actuation distance of each key can be precisely adjusted in increments of 0.005mm using the Akko Driver software. This allows you to customize the key sensitivity to your preference, from light touches to deeper presses.
Image 4.1: Graphic illustrating 0.005mm adjustable actuation. This image shows a close-up of keyboard keys with a diagram indicating the precise 0.005mm actuation adjustment capability.
4.2.2 Rapid Trigger (RT)
Rapid Trigger allows keys to actuate and reset based on movement rather than a fixed point. This means a key can register a new press as soon as it begins to move upwards, and reset as soon as it begins to move downwards, enabling faster repeated inputs. Configure RT settings via the Akko Driver.
4.2.3 Dynamic Key Strokes (DKS) / Mod Tap
DKS, also known as Mod Tap, allows a single key to perform different actions based on how it is pressed. For example, a quick tap might register one key, while holding it down registers another. This feature can be configured through the Akko Driver software.
4.2.4 Simultaneous Opposing Cardinal Directions (SOCD)
SOCD cleaning is a feature primarily used in gaming to prevent conflicting directional inputs. For instance, if both 'left' and 'right' are pressed simultaneously, SOCD cleaning can prioritize one direction or cancel both, depending on the configured mode. This is configurable within the Akko Driver.
4.3 RGB Lighting Control
The Akko TAC75 HE features customizable RGB backlighting. Lighting effects, colors, and brightness can be adjusted using the Akko Driver software. Some basic lighting modes might be accessible via Fn key combinations (refer to the software for specific key combinations).
Image 4.3: Akko TAC75 HE keyboard displaying vibrant RGB lighting. This image showcases the keyboard's customizable backlighting across its keys.
4.4 High Performance Features
The keyboard boasts an 8000Hz polling rate and 16000Hz scan rate, minimizing input latency and ensuring rapid response times for competitive gaming.
Image 4.4: Graphic indicating 8K Polling Rate and 16K Universal Scan. This image highlights the high-performance specifications of the keyboard, emphasizing its low latency capabilities.
5. Maintenance
5.1 Cleaning the Keyboard
To maintain the keyboard's appearance and functionality:
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and case.
- For dust and debris between keycaps, use compressed air.
- Avoid using harsh chemicals, abrasives, or solvents.
5.2 Keycap Removal and Replacement
The keyboard features durable PBT Double-shot keycaps. If you need to remove or replace keycaps:
- Use a keycap puller to gently remove keycaps. Pull straight up to avoid damaging the switch stem.
- When replacing, align the keycap with the switch stem and press down gently until it clicks into place.
Image 5.1: Diagram showing Cherry Profile keycap heights. This image illustrates the varying heights of keycaps across different rows, characteristic of the Cherry profile.
6. Troubleshooting
6.1 Keyboard Not Responding
- Ensure the USB Type-C cable is securely connected to both the keyboard and the computer.
- Try connecting the keyboard to a different USB port on your computer.
- Test the keyboard on another computer to rule out system-specific issues.
- Restart your computer.
6.2 RGB Lighting Not Working
- Check the Akko Driver software to ensure RGB lighting is enabled and configured correctly.
- Ensure no conflicting software is running that might interfere with RGB control.
- Try resetting the keyboard to factory defaults via the Akko Driver software.
6.3 Software Not Detecting Keyboard
- Ensure the Akko Driver software is the latest version. Re-download from https://web.akkogear.com/ if necessary.
- Temporarily disable any antivirus or firewall software that might be blocking the driver.
- Ensure the keyboard is directly connected to the computer and not through a USB hub.
7. Specifications
| Feature | Detail |
|---|---|
| Model | Akko TAC75 HE |
| Switches | Akko Glare Linear Magnetic Switches |
| Actuation | Magnetic, Adjustable (0.005mm increments) |
| Layout | 75% ANSI |
| Polling Rate | 8000 Hz |
| Scan Rate | 16000 Hz |
| Connectivity | USB Type-C (Wired) |
| Keycaps | PBT Double-shot, Side-printed Shine-through |
| Lighting | RGB |
| Case Material | ABS Plastic |
| Cable Length | 1.5 m |
| Dimensions (approx.) | 330 x 76 x 135 mm |
| Weight (approx.) | 700 g |
| Compatible Devices | PC, Gaming Console |
| Special Features | Hall Effect, SOCD, Rapid Trigger, DKS Mod Tap, Adjustable Height |
8. Warranty and Support
8.1 Warranty Information
The Akko TAC75 HE 8K RGB Magnetic Gaming Keyboard comes with a 12-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
8.2 Customer Support
For technical assistance, warranty claims, or further inquiries, please contact Akko customer support through their official website:
You may also find FAQs and additional resources on their support pages.
