Giantex GX-13614WD-VJ

Giantex Swivel Bar Stools Instruction Manual

Model: GX-13614WD-VJ

Introduction

Thank you for choosing Giantex Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, maintenance, and care of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

Two assembled Giantex swivel bar stools with light-colored upholstered seats and wooden frames, positioned at a kitchen counter.

Image: Two assembled Giantex swivel bar stools in a kitchen setting.

Important Safety Information

  • Always follow the assembly instructions precisely. Incorrect assembly can lead to instability and injury.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
  • Do not stand on the bar stools. They are designed for seating only.
  • Do not exceed the maximum weight capacity of 350 lbs (158 kg) per stool.
  • Keep children away from the assembly area. Small parts may pose a choking hazard.
  • Use the stools on a flat, stable surface to prevent tipping.

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. Refer to the included paper instruction manual for a detailed list of components and hardware.

  • 2 x Bar Height Chairs (disassembled components)
  • 1 x Instruction Manual (paper copy)
  • Assembly Hardware (screws, bolts, washers, Allen wrench, etc.)

Assembly Instructions (Setup)

Assembly is required for these bar stools. Please follow the step-by-step instructions provided in the separate paper manual included in your package. Ensure you have adequate space and the necessary tools (usually an Allen wrench is provided).

  1. Unpack all components and hardware. Place them on a clean, soft surface to prevent scratches.
  2. Identify all parts using the component list in the paper manual.
  3. Attach the legs to the seat frame, ensuring proper alignment. Do not fully tighten screws until all components are loosely assembled.
  4. Install the footrest ring, aligning it with the pre-drilled holes in the legs.
  5. Secure the backrest to the seat frame.
  6. Once all parts are in place, gradually tighten all screws and bolts evenly. Do not overtighten.
  7. Place the assembled stool on a flat surface and check for stability. If wobbly, loosen screws slightly, adjust, and re-tighten.
Diagram showing the dimensions of the Giantex swivel bar stool, including height, width, depth, seat height, and footrest height.

Image: Dimensional diagram of the bar stool, indicating overall height (44"), seat height (30.5"), seat diameter (16.5"), footrest height (14"), and base dimensions (19.5"D x 17"W). Also shows a maximum load of 350 lbs and suitability for 40"-43" bar height.

Close-up of the Giantex bar stool highlighting its solid rubber wood frame construction and showing raw rubber wood logs.

Image: Detail of the solid rubber wood frame, emphasizing its high-strength and splinter-free properties.

Operation

Your Giantex Swivel Bar Stools are designed for comfort and functionality in various settings.

360° Swivel Seat

The seat features a smooth 360-degree swivel mechanism, allowing for easy rotation. This design enhances social interaction and provides effortless access to your surroundings without needing to move the entire stool.

Giantex bar stool illustrating its 360-degree swivel design with an arrow indicating rotation.

Image: Illustration of the 360-degree swivel seat, designed for easy interaction and socializing.

Ergonomic Support

The stools are equipped with an ergonomically curved backrest and a conveniently placed round footrest. These features promote proper posture and reduce leg fatigue, making the stools comfortable for extended periods of seating.

Giantex bar stool highlighting its ergonomic features: a curved backrest and a round footrest.

Image: Ergonomic design features, including the curved backrest for support and the round footrest for comfort.

Comfortable Cushioned Seat

The upholstered seat contains elastic sponge fillings and is covered with breathable polyester fabric, providing a soft and comfortable seating experience.

Top-down view of two Giantex bar stool seats, emphasizing the comfortable cushioned design with breathable polyester fabric and high-resilience sponge.

Image: Close-up of the comfortable cushioned seat, featuring breathable polyester fabric and high-resilience sponge.

Maintenance and Care

Proper care will extend the life and appearance of your bar stools.

Wood Frame Care

  • Wipe the wood frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
  • Dry immediately with a clean, soft cloth to prevent water spots.
  • Keep the stools away from direct sunlight and heat sources to prevent wood warping or fading.
  • Periodically check and tighten all hardware to ensure stability.

Upholstery Care

  • Vacuum the upholstered seat regularly to remove dust and debris.
  • For spills, blot immediately with a clean, dry cloth. Do not rub.
  • For stubborn stains, use a mild fabric cleaner according to the product instructions, testing on an inconspicuous area first.
  • Avoid saturating the fabric with water or cleaning solutions.

Troubleshooting

If you encounter any issues with your bar stools, refer to the following common problems and solutions:

  • Stool is wobbly: Ensure all assembly screws and bolts are fully and evenly tightened. If the issue persists, loosen all fasteners slightly, sit on the stool to settle the components, and then re-tighten all fasteners.
  • Swivel mechanism is stiff: The swivel mechanism is designed for smooth operation. If it feels stiff, ensure no debris is obstructing the mechanism. A small amount of silicone-based lubricant (avoid oil-based lubricants on wood) can be applied to the swivel plate if necessary, but typically this should not be required.
  • Parts are missing or damaged: Refer to the customer support section for assistance. Do not attempt to use the stool with missing or damaged parts.

Specifications

FeatureSpecification
Overall Dimensions (L x W x H)19.5" x 17" x 44"
Diameter of Seat16.5"
Seat Height30.5"
Footrest Height14"
Weight Capacity350 lbs
Net Weight of Each Chair17.5 lbs
ColorDriftwood + Sand
Frame MaterialRubber wood
Seat MaterialPolyester, Sponge
Suitable Table Height40"-43"
Model NumberGX-13614WD-VJ
Assembly RequiredYes

Warranty Information

Specific warranty details for the Giantex Swivel Bar Stools (Model GX-13614WD-VJ) are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact Giantex customer support directly.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Giantex customer support. You can typically find contact information on the packaging, the included paper manual, or by visiting the official Giantex website or their store page on the retailer's website.

For online support, visit the Giantex Store on Amazon.

Related Documents - GX-13614WD-VJ

Preview Giantex Table and 4 Chairs Set JV10330WH User Manual
User manual and assembly instructions for the Giantex JV10330WH Table and 4 Chairs Set. Includes parts list, assembly steps, and care instructions for dining furniture.
Preview GIANTEX HV10896 Swivel Accent Chair Assembly Instructions
Concise assembly instructions and safety information for the GIANTEX HV10896 Swivel Accent Chair, including parts list, hardware, and step-by-step guide.
Preview GIANTEX HV10905 Upholstered Sofa Chair Assembly and Safety Instructions
Assembly instructions, parts list, and safety information for the GIANTEX HV10905 Upholstered Sofa Chair. Includes guidance on returns and damage claims.
Preview Giantex Wood Twin Bed Assembly Instructions
Detailed assembly instructions for the Giantex Wood Twin Bed with 2 Storage Drawers, including a parts list, hardware list, and step-by-step diagrams with textual descriptions.
Preview GIANTEX JL10027 Massage Chair User Manual
This user manual for the GIANTEX JL10027 Massage Chair provides comprehensive instructions on safe operation, assembly, maintenance, and troubleshooting. Learn about product specifications, included components, and various massage modes to ensure optimal use and longevity of your massage chair. Important safety precautions are detailed to prevent electric shock, burns, and injury, making it an essential guide for household use.
Preview Giantex Armchair with Ottoman HV10669 - Assembly Instructions and Safety Information
Complete assembly instructions, parts list, safety guidelines, and return information for the Giantex Armchair with Ottoman, model HV10669. Includes English and French content.