Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Infanti WELLY Stroller Travel System. Please read this manual thoroughly before use and keep it for future reference. This travel system is designed for children from newborn up to 15 kg (approximately 0-3 years).
Image: The Infanti WELLY Stroller Travel System, showing both the stroller and the Group 0+ car seat. The stroller is convertible to a bassinet and features a compact fold. The car seat is suitable for newborns up to 13 kg.
Important Safety Warnings
- ALWAYS use the 5-point harness to secure your child in the stroller or car seat.
- NEVER leave your child unattended in the stroller or car seat.
- Ensure all locking mechanisms are engaged before placing a child in the stroller.
- Do not overload the storage basket; refer to specifications for maximum weight.
- Avoid placing hot liquids or heavy objects on the handle.
- This product is not suitable for running or skating.
- The car seat is designed for use in a vehicle and with the stroller. Always follow car seat installation instructions for vehicle use.
- Regularly inspect the product for loose parts, damaged components, or worn fabric. Discontinue use if any damage is found.
Setup & Assembly
Unfolding the Stroller Frame
- Place the folded stroller on a flat surface.
- Release the folding latch (if present, usually on the side of the frame).
- Lift the handlebar upwards until the frame locks into its open position. You should hear a click.
- Ensure all parts are securely locked before proceeding.
Wheel Attachment
- Attach the front wheels by pushing them into the designated slots until they click into place.
- Attach the rear wheels similarly. Pull on the wheels to ensure they are securely fastened.
Attaching the Seat Unit / Bassinet
- Align the seat unit or bassinet connectors with the slots on the stroller frame.
- Push down firmly until both sides click securely into place.
- Verify the seat/bassinet is firmly attached by gently pulling upwards.
Image: Comparison of the Infanti WELLY Stroller in its assembled state (106x61x81 cm) and its compact folded state (23x61x71 cm), illustrating its space-saving design.
Operating Instructions
Converting Seat to Bassinet
The WELLY stroller seat is designed to convert into a bassinet for newborns. To convert:
- Ensure the seat is fully reclined.
- Adjust the footrest to its highest position.
- Fasten any internal straps or zippers to form the bassinet shape.
- The bassinet can be positioned facing forward or backward on the frame.
Image: The Infanti WELLY Stroller demonstrating its adjustable recline feature and its ability to convert the seat into a comfortable bassinet for infants.
Adjusting the Recline
The seat offers multiple recline positions for your child's comfort. Locate the recline adjustment lever or strap, typically at the back of the seat. Squeeze the lever or adjust the strap to select the desired recline angle. Ensure the seat is securely locked in place before use.
Using the 5-Point Harness
To secure your child:
- Place your child in the seat.
- Bring the shoulder straps over your child's shoulders and the waist straps around their hips.
- Insert the two buckle prongs into the central buckle until they click.
- Adjust the straps for a snug fit, ensuring no more than two fingers can fit between the strap and your child's body.
Image: Key features of the Infanti WELLY Stroller, highlighting the 5-point safety harness, the foldable canopy for sun protection, the spacious accessory basket, and the included footmuff.
Attaching and Using the Group 0+ Car Seat
The included Group 0+ car seat can be used as an infant car seat or attached directly to the stroller frame.
- To attach to stroller: Remove the main stroller seat unit. Align the car seat's adapters with the stroller frame's attachment points. Push down until it clicks securely. Always ensure the car seat is facing the parent when attached to the stroller.
- For vehicle use: Refer to the separate car seat manual for detailed installation instructions in your vehicle. Always use the vehicle's seat belt system to secure the car seat base or the car seat itself, following the manufacturer's guidelines.
- The car seat is suitable for newborns up to 13 kg.
Image: The Infanti WELLY Group 0+ Car Seat shown separately and attached to the stroller frame, demonstrating its versatility as part of the travel system.
Folding the Stroller
To fold the stroller for storage or transport:
- Ensure the seat is in an upright position (if not in bassinet mode).
- Locate the folding mechanism, usually on the handlebar or side of the frame.
- Follow the specific steps to engage the folding mechanism, often involving pressing buttons and pushing the handlebar forward or downward.
- Once folded, secure the folding latch to keep it compact.
Maintenance
Cleaning
- Fabric parts: Spot clean with a damp cloth and mild soap. Air dry thoroughly. Do not machine wash or tumble dry unless specified on the care label.
- Frame and plastic parts: Wipe clean with a damp cloth. Do not use abrasive cleaners.
- Wheels: Periodically clean wheels and axles to remove dirt and debris. Lubricate moving parts with a silicone-based lubricant if necessary.
Storage
Store the stroller in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storing to prevent mold or mildew.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stroller does not fold or unfold smoothly. | Folding mechanism is jammed or not fully released/engaged. | Ensure all locking latches are released. Check for obstructions. Apply light lubricant to moving parts if needed. |
| Wheels squeak or are difficult to turn. | Dirt or debris in the wheel mechanism; lack of lubrication. | Clean wheels and axles. Apply a silicone-based lubricant to the moving parts of the wheels. |
| Seat unit or car seat not attaching securely. | Misalignment or obstructions in the attachment points. | Ensure correct alignment of connectors. Check for debris. Push firmly until a click is heard. |
| Harness straps are too tight or too loose. | Incorrect adjustment. | Refer to the "Using the 5-Point Harness" section for proper adjustment. |
Specifications
| Brand | Infanti |
| Model | WELLY |
| Color | Grey |
| Age Range (Stroller) | Newborn to 3 years (approx.) |
| Maximum Weight (Stroller) | 15 Kilograms |
| Age Range (Car Seat) | Newborn up to 13 Kilograms (Group 0+) |
| Harness Type | 5-point |
| Materials | Alloy steel (frame), Plastic, Polyester (fabric) |
| Assembled Dimensions (L x W x H) | 81 cm x 61 cm x 106 cm |
| Folded Dimensions (L x W x H) | 23 cm x 61 cm x 71 cm |
| Item Weight | 9.4 Kilograms |
| Included Components | Stroller, Group 0+ Car Seat, Basket, Foldable Canopy, Footmuff |
| Country of Origin | China |
Warranty & Support
Manufacturer's Warranty
This Infanti WELLY Stroller Travel System includes a manufacturer's warranty. For specific terms, duration, and conditions, please refer to the warranty card included with your product packaging or visit the official Infanti website. Extended warranty options may also be available from third-party providers.
Customer Support
For technical assistance, spare parts, or any questions regarding your Infanti WELLY Stroller Travel System, please contact Infanti customer support. Contact details can typically be found on the product packaging, the official Infanti website, or through your retailer.
Online Resources: Visit the Infanti Store on Amazon
Product Videos
No official product videos from the seller were available for embedding in this manual.
