KOMFOTTEU SE00479MN-LODE-KF

Download PDF
Contents

KOMFOTTEU Turntable Stand with Charging Station

Model: SE00479MN-LODE-KF

Introduction

Thank you for choosing the KOMFOTTEU Turntable Stand. This versatile furniture piece is designed to store your vinyl records and turntable, featuring an integrated charging station for your electronic devices. Its robust construction and thoughtful design aim to enhance your listening experience and home organization. This manual provides essential information for safe assembly, operation, and maintenance.

Assembled KOMFOTTEU Turntable Stand in a living room setting with a record player on top and vinyl records stored below.

Figure 1: Assembled Turntable Stand with a record player and vinyl records.

Safety Information

WARNING:

  • This product requires assembly.
  • Carefully follow all assembly instructions provided to prevent injury.
  • Exercise caution when handling metal legs during and after assembly.
  • Do not exceed the maximum load capacity of 50 kg for the top tray and 30 kg for the open shelf.
  • Ensure the anti-toppling kits are properly installed to prevent accidental tipping, especially in households with children or pets.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • 1 x KOMFOTTEU Turntable Stand with Charging Station
  • 1 x Instruction Manual
  • All necessary hardware for assembly (screws, connectors, tools if included)

Specifications

Brand KOMFOTTEU
Model Number SE00479MN-LODE-KF
Color Black
Material Engineered Wood, Metal
Overall Dimensions (L x W x H) 48 x 40 x 88 cm (18.9 x 15.7 x 34.6 inches)
Open Shelf Dimensions (L x W x H) 44.5 x 30 x 25.5 cm
Cabinet Compartment Dimensions (L x W x H) 10 x 30 x 33 cm (each)
Height from Floor to Partition 25 cm
Power Cord Length 150 cm
Top Tray Load Capacity 50 kg (110 lbs)
Open Shelf Load Capacity 30 kg (66 lbs)
Total Cabinet Load Capacity 40 kg (88 lbs)
Charging Station Output 2 x 250V/16A Outlets, 1 x USB Port, 1 x Type-C Port (15.5W)
Net Weight 16 kg (35.3 lbs)
Diagram showing the overall dimensions of the turntable stand: 48cm width, 40cm depth, 88cm height. Detailed measurements for shelves, compartments, and leg height are also shown.

Figure 2: Product Dimensions.

Assembly Instructions

Assembly is required for this product. Please follow the steps below carefully. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the package contents list to ensure everything is present.
  2. Attach Metal Legs: Secure the metal hairpin legs to the bottom panel of the stand using the provided screws. Ensure they are tightened firmly for stability.
  3. Assemble Main Frame: Connect the side panels, back panel, and internal shelves according to the diagram in your separate assembly guide. Use the appropriate hardware for each connection.
  4. Install Charging Station: Insert the integrated charging station into its designated slot on the top panel. Ensure it is flush and secure.
  5. Connect Power Cord: Route the power cord through the cable management hole at the back of the unit.
  6. Attach Anti-Toppling Kits: For safety, attach the anti-toppling kits to the back of the stand and secure them to a wall stud using appropriate wall anchors (not always included, check your hardware pack).
  7. Final Check: Ensure all screws are tightened and the stand is stable before placing any items on it.
Close-up images showing the sturdy metal legs, reinforced connections, non-slip pads, and dual anti-toppling kits for the turntable stand.

Figure 3: Key structural and safety features including metal legs and anti-toppling kits.

Operating Instructions

Using the Charging Station

The KOMFOTTEU Turntable Stand features a built-in charging station to conveniently power your devices.

  1. Plug In: Connect the stand's main power cord to a standard wall outlet.
  2. Power Devices:
    • For AC powered devices (e.g., turntable, amplifier), plug them into the 250V/16A outlets.
    • For USB-powered devices (e.g., smartphones, tablets), use the integrated USB-A or Type-C ports.
  3. Cable Management: Utilize the cable hole at the back of the stand to keep power cords organized and out of sight, maintaining a tidy appearance.
Close-up view of the built-in charging station with two power outlets, one USB-A port, and one USB-C port, along with a cable management hole.

Figure 4: Integrated Charging Station and Cable Hole.

Storing Vinyl Records and Equipment

The stand offers multiple storage options:

  • Top Surface: Ideal for placing your turntable or other audio equipment.
  • Open Shelf: Suitable for larger items, books, or decorative pieces.
  • Vertical Compartments: Specifically designed to store vinyl records upright, protecting them from damage and making them easily accessible.

Maintenance

To ensure the longevity and appearance of your turntable stand, follow these maintenance guidelines:

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
  • Dusting: Regularly dust the stand to prevent buildup, especially around the charging station.
  • Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
  • Avoid Moisture: Keep the stand away from excessive moisture and direct sunlight to prevent warping or fading.

Troubleshooting

If you encounter any issues with your KOMFOTTEU Turntable Stand, refer to the following common solutions:

Problem Possible Cause Solution
Stand is wobbly/unstable Loose screws; uneven floor; anti-toppling kit not installed. Check and tighten all screws. Move to an even surface. Install or re-secure anti-toppling kits.
Charging station not working Power cord not plugged in; wall outlet not active; device fault. Ensure the stand's power cord is securely plugged into a live wall outlet. Test the outlet with another device. Check if the device being charged is functioning correctly.
Difficulty assembling Incorrect part orientation; missing hardware. Refer to the detailed assembly guide. Ensure parts are oriented correctly. Contact customer support if hardware is missing.

Warranty and Support

KOMFOTTEU products are designed for quality and durability. For specific warranty information or technical support, please refer to the warranty card included with your purchase or visit the official KOMFOTTEU website. Our customer service team is available to assist you with any questions or concerns.

For further assistance, please contact:

© 2026 KOMFOTTEU. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.