VASAGLE UKDC188B01V1 Set of 4 Dining Chairs Instruction Manual

1. Introduction

Thank you for choosing the VASAGLE UKDC188B01V1 Set of 4 Dining Chairs. These chairs are designed to provide a modern and comfortable seating solution for your dining room or kitchen. Featuring a glacier-textured synthetic leather surface and a sturdy metal frame, they offer both style and durability. The ergonomic design with a 105° inclined backrest ensures comfortable support for extended periods.

Image 1.1: VASAGLE dining chairs in a modern dining setting.

2. Safety Information

WARNING:

• Do not use these chairs on very uneven surfaces, as this may compromise stability.
• The maximum static weight limit per chair is 265 lb (120 kg). Exceeding this limit may cause instability, damage to the chair, or personal injury.
• Keep all small parts and packaging materials away from children during assembly to prevent choking hazards.

3. Setup (Assembly)

The VASAGLE dining chairs are designed for quick and simple assembly. Each chair can be assembled in approximately 5 minutes by following these instructions.

3.1 Included Components

• 4 x Dining Chair (seat and backrest unit)
• 1 x Assembly Kit (includes screws, washers, and Allen key)
• 1 x Instructions Manual (this document)

3.2 Assembly Steps

1. Carefully unpack all components and verify against the included parts list.
2. Attach the chair legs to the underside of the seat unit using the provided screws and Allen key. Ensure all screws are tightened securely.
3. Verify that the legs are in the correct positions and the direction arrows (if present) point towards the front of the chair.

Image 3.1: Visual guide for the 2-step chair assembly.

Image 3.2: Assembly tips for correct leg positioning.

3.3 Assembly Video

4. Operating (Features & Usage)

4.1 Ergonomic Comfort

These chairs feature a 105° inclined backrest designed to provide ergonomic support, promoting a comfortable sitting posture ideal for prolonged use during meals or gatherings.

Image 4.1: Ergonomic design for comfortable seating.

4.2 Plush Support

The chairs are equipped with foam-padded backrests and seats, offering enhanced comfort. The seat padding is approximately 1.6 inches (4 cm) thick, and the back padding is 0.8 inches (2 cm) thick.

Image 4.2: Comparison of seat padding for plush support.

4.3 Sturdy Construction & Adjustable Feet

Each chair is built with a strong steel frame, capable of supporting up to 265 lb (120 kg). The adjustable feet ensure stability, even on slightly uneven floor surfaces, preventing wobbling.

Image 4.3: Chair dimensions and weight capacity.

Image 4.4: Adjustable feet for stability.

5. Maintenance

5.1 Cleaning the Synthetic Leather

The glacier-textured synthetic leather upholstery is water-resistant and easy to clean. For daily maintenance, simply wipe down the surface with a damp cloth. For spills, use a mild soap solution and a soft cloth, then wipe dry immediately.

Image 5.1: Glacier-textured synthetic leather for easy cleaning.

5.2 General Care

• Avoid using harsh chemicals or abrasive cleaners, as these can damage the synthetic leather.
• Periodically check and retighten all screws to ensure the chair remains stable.
• Keep chairs away from direct sunlight and heat sources to prevent material degradation.

6. Troubleshooting

6.1 Chair Wobbles

• Ensure all assembly screws are fully tightened.
• Adjust the leveling feet on the bottom of the chair legs to compensate for uneven floor surfaces.

6.2 Difficulty Assembling

• Review the assembly instructions carefully, paying close attention to the orientation of the chair legs (refer to Image 3.2).
• Ensure you are using the correct screws for each step as indicated in the assembly kit.

7. Specifications

8. Warranty and Support

For warranty information or customer support, please refer to the documentation included in your product packaging or visit the official VASAGLE website. You can also contact the seller directly through your purchase platform for assistance.

Official VASAGLE Store: VASAGLE by SONGMICS HOME