Rolanstar Full Over Full Metal Bunk Bed

1. Important Safety Information

Please read and understand all instructions before assembling and using this bunk bed. Failure to follow these instructions can result in serious injury.

• Do not use the top bunk without the safety guardrails properly installed.
• This product is not recommended for children under 6 years old for the upper bunk.
• Do not exceed the maximum weight recommendation of 270 pounds for the upper bed.
• Always follow the assembly instructions carefully to ensure stability and prevent collapse.
• Ensure all connections are tight before use and check periodically.
• Use only mattresses that comply with the recommended dimensions and thickness for each bunk.

The Rolanstar bunk bed meets SGS and ASTM F1427 international safety standards.

2. Product Specifications

Detailed dimensions of the bunk bed for planning your space.

3. Setup and Assembly

Assembly is required for this bunk bed. It is recommended to have at least two adults for assembly. Please ensure all parts are present before beginning.

3.1 Unpacking and Part Identification

• Carefully unpack all components from the packaging.
• Refer to the included parts list and hardware diagram to identify each piece.
• Ensure all hardware (screws, bolts, washers, etc.) is accounted for.

3.2 Assembly Steps

1. Begin by assembling the lower bed frame according to the detailed instructions provided in the package.
2. Attach the vertical support posts to the lower bed frame.
3. Assemble the upper bed frame, ensuring all slats are securely in place.
4. Carefully lift and secure the upper bed frame onto the vertical support posts.
5. Install the full-length guardrails on the upper bunk. Ensure they are firmly attached.
6. Attach the fixed ladder to the bunk bed. Verify that the bubble pads on the ladder rungs are correctly positioned for safety and comfort.
7. Install the USB and Type-C charging station into the designated slot.
8. Affix the LED light strip to the desired location, typically under the upper bunk or along the lower frame.
9. Ensure all bolts and screws are tightened securely. Do not overtighten.

Bubble pads on the ladder provide safety and comfort during ascent and descent.

Non-slip foot pads on the bed legs enhance stability and prevent sliding.

4. Operating Instructions

4.1 USB & Type-C Charging Station

The bunk bed includes a built-in charging station with 2 USB ports and 1 Type-C port. This allows for convenient charging of electronic devices.

• Connect the charging station's power cord to a standard wall outlet.
• Plug your devices into the available USB or Type-C ports.
• Ensure devices are compatible with the charging station's output (5V=3A MAX for Type-C, 5V=2.4A MAX for USB).

The charging station provides convenient power access for your devices.

4.2 LED Lights with Remote Control

The integrated RGB LED strip lights offer customizable illumination for your bunk bed area.

• Connect the LED light strip's power cord to a standard wall outlet.
• Use the provided remote control to turn the lights on/off, change colors (20 options), and select from 21 lighting modes.
• The remote also allows for brightness adjustment and timing functions.
• An accompanying app may be available for additional control options; refer to the LED light kit's specific instructions for details.

Control the LED lights with the included remote for various colors and modes.

The LED lighting system offers over 60,000 colors and various modes, controllable via remote or app.

5. Maintenance

Regular maintenance helps ensure the longevity and safety of your bunk bed.

• Cleaning: Wipe the metal frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Hardware Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Retighten as necessary to maintain structural integrity.
• Guardrail Inspection: Regularly check that the guardrails are securely attached and free from damage.
• Ladder Condition: Inspect the ladder for any signs of wear or damage, especially the bubble pads, and ensure it is firmly attached.
• Electrical Components: Ensure the charging station and LED light power cords are not pinched or damaged. Unplug if any damage is observed.

6. Troubleshooting

This section addresses common issues you might encounter with your bunk bed.

6.1 Bed Wobbles or Feels Unstable

• Check Connections: Ensure all bolts and screws are fully tightened. Loose connections are the most common cause of wobbling.
• Level Surface: Verify that the bed is placed on a flat, level surface. Uneven flooring can cause instability.
• Assembly Review: Re-check the assembly instructions to confirm all parts were installed correctly.

6.2 Charging Station Not Working

• Power Connection: Ensure the charging station's power cord is securely plugged into a functional wall outlet.
• Device Compatibility: Confirm that your device is compatible with the charging station's output specifications.
• Cable Check: Try using a different USB or Type-C cable to rule out a faulty cable.
• Overload: Avoid connecting too many high-power devices simultaneously, which could trip an internal safety mechanism.

6.3 LED Lights Not Functioning

• Power Connection: Ensure the LED light strip's power adapter is securely plugged into a functional wall outlet.
• Remote Battery: Check the battery in the remote control and replace if necessary.
• Remote Pairing: If the remote is unresponsive, refer to the LED light kit's specific instructions for re-pairing procedures.
• Strip Connection: Verify that the LED strip is properly connected to its controller and power source.

7. Warranty and Support

For any questions, concerns, or issues not covered in this manual, please contact Rolanstar Customer Support.

• Customer Support: Refer to the contact information provided with your purchase or visit the official Rolanstar website for support options.
• Warranty Information: Specific warranty details are typically included with your product packaging. Please retain your proof of purchase for warranty claims.