ESKUTE T300mini

ESKUTE Mini E-Trike Electric Bike T300mini User Manual

Model: T300mini

Brand: ESKUTE

1. Introduction

Thank you for choosing the ESKUTE Mini E-Trike Electric Bike T300mini. This electric tricycle is designed for young riders, offering a stable and enjoyable riding experience with its three-wheel design and fat tires. It features a 250W motor, a 25.2V 12Ah battery, and multiple riding modes to suit various skill levels. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your E-Trike.

Child riding a white ESKUTE Mini E-Trike with specifications like rider height, motor, battery, speed, and tire size displayed.

Image: A child riding the ESKUTE Mini E-Trike, highlighting key features such as rider height compatibility (3'7"-5'5"), 250W motor, 25.2V 12Ah battery, 12.5MPH safe speed, 75% pre-set assembly, and 16x3.0" tires.

2. Safety Information

Before operating the ESKUTE Mini E-Trike, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage.

  • Always wear a helmet and appropriate safety gear (e.g., knee pads, elbow pads) when riding.
  • Ensure all components are securely fastened and in good working order before each ride.
  • Do not exceed the maximum weight recommendation of 330 pounds.
  • Supervise young riders at all times.
  • Adhere to local traffic laws and regulations.
  • Avoid riding in adverse weather conditions or on uneven terrain.
  • Familiarize yourself with the brake system and practice emergency stops in a safe area.
Comparison image showing a child riding a stable 3-wheel ESKUTE Mini E-Trike versus an unstable 2-wheel bike, emphasizing stability for beginners.

Image: This image illustrates the enhanced stability of the 3-wheel ESKUTE Mini E-Trike compared to a traditional 2-wheel bicycle, making it suitable for beginners.

3. Package Contents

Upon unpacking, please verify that all items are present and undamaged:

  • ESKUTE Mini E-Trike (main unit)
  • Removable Battery
  • Battery Charger
  • Front Basket
  • Rear Basket
  • User Manual
  • Assembly Tools (if applicable)

4. Setup and Assembly

The ESKUTE Mini E-Trike comes approximately 75% pre-assembled. Basic assembly is required to ensure proper function and safety. Please follow the detailed instructions provided in the separate assembly guide or video (if available).

Key Assembly Steps:

  1. Unfolding the Frame: Carefully unfold the main frame until it locks into place. Ensure all quick-release levers are secured.
  2. Handlebar Installation: Attach and adjust the handlebars to a comfortable height, ensuring they are aligned with the front wheel.
  3. Seat Post Installation: Insert the seat post and adjust the seat height to fit the rider. Ensure the quick-release clamp is tightened securely.
  4. Basket Attachment: Securely attach the front and rear baskets using the provided hardware.
  5. Pedal Installation: Install the pedals, noting that they are typically marked 'L' for left and 'R' for right. Tighten firmly.
  6. Battery Insertion: Insert the fully charged battery into its compartment and ensure it is locked in place.
  7. Pre-Ride Check: Before the first ride, perform a thorough check of all bolts, nuts, brakes, and tire pressure.
A child standing next to a white ESKUTE Mini E-Trike, with detailed dimensions of the bike and an inset showing the folded dimensions.

Image: This image displays the dimensions of the ESKUTE Mini E-Trike, including rider height compatibility (3'9"-4'9"), max load (330 lbs), bike net weight (63.9 lbs), and folded dimensions for storage or transport.

5. Operating Instructions

The ESKUTE Mini E-Trike offers multiple riding modes and safety features for an adaptable experience.

Riding Modes:

  • Pedal Mode: Ride the trike like a traditional bicycle using pedal power only.
  • Pedal-Assist Mode: The motor provides assistance as you pedal, making riding easier, especially on inclines.
  • Throttle Mode: Engage the throttle for motor power without pedaling.

Speed Modes (Pedal-Assist System - PAS):

The E-Trike features three low-speed modes to ensure a safe start for beginners and allow for progression as skill develops.

Three images showing children riding ESKUTE Mini E-Trikes with adults, illustrating three different speed modes: PAS 1 (Up to 6 MPH for ages 5-7), PAS 2 (Up to 9 MPH for ages 7-10), and PAS 3 (Up to 12.5 MPH for ages 10-13).

Image: This graphic details the three low-speed modes (PAS 1, PAS 2, PAS 3) with corresponding maximum speeds (6 MPH, 9 MPH, 12.5 MPH) and recommended age/height ranges for riders.

Brakes and Lighting:

The E-Trike is equipped with reliable disc brakes and integrated lighting for safety.

  • Dual Disc Brakes: Operate both front and rear brakes smoothly for controlled stopping.
  • Headlight: Provides illumination for visibility in low-light conditions.
  • Rearlight: Enhances visibility from behind.
A child riding an ESKUTE Mini E-Trike, with insets highlighting the headlights and taillights for safety.

Image: This image shows a child riding the E-Trike, with close-ups of the integrated headlights and rearlights, emphasizing the safety features.

6. Battery Information

The ESKUTE Mini E-Trike is powered by a removable 25.2V 12Ah (302.4Wh) lithium battery, designed for reliable performance and safety.

Battery Features:

  • Capacity: 25.2V 12Ah (302.4Wh). Note: Some models may feature a 25.2V 15Ah battery for extended range.
  • Certification: TUV-UL2849 certified for safety.
  • BMS: Integrated Battery Management System for intelligent safety.
  • Protection: Features over-charge protection.
  • Waterproof: IPX4 rated for splash resistance.
  • Range: Up to 42 miles on a single charge (actual range may vary based on terrain, rider weight, and assist level).

Charging Instructions:

  1. Turn off the E-Trike and remove the battery.
  2. Connect the charger to the battery charging port.
  3. Plug the charger into a standard wall outlet.
  4. The charger indicator light will show charging status (typically red for charging, green for fully charged).
  5. Once fully charged, disconnect the charger from the outlet, then from the battery.
  6. Always charge in a well-ventilated area and avoid charging overnight.
Close-up image of the ESKUTE Mini E-Trike's battery, highlighting its TUV-UL2849 certification, 25.2V 15Ah capacity, BMS, IPX4 waterproof rating, over-charge protection, and 42-mile max range.

Image: A detailed view of the E-Trike's battery, emphasizing its safety certifications and technical specifications.

7. Motor Information

The ESKUTE Mini E-Trike is equipped with a 250W brushless motor, capable of a peak output of 500W, providing smooth and efficient power assistance.

Motor Specifications:

  • Rated Power: 250W
  • Peak Power: 500W
  • Maximum Speed: 12.5 MPH
  • Max Torque: 60 Nm
  • Climbing Capability: Up to 35° incline
Diagram illustrating the internal components of the 250W brushless motor, with specifications like 500W peak motor, 12.5 MPH+ safe speed, 60NM max torque, and 35° climbing ability.

Image: An exploded view diagram of the brushless motor, detailing its power and performance characteristics.

8. Maintenance

Regular maintenance ensures the longevity and safe operation of your ESKUTE Mini E-Trike.

Routine Checks:

  • Tires: Check tire pressure before each ride. Recommended pressure is typically found on the tire sidewall. Inspect for wear and damage.
  • Brakes: Test brake levers for proper function and responsiveness. Ensure brake pads are not excessively worn.
  • Fasteners: Periodically check all bolts, nuts, and quick-release levers for tightness.
  • Chain: Keep the chain clean and lubricated.
  • Battery: Store the battery in a cool, dry place and charge it regularly, even if not in use, to maintain its health. Avoid fully discharging the battery.
  • Cleaning: Clean the E-Trike with a damp cloth. Avoid using high-pressure water jets directly on electrical components.

9. Troubleshooting

This section addresses common issues you might encounter with your ESKUTE Mini E-Trike.

ProblemPossible CauseSolution
E-Trike does not power onBattery not charged or not properly inserted; Power cable loose; Power button not pressed correctly.Ensure battery is fully charged and securely inserted. Check all cable connections. Press and hold the power button.
Motor not assistingBattery low; PAS level set to 0; Brake levers engaged; Motor cable loose.Charge battery. Increase PAS level. Ensure brake levers are fully released. Check motor cable connection.
Brakes feel weakBrake pads worn; Brake cable loose; Disc rotor dirty.Inspect and replace brake pads if necessary. Adjust brake cable tension. Clean disc rotor with appropriate cleaner.
Unusual noises during rideLoose components; Dry chain; Tire rubbing.Check all fasteners. Lubricate chain. Inspect tires for rubbing against frame or fenders.

If you encounter issues not listed here or require further assistance, please contact customer support.

10. Specifications

FeatureSpecification
Model NumberT300mini
Bike TypeElectric Trike
Age Range (Description)Little Kid (Age 6+)
Rider Height3'9''-4'9'' (Adjustable)
Maximum Weight Recommendation330 Pounds
Bike Net Weight63.9 lbs
Motor250W (Peak 500W) Brushless Motor
Max Speed12.5 MPH
Battery25.2V 12Ah (302.4Wh) Lithium-ion, Removable, TUV-UL2849 Certified
Max RangeUp to 42 Miles
Wheel Size16 Inches
Tire Size16 x 3.0 Inches Fat Tire
Frame MaterialCarbon Steel
Brake StyleDisc Brakes (Dual)
Suspension TypeRigid
Special FeaturesAdjustable Handlebars, Basket (Front & Rear), Digital Display, Fenders, Foldable
Assembly RequiredYes (75% Pre-set)

11. Warranty

The ESKUTE Mini E-Trike T300mini comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

12. Customer Support

For any questions, assistance, or support regarding your ESKUTE Mini E-Trike, please contact our dedicated customer support team.

Image of a customer support representative wearing a headset, with contact information for ESKUTE support including phone numbers for pre-sales and after-sales, and an email address.

Image: A customer support representative ready to assist, with contact details for ESKUTE.

  • Pre-sales Support: 1-888-886-2818
  • After-sales Support: 1-240-332-0549
  • Email: support.us@eskute.com
  • Operating Hours: Monday - Friday, 9:00 AM - 6:00 PM EST

© 2026 ESKUTE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.