ONBRILL B2-197 63-inch Large Buffet Cabinet Instruction Manual

Introduction

Welcome to your new ONBRILL 63-inch Large Buffet Cabinet. This manual provides detailed instructions for the assembly, safe use, and maintenance of your cabinet. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This versatile cabinet, with its farmhouse design and grooved barn doors, offers ample storage and can be used in various settings, including the kitchen, living room, or dining area.

Safety Information

Anti-Tipping Device

Your ONBRILL cabinet is equipped with an anti-tipping device to enhance stability and prevent accidental tipping. It is crucial to install this device as instructed in the assembly section. Failure to install the anti-tipping device can result in serious injury.

General Safety Guidelines

• Ensure all parts are securely fastened before using the cabinet.
• Do not overload shelves or the cabinet top. The tabletop can support up to 250 pounds.
• Keep small parts and hardware away from children during assembly.
• Assemble and use the cabinet on a level, stable surface.
• Avoid climbing on or hanging from the cabinet doors or shelves.

Product Overview and Dimensions

The ONBRILL 63-inch Large Buffet Cabinet features a spacious design with four enclosed doors and one flip-up storage space. Its overall dimensions are 63"W x 15.5"D x 31.5"H.

Assembly Instructions

This cabinet requires assembly. All necessary tools, clear instructions, and labeled parts are included. For optimal assembly, it is recommended to have two people. Please watch the official installation video for a visual guide.

Official Installation Video

Step-by-Step Assembly Guide

1. Step 1: Attach cam bolts (A) to the designated holes on Panel 1 (bottom base).
2. Step 2: Attach cam bolts (A) to Panels 10 and 11 (front support rails).
3. Step 3: Connect Panels 3 and 4 (side panels) to Panels 10 and 11 using cam locks (B) and wood dowels (C).
4. Step 4: Attach cam bolts (A), screws (D), and support bar (H-1) to Panel 5 (left middle divider).
5. Step 5: Attach cam bolts (A), screws (D), and support bar (H-1) to Panel 6 (right middle divider).
6. Step 6: Connect Panels 5 and 6 to Panel 8 (middle shelf) using cam locks (B) and wood dowels (C).
7. Step 7: Attach Panels 3, 4, 5, 6, and 8 to Panel 1 (bottom base) using cam locks (B) and wood dowels (C).
8. Step 8: Slide the back panels (17, 18) into the grooves on the assembled frame.
9. Step 9: Attach screws (L) and wood dowels (C) to Panels 2 (top panel), 3, and 4.
10. Step 10: Attach cam bolts (A) to Panel 2 (top panel).
11. Step 11: Attach cam bolts (A) to Panels 14 and 15 (small side rails for the top frame).
12. Step 12: Attach cam bolts (A) to Panel 12 (long front rail for the top frame).
13. Step 13: Connect Panels 14, 15, and 16 (small back rail for the top frame) to Panel 12 using cam locks (B) and screws (L).
14. Step 14: Attach cam locks (B) to Panels 14, 15, and 16.
15. Step 15: Attach cam locks (B) and wood dowels (C) to connect the top frame (Panels 2, 12, 14, 15, 16) to the main cabinet body (Panels 3, 4).
16. Step 16: Rotate the top panel 180 degrees and secure it to the main cabinet body using cam bolts (M).
17. Step 17: Insert shelf pins (M) into the desired holes and place the adjustable shelves (7, 9) into position.
18. Step 18: Attach hinges (G), magnetic catches (E-1, E-2), and handles (H-2) to the cabinet doors (19, 20, 21, 22).
19. Step 19: Attach the assembled doors (19, 20, 21, 22) to the cabinet using screws (D). Adjust hinges for proper alignment.
20. Step 20: Secure the back panels with screws (J-2) and plastic clips (J-1).
21. Step 21: Attach the anti-tipping straps (K-1) to the top back of the cabinet using screws (K-4) and washers (K-5).
22. Step 22: Secure the anti-tipping straps to the wall using screws (K-2), wall anchors (K-3), and washers (K-5). This step is critical for safety.

Usage

The ONBRILL Buffet Cabinet is designed for versatile use in various rooms. It can function as a kitchen buffet table, coffee bar, living room cabinet, storage console, or entryway accent cabinet. The adjustable shelves allow for customized storage of tableware, kitchen appliances, decorative items, and more.

Maintenance

To maintain the appearance and longevity of your ONBRILL cabinet, regularly wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish. Promptly clean up spills to prevent staining. The scratch-resistant and easy-to-clean engineered wood surface ensures daily ease of maintenance.

Specifications

Troubleshooting

Loose Connections

If the cabinet feels wobbly after assembly, carefully check all screws, cam locks, and dowels to ensure they are tightened securely. Do not overtighten, as this can damage the wood. Re-tighten any loose connections.

Doors Not Aligning

If the cabinet doors are not aligning properly, adjust the hinges. Most hinges allow for minor adjustments in height, depth, and side-to-side positioning. Refer to the hinge adjustment section in the assembly video or consult a professional if needed.

Missing or Damaged Parts

If any parts were missing or damaged upon delivery, please contact ONBRILL customer service immediately. Provide your product model number (B2-197) and a clear description of the missing or damaged components for prompt assistance.

Warranty & Support

For detailed warranty information regarding your ONBRILL Buffet Cabinet, please refer to the documentation included with your purchase. If you require further assistance, have questions, or need to make a warranty claim, please contact ONBRILL customer support. Keep your purchase receipt as proof of purchase for all warranty-related inquiries.