Benass 13x25 Heavy Duty Portable Carport Canopy Instruction Manual

1. Introduction

Thank you for choosing the Benass 13x25 Heavy Duty Portable Carport Canopy. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new carport. Please read all instructions carefully before beginning assembly or use.

This large capacity carport, measuring 25'L x 13'W x 10.33'H, offers ample space for vehicles or can serve as a temporary storage solution. It features a robust 1.5" galvanized steel frame and a durable 170gms PE canopy top, designed for enhanced stability and longevity.

Image 1.1: Benass 13x25 Carport Canopy with indicated dimensions (25'L x 13'W x 10.33'H).

Image 1.2: The spacious interior of the carport, suitable for various vehicles like a boat.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or property damage.

• Always assemble the carport with at least two people.
• Ensure the carport is anchored securely to the ground using the provided sandbags, wind ropes, and binding straps.
• Do not assemble the carport in strong winds, heavy rain, or other severe weather conditions.
• Regularly inspect the frame and canopy for any signs of damage or wear. Replace damaged parts immediately.
• Clear snow accumulation from the canopy promptly to prevent structural collapse.
• Keep all flame and heat sources away from the canopy fabric.
• Do not hang heavy objects from the frame.

3. Setup Instructions

The Benass carport is designed for straightforward assembly. It is recommended to have at least two people for installation.

3.1 Unpacking and Component Identification

Carefully unpack all components and verify against the parts list in your packaging. Ensure all pieces are present and undamaged before proceeding.

Image 3.1: Included accessories such as wind ropes, binding straps, sandbags, sidewalls, solar light, and light strip.

3.2 Frame Assembly

Assemble the galvanized steel frame by connecting the numbered poles and connectors as indicated in the detailed assembly diagram. Ensure all connections are secure. The frame includes support bars for improved stability.

Image 3.2: Detail of the internal support bar structure, enhancing the carport's stability.

3.3 Canopy and Sidewall Installation

Once the frame is erected, drape the 170gms PE canopy top over the frame. Secure it using the provided ball bungees through the grommets. Attach the sidewalls, including the roll-up zipper door and mesh windows, to the frame. Ensure all zippers and fasteners are properly aligned and secured.

Image 3.3: The roll-up zipper door feature, allowing for easy access and ventilation.

3.4 Anchoring

Fill the four sandbags with sand or stones and attach them to the carport legs. Use the wind ropes and binding straps to further secure the carport to the ground, especially in windy conditions. This ensures maximum stability.

4. Operation

4.1 Roll-Up Doors and Windows

The carport features a roll-up zipper door at the front and four side mesh roll-up windows. To open, unzip the door/window and roll it upwards, securing it with the attached buckles or ties. This allows for air circulation and easy access. To close, unfasten the buckles/ties and zip down completely to protect contents from elements.

4.2 Solar Light and Light Strip

The included solar light and light strip can be installed to provide illumination inside and around the carport, enhancing visibility and safety during nighttime use.

Image 4.1: The carport illuminated at night, showcasing the solar light and light strip accessories.

5. Maintenance

• Canopy Cleaning: Clean the PE canopy top with mild soap and water. Avoid harsh chemicals or abrasive brushes that could damage the material. Rinse thoroughly and allow to air dry completely before storage.
• Frame Inspection: Periodically check all frame connections to ensure they remain tight and secure. Inspect the galvanized steel for any signs of rust or damage.
• Anchoring Check: Regularly verify that the sandbags, wind ropes, and binding straps are properly secured and in good condition. Re-tighten or replace as necessary.
• Snow Removal: In areas with snowfall, promptly remove snow from the canopy to prevent excessive weight accumulation, which can lead to structural damage.
• Storage: When not in use for extended periods, especially during severe weather seasons, disassemble the carport and store all components in a dry, protected area to prolong its lifespan.

6. Troubleshooting

6.1 Carport Instability

• Issue: Carport feels wobbly or unstable.
• Solution: Ensure all frame connections are fully engaged and tightened. Verify that all sandbags are filled and properly attached, and that wind ropes and binding straps are securely anchored to the ground.

6.2 Water Leakage

• Issue: Water is dripping through the canopy.
• Solution: Check the canopy for any tears or punctures. Ensure the canopy is stretched taut over the frame to prevent water pooling. The 3-layer PE tarp with coating is designed to be waterproof.

Image 6.1: The canopy material is designed for excellent waterproof performance and UV protection (level 80+).

6.3 Difficulty with Zippers

• Issue: Zippers on doors or windows are sticking.
• Solution: Clean the zipper teeth with a brush to remove any dirt or debris. Apply a silicone-based lubricant or zipper wax to the teeth to improve smooth operation.

7. Specifications

8. Warranty

Benass offers a one-year 100% satisfactory after-sales service. If you encounter any problems upon receiving the carport or during its use, please contact Benass customer service for assistance.

9. Customer Support

For further assistance, technical support, or inquiries regarding your Benass carport, please refer to the contact information provided in your product packaging or visit the official Benass website.