1. Introduction
Thank you for choosing the ILIFE W90 Pro Handheld Wet & Dry Vacuum Cleaner. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
The ILIFE W90 Pro is a versatile cordless wet and dry vacuum cleaner designed for efficient floor cleaning.
2. Product Components
The ILIFE W90 Pro package includes the following items:
- 1x W90 Pro Main Unit
- 1x Roller Brush (pre-installed)
- 1x Charging Base
- 1x Power Adapter
- 1x Cleaning Tool
- 2x Sponge Filter (one pre-installed, one spare)
- 1x User Manual (this document)
3. Setup
3.1 Assembly
- Attach the Handle: Insert the handle into the main unit until it clicks securely into place.
- Install Water Tanks: Ensure both the clean water tank (CWT) and dirty water tank (DWT) are correctly seated in their respective positions.
3.2 Charging
Before first use, fully charge the vacuum cleaner. Place the main unit onto the charging base and connect the power adapter to the base and a wall outlet. The LED display will indicate charging status.
The 3-in-1 dock provides convenient storage, charging, and self-cleaning functionality.
4. Operating Instructions
4.1 Filling the Clean Water Tank
- Remove the clean water tank from the main unit.
- Open the tank cap and fill with clean tap water. For enhanced cleaning, a small amount of non-foaming floor cleaning solution can be added (refer to solution instructions for dilution). Do not exceed the MAX fill line.
- Close the cap securely and re-install the tank.
The ILIFE W90 Pro features separate 600ml clean and 560ml dirty water tanks for continuous fresh water cleaning.
4.2 Powering On and Cleaning Modes
Press the power button to turn on the device. The W90 Pro operates in a combined vacuuming, mopping, and washing mode. It is designed to tackle both wet and dry messes on hard floors.
The vacuum cleaner provides 7000 Pa suction for effective wet and dry cleaning.
4.3 Water Control
To spray water onto the floor, press and hold the water spray button located on the handle. Release the button to stop spraying. This allows for precise control over the water output.
Use the one-touch water control button to spray water as needed during cleaning.
4.4 LED Display and Voice Notifications
The integrated LED display provides real-time information on battery level, water spray status, and maintenance alerts. The device also features smart voice notifications for low battery, full dirty water tank, or roller brush blockages.
The LED display provides clear visual indicators for operational status.
Voice notifications alert users to important operational and maintenance needs.
5. Maintenance
5.1 One-Click Self-Cleaning
After each use, place the vacuum cleaner on its charging base and press the self-cleaning button. The device will automatically rinse and clean the roller brush and internal tubes. After the cycle, empty the dirty water tank to prevent odors.
Initiate the self-cleaning cycle with a single press to maintain hygiene.
5.2 Emptying and Cleaning the Dirty Water Tank
Regularly empty and rinse the dirty water tank to prevent bacterial growth and odors. Remove the tank, open its lid, discard the dirty water, and rinse thoroughly with clean water. Allow it to air dry before re-installing.
The dirty water tank should be emptied and cleaned after each use.
5.3 Roller Brush and Filter Maintenance
Periodically remove the roller brush and sponge filters for manual cleaning. Use the provided cleaning tool to remove hair and debris from the roller brush. Rinse both the roller brush and filters under running water. Ensure they are completely dry before re-installing to prevent mold and odors.
The roller brush and filters are washable for thorough cleaning.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Does not turn on | Low battery; Not charged | Charge the device fully. Ensure power adapter is connected correctly. |
| Poor suction | Dirty water tank full; Filter clogged; Roller brush blocked | Empty dirty water tank. Clean or replace filters. Clear any blockages from the roller brush. |
| No water spray | Clean water tank empty; Spray nozzle clogged | Refill clean water tank. Clean the spray nozzle. |
| Unpleasant odor | Dirty water tank not emptied/cleaned; Roller brush dirty | Empty and thoroughly clean the dirty water tank. Perform self-cleaning or manually clean the roller brush. |
| Voice alerts | Indicates specific issue (e.g., low battery, full DWT, brush blockage) | Refer to the LED display and voice prompt for the specific issue and follow recommended action. |
7. Specifications
- Model: W90 Pro
- Brand: ILIFE
- Form Factor: Handheld
- Color: Gray
- Suction Power: 7000 Pa
- Clean Water Tank Capacity: 600 ml
- Dirty Water Tank Capacity: 560 ml
- Battery Life: Up to 30 minutes
- Noise Level: ≤68 Decibels
- Filter Type: HEPA Filter, Sponge Filter
- Product Dimensions: 116L x 28W x 23H Centimeters
- Item Weight: 4.3 Kilograms
- Power Source: Battery Powered
- Control Method: Touch
- Recommended Uses: Hard Floor Cleaning, Wet & Dry Mess Cleanup, Kitchen Spills & Oil Stains, Pet Hair Removal, Daily Home Mopping & Vacuuming, Deep Cleaning for Tiles, Marble & Wooden Floors, Quick Spill Cleanup, Cleaning High-Traffic Areas.
8. Warranty and Support
For product support, warranty information, or to book a product demonstration, please contact ILIFE customer service:
- Customer Service Hotline: 1800-274-5433
- Website: www.ilifecare.in
Contact ILIFE India for support and service inquiries.
