Jugbow DT-61CNBU

Jugbow DT-61CNBU Dog Training Collar User Manual

Model: DT-61CNBU | Brand: Jugbow

1. Introduction

The Jugbow DT-61CNBU Dog Training Collar is designed to assist in training dogs of various sizes, from small to large breeds (5-120 lbs, neck sizes 5-24.4 inches). It features a remote control with a range of up to 4200 feet and offers four distinct training modes: Beep, Vibration, Safe Shock, and Shock Boost. The receiver collar is IPX8 waterproof, making it suitable for use in diverse environments, including wet conditions. Both the remote and collar are rechargeable, ensuring consistent performance for daily training.

2. Safety Information

  • This training collar is recommended for dogs over 6 months old.
  • Always ensure the collar fits snugly but comfortably around your dog's neck. It should not be too tight or too loose.
  • Regularly check your dog's skin for any signs of irritation or discomfort from the contact points.
  • Utilize the security lock feature on the remote to prevent accidental activation of training modes.
  • Begin training with the lowest intensity levels and gradually increase only if necessary, observing your dog's response.
  • The receiver collar is IPX8 waterproof, but the remote control is not. Avoid exposing the remote to water.

3. Package Contents

  • 1 x Dog Training Collar (Receiver)
  • 1 x Remote Control
  • 1 x Adjustable Nylon Strap
  • 1 x 2-in-1 Charging Cable
  • 2 x Sets of Contact Points (short and long)
  • 2 x Sets of Silicone Conductive Caps
  • 1 x Test Light Tool
  • 1 x User Manual

4. Product Overview

Jugbow Dog Training Collar Remote and Receiver
Figure 1: Remote Control and Receiver Collar. The remote features a clear display and intuitive buttons for mode selection and intensity adjustment. The receiver is compact and designed for comfort.
Jugbow Dog Training Collar Components
Figure 2: Complete set of Jugbow Dog Training Collar components, including the remote, receiver, charging cable, and accessories.

4.1 Remote Control

  • Display Screen: Shows current mode, intensity level, battery status, and channel.
  • Mode Selection Button: Cycles through Beep, Vibration, and Shock modes.
  • Intensity Adjustment Dial: Rotates to increase or decrease the level of the selected mode.
  • Shock Boost Button: Provides an additional 10% power to the shock mode.
  • Security Lock: A slide switch on the side to prevent accidental button presses.
  • Channel Button: For switching between two paired receiver collars.

4.2 Receiver Collar

  • Power Button: Turns the receiver on/off.
  • Contact Points: Deliver static stimulation. Comes with short and long options.
  • Silicone Conductive Caps: Cover contact points for comfort and skin protection.
  • Charging Port: Magnetic charging interface.
  • Adjustable Strap: Durable nylon strap, adjustable for various neck sizes.

5. Setup

5.1 Charging the Devices

Before initial use, fully charge both the remote control and the receiver collar. Use the provided 2-in-1 USB charging cable. A full charge typically takes approximately 2 hours.

  • Connect the magnetic ends of the charging cable to the charging ports on the remote and receiver.
  • Plug the USB end into a compatible USB power adapter (not included) or a computer USB port.
  • The battery indicator on the remote and receiver will show charging status and turn solid when fully charged.
Long Lasting Battery Life and Charging
Figure 3: The collar and remote are designed for long-lasting battery life and quick 2-hour charging.

5.2 Attaching Contact Points and Silicone Caps

Select the appropriate contact points based on your dog's coat length:

  • Short Contact Points: For dogs with thin hair.
  • Long Contact Points: For dogs with thick coats.

Always place the silicone conductive caps over the metal contact points to ensure comfort and prevent skin irritation.

Removable Shock Prongs for different coat types
Figure 4: Choose between short and long contact points, and always use silicone caps for your dog's comfort.

5.3 Adjusting the Collar Fit

Proper fit is essential for the collar's effectiveness and your dog's comfort.

  • Place the receiver on the top of your dog's neck, with the contact points touching the skin.
  • Adjust the nylon strap so that it is snug, allowing two fingers to fit comfortably between the strap and your dog's neck.
  • The collar is adjustable for neck sizes between 5 and 24.4 inches.
Adjustable Collar Strap for various dog sizes
Figure 5: The adjustable collar strap ensures a comfortable and secure fit for dogs of different sizes.

5.4 Powering On/Off & Pairing

  • To Power On: Press and hold the power button on both the remote and receiver until the indicators light up.
  • To Power Off: Press and hold the power button on both devices until the indicators turn off.
  • Pairing: The devices are typically pre-paired. If re-pairing is needed, refer to the detailed instructions in the included User Manual.

6. Operating Instructions

6.1 Selecting Training Modes

The Jugbow training collar offers four modes to suit various training needs:

  • Beep Mode: Provides an audible tone (1-3 levels).
  • Vibration Mode: Delivers a tactile vibration (1-3 levels).
  • Safe Shock Mode: Provides static stimulation (0-16 levels).
  • Shock Boost: Increases the current shock level by 10% for immediate attention.
Four Effective Training Modes
Figure 6: The remote offers Beep, Vibration, Shock, and Boost Shock modes for effective training.

6.2 Adjusting Intensity Levels

To adjust the intensity level for Beep, Vibration, or Shock modes:

  1. Press the mode selection button on the remote to choose your desired mode.
  2. Rotate the top dial on the remote to increase or decrease the intensity level. The current level will be displayed on the screen.
Easy to Adjust Levels on Remote
Figure 7: Adjust training levels easily by pressing the top button to select a mode and rotating the dial.

6.3 Dual-Channel Control

The remote control features a 2-channel system, allowing one remote to control two separate receiver collars simultaneously. Use the channel button to switch between Dog 1 and Dog 2.

4200FT Remote Range with Dual Channel Control
Figure 8: The remote offers a 4200ft range and dual-channel control for training two dogs.

6.4 Remote Security Lock

To prevent accidental activation of training modes, utilize the security lock feature. Slide the lock switch on the side of the remote to engage or disengage the lock.

User-friendly and Safe Design with Security Lock
Figure 9: The remote includes a security lock to prevent unintended commands.

7. Maintenance

  • Cleaning: Regularly clean the receiver collar and contact points with a damp cloth to remove dirt and debris. Ensure the contact points are free of buildup to maintain proper function.
  • Battery Care: Recharge the devices when the battery indicator shows low power. Avoid fully depleting the battery frequently to prolong its lifespan.
  • Water Exposure: The receiver collar is IPX8 waterproof and can be submerged. However, the remote control is NOT waterproof and should be kept dry.
  • Storage: Store the collar and remote in a cool, dry place when not in use.
IPX8 Waterproof Receiver Collar
Figure 10: The receiver collar is IPX8 waterproof, allowing your dog to swim or play in the rain. Note: The remote is not waterproof.

8. Troubleshooting

ProblemPossible Solution
Collar not responding to remote.Ensure both devices are powered on and fully charged. Check if they are properly paired. Verify the remote is not in lock mode.
Stimulation is not effective.Adjust the collar for a snug fit. Ensure contact points are touching the dog's skin. Use longer contact points if your dog has thick fur. Increase the intensity level gradually.
Short remote range.Ensure there are no large obstacles between the remote and the collar. Check for interference from other electronic devices.
Battery drains quickly.Ensure devices are fully charged. Power off devices when not in use. Battery life can vary based on usage frequency.
Skin irritation on dog's neck.Remove the collar immediately. Clean the area and allow it to heal. Ensure silicone caps are used and the collar is not worn for extended periods (more than 8-12 hours). Consult a veterinarian if irritation persists.

9. Specifications

  • Model Name: DT-61CNBU
  • Item Weight: 9.9 ounces
  • Item Package Dimensions L x W x H: 6.97 x 4.92 x 2.32 inches
  • Remote Range: Up to 4200 feet
  • Training Modes: Beep (1-3 levels), Vibration (1-3 levels), Safe Shock (0-16 levels), Shock Boost (+10% power)
  • Waterproof Rating (Receiver): IPX8
  • Battery: 1 Nonstandard Battery (included)
  • Charging Time: Approximately 2 hours
  • Receiver Standby Time: Up to 35 days
  • Remote Standby Time: Up to 45 days
  • Target Audience: Dogs (Small, Medium, Large)
  • Recommended Dog Weight: 5-120 lbs
  • Recommended Neck Size: 5-24.4 inches
  • Material: Nylon
  • Closure Type: Buckle

10. Warranty

The Jugbow DT-61CNBU Dog Training Collar comes with a 1-year warranty. Please refer to the warranty card included in your package for detailed terms and conditions. For warranty claims or service, please contact customer support.

11. Support

For any questions, technical assistance, or support regarding your Jugbow DT-61CNBU Dog Training Collar, please contact our customer service team:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.