Important Safety Information
Please read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always wear eye protection and protective clothing when jump starting a battery.
- Do not operate the jump starter if it is damaged.
- Keep out of reach of children.
- Do not immerse the unit in water.
- Do not jump start a frozen battery.
- Ensure proper ventilation when operating.
- Connect the clamps in the correct order to avoid sparks.
- Do not short-circuit the clamps.
- Recharge the unit regularly, especially if stored for long periods.
Product Overview
The BSMOOM 7000A Jump Starter is a powerful, portable device designed to jump start vehicles with dead batteries and charge electronic devices. It features a robust 7000A peak current, compatibility with all gas and up to 10.0L diesel engines, and multiple safety protections.
Package Contents
- BSMOOM Car Jump Starter (1)
- Heavy-duty Jumper Cables (Smart Clamps) (1)
- USB-A to USB-C Charging Cable (1)
- User Manual (1)
- Air Nozzle (5)
- Pump Tube (1)
Device Layout
Figure 1: The BSMOOM 7000A Jump Starter unit with its smart jumper cables, ready for use. The display shows 100% charge.
- Power Button: Turns the unit on/off.
- LCD Display: Shows battery level, operational status, and charging indicators.
- LED Light Button: Activates and cycles through flashlight, SOS, and strobe modes.
- USB Output Ports: For charging external devices.
- Type-C Input/Output Port: For charging the jump starter and external devices.
- Jump Start Port: For connecting the smart jumper cables.
Setup and Initial Charging
Before first use, fully charge your BSMOOM Jump Starter. For optimal performance, ensure the power is above 50% before jump starting a vehicle.
Charging the Jump Starter
- Connect the provided USB-A to USB-C charging cable to the Type-C input port on the jump starter.
- Connect the other end of the cable to a USB wall adapter (not included) or a powered USB port.
- The LCD display will show the charging progress. The unit is fully charged when the display shows 100%.
- Disconnect the charging cable once fully charged.
Figure 2: The digital display screen clearly indicates the battery capacity percentage and operational status.
Operating Instructions
Jump Starting a Vehicle
Ensure the jump starter has at least 50% charge before attempting to jump start a vehicle.
- Prepare the Vehicle: Turn off the vehicle's ignition and all accessories (headlights, radio, etc.). Engage the parking brake.
- Connect Jumper Cables to Jump Starter: Insert the blue plug of the smart jumper cables into the jump start port on the BSMOOM unit. Ensure it is fully seated. The indicator light on the smart clamp should flash green.
- Connect Clamps to Car Battery:
- Connect the RED (+) clamp to the positive (+) terminal of the vehicle's dead battery.
- Connect the BLACK (-) clamp to the negative (-) terminal of the vehicle's dead battery.
The smart clamp indicator light should turn solid green, indicating a correct connection. If it flashes red or beeps, check the connections and battery status.
- Start the Vehicle: Once the smart clamp indicator is solid green, start your vehicle's engine.
- Remove Clamps: As soon as the vehicle starts, remove the jumper cables from the car battery first (BLACK then RED), then disconnect the blue plug from the jump starter.
If the vehicle does not start after the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.
Charging External Devices (Power Bank Function)
The BSMOOM Jump Starter can also function as a power bank to charge your electronic devices.
- Connect your device's USB charging cable to one of the USB output ports (USB QC3.0 or Type-C) on the jump starter.
- The jump starter will automatically begin charging your device. The LCD display will show "OUT" indicating power output.
- Disconnect your device once charging is complete.
Figure 3: The jump starter can charge two USB-C compatible devices simultaneously, acting as a portable power bank.
Using the LED Light
The integrated 400-lumen LED light offers three modes for various situations.
- Press the LED light button once to turn on the Flashlight mode.
- Press again for SOS mode (slow flashing).
- Press a third time for Strobe mode (fast flashing).
- Press a fourth time to turn off the light.
Maintenance
Proper maintenance ensures the longevity and reliability of your BSMOOM Jump Starter.
- Recharging: For long-term storage, recharge the device every 2-3 months to maintain its battery health and readiness.
- Cleaning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Inspect jumper cables for any damage before each use. Replace if frayed or damaged.
Troubleshooting
If you encounter issues with your BSMOOM Jump Starter, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start. | Jump starter battery too low. Incorrect clamp connection. Vehicle battery severely damaged. | Ensure jump starter is above 50% charge. Check clamp connections (RED to +, BLACK to -). Ensure smart clamp indicator is solid green. Consult a professional mechanic. |
| Smart clamp indicator flashes red or beeps. | Reverse polarity connection. Short circuit. Over-current/Over-voltage. | Disconnect clamps immediately and reconnect correctly. Ensure clamps are not touching each other or other metal parts. Check vehicle battery for issues. |
| Jump starter not charging. | Charging cable or adapter faulty. Port not properly connected. | Try a different USB-C cable and/or wall adapter. Ensure the USB-C cable is fully inserted into the jump starter's Type-C port. |
| External devices not charging. | Jump starter battery too low. Device cable faulty. Device not compatible. | Ensure jump starter has sufficient charge. Try a different charging cable for your device. Verify device compatibility with USB charging standards. |
Specifications
| Feature | Specification |
|---|---|
| Model | PH18 |
| Peak Output Current | 7000 Amps |
| Battery Capacity | 24800 Milliamp Hours |
| Battery Cell Composition | Lithium Polymer |
| Voltage | 12V |
| Engine Compatibility | All Gas, up to 10.0L Diesel |
| USB Output 1 | 5V/3A, 9V/2A, 12V/1.5A (Quick Charge) |
| USB Output 2 (Type-C) | 5V/3A, 9V/2A, 12V/1.5A (Quick Charge) |
| LED Light Output | 400 Lumens (Flashlight, SOS, Strobe) |
| Dimensions (D x W x H) | 10.63" x 2.36" x 8.66" |
Warranty and Support
The BSMOOM 7000A Jump Starter comes with a 2-YEAR WARRANTY from the date of purchase, covering manufacturing defects. Additionally, lifetime technical support is provided.
For warranty claims, technical assistance, or any questions regarding your product, please contact BSMOOM customer support through the retailer where the product was purchased or refer to the contact information provided on the product packaging or official website.
Please retain your proof of purchase for warranty validation.
