1. Introduction
Thank you for choosing the EZVALO UCL05B 16.5-inch Under Cabinet Light. This product is designed to provide efficient and convenient lighting for various indoor spaces, such as kitchens, closets, and workshops. Featuring a battery-powered LED design and simple push-button control, it offers ease of installation and use. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your device.
Image 1: Overview of the EZVALO UCL05B Under Cabinet Light. This image displays the sleek, rectangular design of the light fixture, highlighting its compact size suitable for under-cabinet placement.
2. Safety Instructions
- Indoor Use Only: This product is designed for indoor environments. Do not expose it to water, high humidity, or outdoor conditions.
- Avoid Extreme Temperatures: Do not operate or store the device in extremely hot or cold environments.
- Handle with Care: Do not drop, disassemble, or attempt to repair the light yourself. Refer all servicing to qualified personnel.
- Battery Safety: The device contains a rechargeable battery. Do not puncture, incinerate, or expose the battery to excessive heat. Use only the provided or a certified compatible charging cable.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
3. Package Contents
Please check the package for the following items:
- 1 x EZVALO UCL05B 16.5-inch Under Cabinet Light
- 1 x USB Charging Cable
- 2 x Magnetic Mounting Strips with Adhesive
- 1 x User Manual (this document)
4. Setup and Installation
The EZVALO UCL05B light offers a simple, tool-free installation using magnetic mounting strips.
- Prepare the Surface: Choose a clean, dry, and smooth surface under your cabinet or desired location. Ensure the surface is free from dust, grease, or moisture.
- Attach Magnetic Strips: Peel off the protective film from one side of the adhesive on the magnetic mounting strips. Firmly press the adhesive side onto the chosen installation surface. Apply pressure for at least 30 seconds to ensure strong adhesion.
- Mount the Light: The EZVALO UCL05B light has built-in magnets. Align the light with the installed magnetic strips on the cabinet surface. The light will magnetically attach to the strips. Adjust its position as needed.
Image 2: Illustration of attaching the adhesive magnetic strips to the underside of a cabinet. The image shows a hand pressing the strip firmly onto a clean surface.
Image 3: Depiction of the EZVALO UCL05B light being magnetically attached to the pre-installed strips. The light snaps into place, demonstrating the ease of mounting.
5. Operating Instructions
The EZVALO UCL05B light is controlled by a single push button located on the device.
Image 4: Close-up view of the push button on the EZVALO UCL05B light, indicating its location for user interaction.
- Power On/Off: Press the button once to turn the light ON. Press the button again to turn the light OFF.
- Brightness Adjustment: When the light is ON, press and hold the button to cycle through brightness levels (e.g., low, medium, high). Release the button at your desired brightness. The light will remember the last brightness setting.
- Charging: When the battery is low, the light may dim or flicker. Connect the provided USB charging cable to the charging port on the light and to a standard USB power adapter (not included). An indicator light will show charging status (e.g., red for charging, green for fully charged).
6. Maintenance
- Cleaning: To clean the light, gently wipe the surface with a soft, slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or immerse the device in water.
- Battery Care: For optimal battery life, recharge the light regularly, especially if it has not been used for an extended period. Avoid completely draining the battery frequently.
- Storage: If storing the light for a long time, ensure it is fully charged and store it in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light using the provided USB cable. |
| Light is dim or flickers. | Low battery level. | Recharge the light. |
| Light falls off the surface. | Improper installation of magnetic strips; surface not clean or smooth. | Ensure the installation surface is clean and dry. Reapply new adhesive magnetic strips if necessary, pressing firmly for sufficient adhesion. |
| Light does not respond to button presses. | Battery completely depleted; internal malfunction. | Charge the light for at least 30 minutes. If the issue persists, contact customer support. |
8. Specifications
- Brand: EZVALO
- Model: UCL05B
- Dimensions (L x W x H): 16.5" x 1.7" x 0.6" (41.9 cm x 4.3 cm x 1.5 cm)
- Light Source: LED
- Brightness: Up to 1000 Lumens
- Light Color: Cool White
- Power Source: Battery Powered
- Control Method: Push Button
- Material: Aluminum (body), Plastic (shade)
- Color: Crisp White
- Indoor/Outdoor Usage: Indoor Only
- Water Resistance Level: Not Water Resistant
9. Warranty and Support
EZVALO products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your EZVALO UCL05B Under Cabinet Light, please refer to the warranty card included with your purchase or visit the official EZVALO website for customer service contact details.
Please retain your proof of purchase for warranty claims.