MAXLANDER 20V 12'' Cordless Weed Wacker/Edger and Leaf Blower Combo Kit

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your MAXLANDER 20V 12'' Cordless Weed Wacker/Edger and Leaf Blower Combo Kit. Please read this manual thoroughly before using the product and retain it for future reference.

Image 1.1: The MAXLANDER 20V Cordless String Trimmer and Leaf Blower Combo Kit in operation.

2. Safety Information

General Safety Precautions:

• Always wear eye protection, gloves, and sturdy shoes when operating the tools.
• Keep bystanders and pets at a safe distance from the operating area.
• Do not operate the tools near flammable materials or in explosive atmospheres.
• Always unplug the power cord (charger) and remove the battery before performing any maintenance, cleaning, or repairs.
• Ensure the work area is clear of obstacles and debris.
• Do not expose the tools to rain or wet conditions.

3. Package Contents

Verify that all items listed below are included in your package:

• 1 x Leaf Blower Unit
• 1 x String Trimmer/Edger Unit
• 2 x 20V 2.0Ah Lithium-ion Batteries
• 1 x Quick Charger
• 8 x Replacement Spools
• 1 x Operation's Manual (this document)

Image 3.1: All components included in the MAXLANDER 20V Combo Kit.

4. Setup

4.1. Battery Charging

1. Connect the quick charger to a standard power outlet.
2. Slide a 20V 2.0Ah battery onto the charger until it clicks into place.
3. Allow the battery to charge fully. The charger indicator light will change when charging is complete.
4. Remove the battery from the charger once fully charged.

Image 4.1: MAXLANDER 20V batteries being charged.

4.2. String Trimmer/Edger Assembly

1. Attach the auxiliary handle to the trimmer shaft. Adjust its position for comfortable operation.
2. Secure the safety guard to the trimmer head. Ensure it is firmly attached to prevent debris from being thrown towards the user.
3. Insert a charged 20V battery into the battery slot on the trimmer handle until it locks.

Image 4.2: Labeled components of the MAXLANDER Leaf Blower and String Trimmer.

4.3. Leaf Blower Assembly

1. Attach the blower nozzle to the main blower unit. Ensure it is securely fastened.
2. Insert a charged 20V battery into the battery slot on the blower handle until it locks.

5. Operating Instructions

5.1. Using the String Trimmer/Edger

1. Starting: Press the safety lock-off button and then squeeze the trigger to start the trimmer.
2. Trimming: Hold the trimmer firmly with both hands. Keep the cutting head parallel to the ground and move it in a sweeping motion. The 12-inch cutting path allows for efficient trimming.
3. Edging: The trimmer easily converts to an edger. Rotate the head 90 degrees and use the pre-installed rubberized wheel to guide the tool along edges for clean lines.
4. Automatic Line Feed: The innovative push-button command feed spool system automatically extends the line by 0.5cm each time the start button is pressed.
5. Plant Protection: Utilize the protection ring to prevent damage to plants, landscape features, and lawn ornaments while trimming.

Image 5.1: The automatic line feed mechanism on the trimmer head.

Image 5.2: The trimmer's guard protection feature.

5.2. Using the Leaf Blower

1. Starting: Press the safety lock-off button and then squeeze the trigger to start the blower.
2. Speed Control: The blower features a 2-speed mode. Select the desired speed for the task. The maximum wind speed is 150 MPH.
3. Operation: Direct the nozzle towards leaves and debris, sweeping them into piles for easy collection.

Image 5.3: The MAXLANDER leaf blower in action, highlighting its low noise level.

Image 5.4: Control panel and adjustable features of the MAXLANDER tools.

6. Maintenance

6.1. Cleaning

• Always remove the battery before cleaning.
• Wipe down the exterior of the tools with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Clear any grass, dirt, or debris from the trimmer head, safety guard, and blower nozzle.

6.2. String Spool Replacement

• Ensure the battery is removed.
• Refer to the trimmer head for specific instructions on opening the spool housing.
• Remove the empty spool and insert a new MAXLANDER replacement spool.
• Thread the line through the designated opening and reassemble the spool housing.

6.3. Battery Care and Storage

• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not store batteries in a discharged state for extended periods. Charge them periodically.
• For long-term storage, remove batteries from the tools.

Image 6.1: Example of easy storage for MAXLANDER tools.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAXLANDER website. Keep your proof of purchase for any warranty claims.