TESSAN 13-in-1 Tower Power Strip User Manual

Introduction

Thank you for choosing the TESSAN 13-in-1 Tower Power Strip. This manual provides essential information for the safe and efficient use of your device. Please read these instructions carefully before use and retain them for future reference.

This power strip is designed to provide multiple power outlets and USB charging ports in a compact tower design, featuring surge protection and individual switches for enhanced control and safety.

Product Features

• 13-in-1 Connectivity: Features 8 Schuko outlets and 5 USB ports (3 USB-C, 2 USB-A) to power and charge multiple devices simultaneously.
• Individual Switches: Four independent switches allow you to control power to specific sections of the Schuko outlets, saving energy and preventing frequent plugging/unplugging.
• Surge Protection: Integrated surge protection safeguards your connected devices from voltage spikes.
• Compact Tower Design: Space-saving vertical design with a stable base and non-slip pads.
• 2-Meter Extension Cable: Provides flexibility in placement.
• USB Charging: 3 USB-C ports (up to 15W) and 2 USB-A ports (up to 12W) for various USB-powered devices.

Image: Overview of the TESSAN 13-in-1 Tower Power Strip, highlighting its 8 Schuko outlets, 3 USB-C ports, 2 USB-A ports, 3680W maximum power, and 2-meter cable length. A smartphone is shown charging via a USB-C port.

Safety Instructions

To ensure safe operation, please observe the following safety guidelines:

• Do not exceed the maximum load capacity of 3680W.
• Do not connect multiple power strips in series.
• Do not use in wet or damp environments.
• Keep out of reach of children.
• Do not disassemble or modify the device.
• Ensure plugs are fully inserted into the outlets.
• If the surge protection indicator light is off, the surge protection may no longer be active.

Setup

1. Unpack: Carefully remove the power strip from its packaging.
2. Placement: Place the power strip on a stable, flat surface. Ensure adequate ventilation around the unit. The compact tower design is suitable for various locations such as desks, workshops, or hotel rooms.
3. Connect to Wall Outlet: Plug the power strip's 2-meter extension cable into a grounded wall outlet.
4. Power On: Press the main power switch (if available, otherwise individual switches control sections). The surge protection indicator light should illuminate, indicating active protection.

Image: The TESSAN Tower Power Strip positioned on a side table, demonstrating its compact size and the reach of its 2-meter extension cable. Dimensions of 18 cm height and 11.5 cm width are indicated.

Operating Instructions

Using Schuko Outlets:

• Insert the plug of your device into one of the 8 Schuko outlets. The outlets are spaced 5.4 cm apart to accommodate most plugs.
• Individual Switches: The power strip features 4 individual switches, each controlling two Schuko outlets on one side of the tower. Press a switch to turn on or off the corresponding outlets. An indicator light on the switch will show its status.

Image: A detailed view of an individual power switch on the TESSAN Tower Power Strip, complete with an illuminated indicator. A crucial note clarifies that these switches manage only the Schuko outlets and not the USB ports.

Using USB Ports:

• Connect your USB-powered devices (smartphones, tablets, smartwatches, etc.) to the available USB-C (3 ports, up to 15W) or USB-A (2 ports, up to 12W) ports.
• The USB ports are always active when the power strip is plugged in and do not depend on the individual Schuko outlet switches.

Image: The TESSAN Tower Power Strip actively charging multiple devices via its 5 USB ports, including 3 USB-C and 2 USB-A. The image highlights the maximum power output for each USB type: 12W for USB-A and 15W for USB-C.

Surge Protection:

• The power strip includes an integrated surge protector. A dedicated indicator light (often green) will be illuminated when the surge protection is active and functioning correctly.
• If this light is off, the surge protection may have been compromised and the unit should be replaced to ensure continued protection for your devices.

Image: The TESSAN Tower Power Strip on a desk, visually emphasizing its surge protection feature with a glowing blue shield graphic. This illustrates the multi-protection capabilities for connected devices.

Maintenance

• Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the power strip in a cool, dry place away from direct sunlight and moisture.
• Inspection: Periodically inspect the power cord and the unit for any signs of damage. If damage is found, discontinue use and replace the unit.

Troubleshooting

Specifications

• Model: JA-EU02A
• Brand: TESSAN
• Total Outlets: 13 (8 Schuko, 5 USB)
• USB Ports: 3 x USB-C (up to 15W), 2 x USB-A (up to 12W)
• Individual Switches: 4 (controlling Schuko outlets)
• Special Feature: Surge Protection
• Max Power Rating: 3680W
• Cable Length: 2 meters
• Dimensions (L x W x H): 11.5 cm x 11.5 cm x 17.9 cm (approx.)
• Plug Type: Type F (Schuko)
• Color: Grey
• Manufacturer: Jiaan Electrical Appliance(Dongguan)Co.,LTD
• Country of Origin: China

Warranty and Support

TESSAN products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact TESSAN customer support.

If you encounter any issues or have questions regarding your TESSAN 13-in-1 Tower Power Strip, please contact our customer support team for assistance. Please have your model number (JA-EU02A) and purchase information ready.