Introduction
Thank you for choosing the Vidapool SPT200-LV 2HP In/Above Ground Pool Pump. This manual provides essential information for the safe installation, operation, and maintenance of your new pool pump. Please read these instructions thoroughly before use and retain them for future reference.
Important Safety Instructions
When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:
- Read and follow all instructions.
- DANGER: Risk of electrical shock. Connect only to a grounded receptacle protected by a ground-fault circuit interrupter (GFCI).
- Do not bury cord. Locate cord to minimize abuse from lawnmowers, hedge trimmers, and other equipment.
- To reduce the risk of electrical shock, do not use an extension cord to connect the unit to electrical supply; provide a properly located outlet.
- Do not remove the grounding prong from the plug.
- Ensure the pump is installed on a solid, level surface.
- Always disconnect power to the pump before servicing.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Product Specifications
| Brand | Vidapool |
| Model Number | SPT200-LV |
| Horsepower | 2 HP |
| Voltage | 115 Volts |
| Maximum Flow Rate | 8120 GPH (135 Gallons Per Minute) |
| Maximum Lifting Height | 60 Feet |
| Material | Cast Iron, Plastic |
| Inlet/Outlet Adapters | Two 1.25-inch and two 1.5-inch |
| Cord Length | 6-foot (UL tested) |
The pump is designed for both in-ground and above-ground pool applications, ensuring efficient water circulation.
Image: Detailed specifications of the Vidapool pool pump, including horsepower, maximum head, amperage, voltage, maximum flow rate (QMAX), discharge size, and a table showing output flow rate at various total heads.
Setup and Installation
The Vidapool pool pump is designed for straightforward installation. Follow these steps for proper setup:
- Placement: Position the pump on a solid, level surface near your pool. Ensure adequate ventilation and protection from direct weather exposure.
- Plumbing Connections: The pump includes two 1.25-inch and two 1.5-inch inlet and outlet adapters. Connect your pool's plumbing (compatible with 40 PVC pipe) to the pump's inlet and outlet ports. Ensure all connections are secure and watertight to prevent leaks.
- Electrical Connection: Plug the 6-foot UL-tested cord into a grounded 115V electrical outlet protected by a Ground-Fault Circuit Interrupter (GFCI). Do not use extension cords.
- Priming the Pump: Before first use, or after cleaning the filter basket, ensure the pump is primed. Fill the pump's filter basket housing with water until it reaches the inlet pipe level. Securely close the lid.
Image: Dimensional overview of the Vidapool pool pump, indicating its overall length (24 inches), height (11.8 inches), and the 1.5 or 2-inch inlet/outlet ports.
The pump is designed for easy installation without the need for complex wiring or external timers. Simply plug it in and set the program.
Operating Instructions
Initial Start-up
- After installation and priming, ensure all valves are open to allow water flow to and from the pool.
- Plug in the pump. The pump will typically start in its default operating mode.
Setting the Integrated Timer
The Vidapool pump features an integrated timer for automated operation. This allows you to set a daily run-time without external devices.
- Calculate Run Time: Determine the optimal pump run time based on your pool size and usage.
- Choose Start Time: Wait until the desired time you want the pump to begin its daily cycle.
- Set Running Hours: Press the clock button on the pump's control panel to select the desired running hours. Options typically range from 2 to 24 hours.
- Automatic Operation: Once set, the pump will automatically activate at the chosen time each day and run for the specified duration.
Image: The control panel of the Vidapool pool pump, illustrating the timer settings. It shows options for 2, 4, 6, 8, 10, 12, 14, 16, and 24 running hours, along with an ON/OFF switch and a clock button for setting the timer. A warning label states: "DO NOT OPERATE PUMP WHEN THE PIPING SYSTEM IS CLOSED".
Quiet Operation
The Vidapool pump is engineered for stable and quiet performance, minimizing operational noise during use.
Video: An official Vidapool video demonstrating the features and operation of the pool pump with timer. This video highlights the pump's functionality and design.
Maintenance
Regular maintenance ensures the longevity and efficient operation of your Vidapool pool pump.
Filter Basket Cleaning
- The pump features a large filter basket designed to collect debris, leaves, and coarse particles.
- Regularly inspect and clean the filter basket to prevent blockages and maintain optimal flow.
- To clean: Disconnect power to the pump. Open the filter basket lid, remove the basket, empty debris, and rinse thoroughly. Reinsert the basket and securely close the lid. Re-prime the pump if necessary.
Image: A visual representation of the Vidapool pool pump's extra-large filter basket, highlighting its capacity to capture various types of debris such as leaves, hair, branches, and grit.
Winterization
- In colder climates, it is essential to properly winterize your pool pump to prevent freeze damage.
- Drain all water from the pump and plumbing lines. Store the pump in a dry, protected area if possible.
Troubleshooting
If you encounter issues with your Vidapool pool pump, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power; tripped GFCI; motor overheating. | Check power connection and GFCI. Allow motor to cool if thermal overload protection activated. |
| Low water flow | Clogged filter basket; air leak in suction line; low water level in pool. | Clean filter basket. Check for and seal air leaks. Ensure adequate pool water level. |
| Pump is noisy | Air in system; cavitation; motor bearing wear. | Check for air leaks in suction line and ensure pump is properly primed. Ensure adequate water flow. If noise persists, contact support. |
| Water leak | Loose connections; cracked housing; worn O-rings. | Tighten all plumbing connections. Inspect housing for cracks. Replace worn O-rings. |
If the problem persists after attempting these solutions, please contact Vidapool customer support.
Warranty and Customer Support
This Vidapool In/Above Ground Pool Pump is backed by a two-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures customer peace of mind and satisfaction.
For warranty claims, technical assistance, or any questions regarding your product, please contact Vidapool customer service. Please have your model number (SPT200-LV) and purchase information ready when contacting support.
Contact information for support can typically be found on the product packaging or the official Vidapool website.