1. Introduction
The WeeFancy Magnetic Alloy Hand Warmers (Model WF701) provide portable and reusable warmth for various outdoor activities and daily use. This device features a 7000mAh battery, three adjustable temperature settings, and a magnetic design allowing for use as a single unit or two separate warmers. This manual provides instructions for safe and effective operation, maintenance, and troubleshooting.

Image: Two WeeFancy Magnetic Alloy Hand Warmers. These devices are designed to provide warmth and can be used individually or magnetically combined.
2. What's in the Box
- Rechargeable Hand Warmers x 2
- USB-A to USB-C charging cables x 2
- Silicone wrist ropes x 2
- User Manual
3. Product Features
3.1 Compact and Portable Design
The hand warmers are designed to fit comfortably in the palm of your hand, making them easy to carry in pockets or gloves. Each unit is lightweight and comes with a silicone wrist rope for secure attachment.

Image: A hand holding one WeeFancy hand warmer, demonstrating its compact and ergonomic design.
3.2 Magnetic Attachment
The two hand warmer units can be magnetically attached to form a single unit, providing 360-degree warmth. They can also be separated for individual use or to share warmth.

Image: Diagram illustrating the magnetic connection between the two hand warmer units.
4. Setup
4.1 Charging the Hand Warmers
- Connect the provided USB-A to USB-C charging cable to a power source (e.g., USB wall adapter, computer USB port).
- Insert the USB-C end of the cable into the charging port on the hand warmer.
- The battery indicator will show charging status. A full charge takes approximately 4 hours.
- Once fully charged, disconnect the charging cable.

Image: Illustration of the hand warmer's controls and 7000mAh battery capacity, relevant for charging and operation.
5. Operating Instructions
5.1 Controls Overview

Image: Detailed view of the Power Control and Heating Control buttons on the hand warmer.
- Power Control Button: Short press to display the remaining battery level. Press and hold for 5 seconds to switch between Celsius (°C) and Fahrenheit (°F) temperature units.
- Heating Control Button: Press and hold for 2 seconds to turn heating on or off. Short press to cycle through the three heat levels.
5.2 Adjusting Temperature Settings
The hand warmer offers three distinct heating levels:
- Low: Approximately 113°F (45°C)
- Medium: Approximately 114-122°F (45.5-50°C)
- High: Approximately 123-131°F (50.5-55°C)
Short press the Heating Control Button to cycle through these levels. The current temperature level will be indicated on the display.

Image: Visual representation of the three adjustable heating levels and their corresponding temperature ranges.
6. Safety Information
Your safety is paramount. The WeeFancy Hand Warmers are designed with multiple protection features and have passed rigorous certifications including CE and FCC.
- Do not expose the device to water or excessive moisture.
- Avoid extreme temperatures (both hot and cold) and direct sunlight.
- Do not attempt to disassemble, repair, or modify the device.
- Keep out of reach of children and pets.
- Use only the provided charging cables.
- If the device shows signs of damage or malfunction, discontinue use immediately.

Image: Visual confirmation of UL, CE, and FCC safety certifications.
7. Maintenance
7.1 Cleaning
- Ensure the device is turned off and disconnected from any power source before cleaning.
- Wipe the surface with a soft, dry, or slightly damp cloth.
- Do not use harsh chemicals, abrasive cleaners, or immerse the device in water.
7.2 Storage
- Store the hand warmers in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the device to approximately 50% every three months to prolong battery life.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Hand warmer not heating | Battery is low or depleted. Heating function is off. | Charge the hand warmer. Press and hold the Heating Control Button for 2 seconds to activate heating. |
| Hand warmer not charging | Charging cable is not properly connected. Faulty charging cable or power adapter. | Ensure the USB-C cable is securely connected to both the hand warmer and the power source. Try a different USB-C cable or power adapter. |
| Temperature display is incorrect | Incorrect temperature unit selected. | Press and hold the Power Control Button for 5 seconds to switch between Celsius and Fahrenheit. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | WeeFancy |
| Model Name | WF701 |
| Material | Aluminum, Plastic |
| Color | Midnight black |
| Battery Capacity | 7000 Milliamp Hours |
| Charging Time | 4 Hours |
| Upper Temperature Rating | 131 Degrees Fahrenheit (55°C) |
| Reusability | Rechargeable |
| Item Dimensions (LxWxH) | 3.7 x 1.99 x 0.97 inches |
| Item Weight | 0.3 Pounds (per unit) |
| UPC | 199874936987 |
10. Warranty and Support
10.1 Warranty Information
The WeeFancy Magnetic Alloy Hand Warmers come with a 6-month warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper storage.
10.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your WeeFancy product, please refer to the contact information provided with your purchase or visit the official WeeFancy website.