BioloMix 4-in-1 Immersion Hand Blender 1200W User Manual

Important Safety Instructions

Please read all instructions carefully before using your BioloMix Immersion Hand Blender. Keep this manual for future reference.

• Always unplug the appliance from the power supply before assembly, disassembly, or cleaning.
• Do not immerse the motor unit in water or any other liquid. Clean with a damp cloth only.
• Blades are sharp. Handle with extreme care when assembling, disassembling, and cleaning.
• Keep hands, hair, clothing, and utensils away from moving parts during operation to prevent injury.
• Do not use the appliance for purposes other than its intended use.
• This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities unless supervised.
• Do not operate the appliance if the cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any way.
• Avoid contact with hot food or liquids when blending. Allow hot ingredients to cool slightly before processing.
• Do not overload the chopping bowl. Refer to the maximum fill lines.

Product Overview

Components

Your BioloMix 4-in-1 Immersion Hand Blender comes with the following components:

• Motor Body (Main Unit)
• Immersion Blender Attachment
• 500ml Chopping Bowl with Blade and Lid
• 600ml Blending Beaker
• Whisk Attachment
• Milk Frother Attachment

Image: The complete BioloMix 4-in-1 Immersion Hand Blender set, showcasing the motor body, immersion blender shaft, chopping bowl, blending beaker, and whisk attachment.

Image: The BioloMix hand blender and its various accessories, including the chopper, whisk, and blending beaker, displayed on a kitchen counter.

Setup and Assembly

Attaching and Detaching Attachments

To attach an accessory (immersion blender shaft, whisk gear box, or chopper lid) to the motor body:

1. Align the motor body with the desired attachment.
2. Push the attachment onto the motor body and twist clockwise until it locks securely into place.

To detach an accessory:

1. Twist the attachment counter-clockwise and pull it away from the motor body.

Image: A close-up diagram illustrating the simple push-and-twist mechanism for attaching and detaching the blender shaft from the motor unit.

Operating Instructions

Speed Control and Turbo Mode

The BioloMix Hand Blender features 6 adjustable speed settings and a Turbo button for precise control over your blending tasks.

• Adjustable Speed Dial: Rotate the dial on top of the motor body to select speeds from 1 to 6. Start with lower speeds for softer ingredients or gentle mixing, and increase for tougher ingredients or faster processing.
• Power Button: Press and hold the power button to operate the blender at the selected speed. Release to stop.
• Turbo Button: For maximum power, press and hold the Turbo button. This will operate the blender at its highest speed regardless of the dial setting. Use for tough ingredients or when a quick burst of power is needed.

Image: A detailed view of the hand blender's control panel, highlighting the 6-speed adjustment dial and the separate power and turbo buttons.

Using the Immersion Blender

Ideal for blending soups, sauces, smoothies, and baby food directly in pots, bowls, or the blending beaker.

1. Attach the immersion blender shaft to the motor body.
2. Place the blender head into the ingredients. Ensure the blade guard is fully submerged to prevent splashing.
3. Press and hold the power button (or Turbo button for maximum power) to begin blending. Move the blender up and down gently to ensure even blending.
4. Release the button to stop. Unplug before removing from ingredients.

Image: An illustration demonstrating the variable 6-speed and turbo mode capabilities of the BioloMix hand blender for different food preparations like egg whisking, sauces, milkshakes, baby food, chopping, and peanut butter.

Image: A close-up view of the durable stainless steel blade and guard of the immersion blender, designed for efficient blending of various ingredients.

Using the Chopper Attachment

Use the chopping bowl for mincing meat, chopping vegetables, nuts, and herbs.

1. Place the chopping blade onto the center pin of the chopping bowl.
2. Add ingredients to the chopping bowl. Do not exceed the MAX fill line.
3. Place the chopper lid onto the bowl, then attach the motor body to the lid.
4. Press and hold the power button (or Turbo button) in short pulses until desired consistency is reached.
5. Unplug, then carefully remove the motor body, lid, and blade before emptying the bowl.

Image: The chopper attachment in use, demonstrating its ability to efficiently process meat into a fine mince.

Using the Whisk Attachment

Perfect for whipping cream, beating eggs, and mixing light batters.

1. Attach the whisk to the whisk gear box, then attach the gear box to the motor body.
2. Place the whisk into the ingredients in a bowl or the blending beaker.
3. Press and hold the power button to begin whisking. Use lower speeds for gentle mixing and higher speeds for whipping.
4. Release the button to stop. Unplug before removing.

Image: The whisk attachment actively mixing ingredients in a bowl, demonstrating its effectiveness for aeration and blending.

Using the Milk Frother Attachment

Create creamy froth for coffee, lattes, and cappuccinos.

1. Attach the milk frother directly to the motor body.
2. Submerge the frother head into milk (cold or warm, depending on desired froth).
3. Press and hold the power button for short bursts until desired froth consistency is achieved.
4. Release the button to stop. Unplug before removing.

Cleaning and Maintenance

Proper cleaning and maintenance will ensure the longevity of your appliance.

• Motor Body: Wipe the motor body with a damp cloth. Never immerse it in water or other liquids.
• Immersion Blender Shaft, Whisk, Milk Frother: These attachments can be rinsed under running water or washed in warm, soapy water. Be extremely careful with the sharp blades of the immersion blender.
• Chopping Bowl, Blade, Lid, Blending Beaker: These parts can be washed in warm, soapy water or placed on the top rack of a dishwasher. Handle the chopper blade with care.
• Dry all parts thoroughly before storing.
• Store the appliance and its accessories in a dry place.

Troubleshooting

Specifications

Customer Support

For any questions, concerns, or assistance with your BioloMix Immersion Hand Blender, please contact our customer support team. Refer to your product packaging or the retailer's website for specific contact details.

Please have your model number (1200W) and purchase information ready when contacting support.