Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WonVon 7-inch Motorcycle CarPlay Screen with Android Auto. This device is designed to enhance your riding experience with features such as navigation, communication, and recording capabilities. Please read this manual thoroughly before use to ensure proper functionality and safety.
Safety Information
- Always prioritize road safety. Do not operate the device in a manner that distracts you from riding.
- Ensure all connections are secure and waterproof before riding, especially in wet conditions.
- Consult a professional for electrical installation if you are unsure about wiring.
- Keep the device and its components away from extreme temperatures and direct sunlight when not in use.
Package Contents
Verify that all items are present in your package:
- 7-inch Motorcycle CarPlay Unit
- Handlebar Mount
- Dual 2K Dash Cam (Front & Rear Cameras)
- TPMS (Tire Pressure Monitoring System) Sensors
- Power Cable
- Camera Extension Cables
- Wire Remote Control
- 64GB SD Card
- Socket Wrench
- Crossed Screwdriver
- Open-end Wrench
- Motorcycle Recorder Bracket
- Magnetic Quick-Release Bracket Head
- User Manual
Image: Overview of all components included in the package.
Setup
1. Mounting the Bracket
Install the handlebar mount securely onto your motorcycle's handlebars. The bracket is designed to be rotatable for optimal viewing angles. Use the provided tools to tighten all screws firmly.
Video: Demonstrates the installation process of the rotatable handlebar bracket.
2. Wiring and Component Connection
Connect the power cable to your motorcycle's battery (ACC and GND). Connect the front and rear dash cameras using the extension cables. Install the TPMS sensors on your tires according to their specific instructions. Ensure all connections are tight and properly insulated to prevent water damage.
Image: Wiring diagram for the main unit, cameras, and power connection.
3. Powering On
Once all components are securely installed and wired, turn on your motorcycle's ignition. The CarPlay unit should power on automatically. If not, check your power connections.
Operating Instructions
1. Connecting to Android Auto
To connect your Android phone, navigate to the Android Auto section on the CarPlay unit. Enable Bluetooth on your phone and pair with the device. Follow the on-screen prompts to grant necessary permissions. Android Auto will then display on the unit, allowing access to navigation, music, and calls.
Video: Step-by-step guide on connecting an Android phone to the unit via Bluetooth for Android Auto functionality.
Image: Visual steps for Android Auto connection.
2. Connecting to Apple CarPlay
For Apple CarPlay, ensure Bluetooth is enabled on your iPhone. On the CarPlay unit, select the CarPlay option. Pair your iPhone via Bluetooth and confirm the pairing request. Once connected, the CarPlay interface will appear, providing access to Apple Maps, music, messages, and more.
Video: Demonstrates connecting an iPhone to the unit for Apple CarPlay, including settings and camera view.
Image: Visual steps for Apple CarPlay connection.
3. Remote Control Function
The included wire remote control allows for safe operation without taking your hands off the handlebars. It features buttons for phone calls, loop recording, and main interface navigation. This ensures you can manage essential functions while maintaining focus on the road.
Image: Remote control functions for safe operation.
4. Dual 2K Dash Cam & Loop Recording
The unit features dual 2K front and rear cameras for continuous loop recording. This ensures that your rides are always documented. The G-sensor automatically locks footage during collisions, preventing accidental overwriting of critical events. The included 64GB SD card provides ample storage, expandable up to 256GB.
Image: Dual 2K dash cam features and loop recording.
Image: G-Sensor and loop recording functionality.
5. TPMS (Tire Pressure Monitoring System)
Monitor your tire pressure in real-time directly on the screen. The TPMS provides quick and accurate readings, enhancing safety by alerting you to potential tire issues.
Image: TPMS display and functionality.
6. Adaptive Sensor Light & Anti-Glare Design
The unit features an adaptive light sensor that automatically adjusts screen brightness for optimal visibility in varying light conditions (day or night). The anti-glare design further improves readability, reducing eye strain during bright sunlight.
Image: Adaptive light sensor for optimal screen visibility.
Image: Anti-glare screen design.
7. Split Screen Function
Utilize the split-screen function to display navigation and music simultaneously, allowing for efficient multitasking while riding.
Image: Split screen functionality for navigation and music.
8. Compass & Barometer
The integrated compass and barometer provide precise environmental sensing and navigation assistance, helping you stay oriented and informed about atmospheric conditions during your journey.
Image: Compass and barometer display.
9. Bluetooth Audio & Calls
Connect your Bluetooth headset or helmet for clear calls, music streaming, and voice-guided navigation. Ensure your headset has a microphone for full voice control functionality.
Image: Bluetooth connection for audio and calls.
Image: Music playback interface.
Maintenance
To ensure the longevity and optimal performance of your WonVon CarPlay unit, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that may damage the surface.
- Waterproof Care: While the unit is IP67 waterproof, ensure all cable connections are properly sealed to maintain water resistance. Avoid prolonged submersion.
- Storage: When not in use for extended periods, store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure you have the latest features and bug fixes.
Video: Demonstrates the IP67 waterproof capability of the unit and its components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Loose power connection, blown fuse. | Check power cable connections to the battery. Inspect and replace any blown fuses. |
| Cannot connect to CarPlay/Android Auto. | Bluetooth not enabled, incorrect pairing, phone software issue. | Ensure Bluetooth is on and visible on your phone. Re-attempt pairing. Restart your phone and the CarPlay unit. |
| Dash cam not recording. | SD card full or corrupted, camera connection issue. | Check SD card status; format or replace if necessary. Ensure cameras are securely connected. |
| TPMS not displaying readings. | Sensors not paired, low sensor battery. | Ensure TPMS sensors are correctly installed and paired with the unit. Check sensor batteries. |
| Screen glare/poor visibility. | Brightness settings, direct sunlight. | Adjust screen brightness manually or rely on the adaptive light sensor. Reposition the unit if possible to minimize direct glare. |
Specifications
| Feature | Detail |
|---|---|
| Screen Size | 7 Inches |
| Waterproof Rating | IP67 |
| Operating Temperature | -20°C to 70°C |
| Connectivity | Bluetooth, Wireless CarPlay, Wireless Android Auto |
| Dash Cam Resolution | Dual 2K (Front & Rear) |
| Memory Storage | 64 GB (expandable up to 256 GB) |
| Mounting Type | Handlebar Mount |
| Control Method | App, Touch, Voice, Remote Control |
| Supported Navigation | GPS, Worldwide Map Types |
| Additional Features | TPMS, Auto Light Sensor, Anti-Glare Design, Compass, Barometer, Split Screen |
Warranty & Support
Your WonVon Motorcycle CarPlay Screen comes with a standard manufacturer's warranty. For specific warranty details, returns, or technical support, please refer to the contact information provided below:
- Manufacturer: WonVon
- Business Name: Shenzhenshifanghaikejiyouxiangongsi
- Email: fanghai62@126.com
- Phone: +8617704079362
- Business Address: No. 997, Minzhi Avenue, Xinniu Community, Minzhi Subdistrict, Longhua District Building 1, Room 201C Shenzhen City Guangdong 518000 CN
Please retain your proof of purchase for warranty claims.