ATG 2026 New Fog Bubble Machine Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your ATG 2026 New Fog Bubble Machine. This innovative device creates bubbles filled with smoke, enhanced with colorful lights and music, offering a unique interactive experience. Please read this manual thoroughly before operation and retain it for future reference.

What's Included

Your package should contain the following items:

• Smoke Bubble Wand
• Leakproof Water Cup
• 60ml Special Bubble Solution
• Magic Gloves
• Slings
• Atomizer (Nebulizer)
• Screwdriver
• Charger
• Rechargeable Battery (1 AAA battery included)

Image: All components included in the ATG Fog Bubble Machine package.

Safety Information

Please observe the following safety precautions:

• This product is suitable for ages 3 and up. Adult supervision is recommended for younger children.
• Do not ingest the bubble solution. If swallowed, seek medical attention immediately.
• Avoid direct contact of bubble solution with eyes. If contact occurs, rinse thoroughly with water.
• Use only the provided charger and rechargeable battery.
• Do not disassemble or modify the product.
• Keep away from open flames or heat sources.
• Ensure the battery compartment is securely closed during use.

Setup

1. Battery Installation

1. Locate the battery compartment on the handle of the bubble wand.
2. Use the provided screwdriver to open the battery compartment cover.
3. Insert the rechargeable AAA battery, ensuring correct polarity (+/-).
4. Securely close the battery compartment cover with the screwdriver.

2. Preparing Bubble Solution

1. Pour the 60ml special bubble solution into the leakproof water cup.
2. Ensure the atomizer (nebulizer) is correctly inserted into the bubble wand.

Image: The innovative bubble water bottle and cup for the machine.

Operating Instructions

1. Creating Smoke Bubbles

1. Dip the bubble wand into the bubble solution in the water cup, ensuring the bubble ring is fully submerged.
2. Remove the wand and tilt it slightly to allow excess solution to drip off.
3. Press the switch on the handle to activate the machine.
4. Gently shake the wand to generate smoke-filled bubbles. The machine will also activate colorful LED lights and sound effects.

Image: A child demonstrating the one-click automatic bubble function.

2. Interactive Play with Gloves

• Wear the provided magic gloves to interact with the smoke-filled bubbles.
• The gloves allow you to gently tap, bounce, and pass the bubbles without them immediately popping.
• When a bubble bursts, it will release a puff of smoke.

Image: Two children wearing gloves, interacting with the smoke bubbles.

3. Charging the Battery

• When the battery is low, the lights or bubble production may weaken.
• Remove the rechargeable battery from the compartment.
• Connect the battery to the included charger.
• A full charge typically takes approximately 2 hours.

Maintenance

• Cleaning the Wand: If the bubble solution becomes foamy or the wand's performance decreases, clean the bubble ring and the area around the plastic flap. Wipe away any excess foam or residue.
• Storage: After use, empty any remaining bubble solution from the cup and clean the wand. Store the machine in a cool, dry place away from direct sunlight.
• Nebulizer Replacement: Each disposable nebulizer produces approximately 300-500 smoke-filled bubbles. Once the smoke effect is depleted, the wand will continue to blow standard bubbles. Replace the nebulizer as needed for smoke effects.

Troubleshooting

Specifications

• Brand: ATG
• Model Number: 11
• ASIN: B0G3W89Y5Z
• UPC: 755745970612
• Material: Plastic
• Color: New Edition Blue (for this variant)
• Power Source: Battery Powered
• Battery Type: 1 AAA rechargeable battery (included)
• Operation Mode: Automatic
• Item Dimensions (L x W x H): 0.5" x 0.4" x 0.5"
• Manufacturer Minimum Age: 36 months

Warranty and Support

Specific warranty information is not provided in the product details. For warranty claims, technical support, or replacement parts, please contact the manufacturer, ATG, or your retailer directly. Keep your purchase receipt as proof of purchase.