1. Introduction
The Akitas V10A Cordless Vacuum Cleaner is a powerful and versatile cleaning solution designed for your home. Featuring a 450W BLDC motor, it provides strong suction for effective removal of dust, debris, and pet hair from various surfaces. Its lightweight design and long-lasting battery make cleaning efficient and convenient. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your Akitas V10A vacuum cleaner.
2. Safety Instructions
Please read all safety warnings and instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- This appliance is for household use only. Do not use outdoors or on wet surfaces.
- Do not allow children to operate the vacuum cleaner. Close supervision is necessary when used near children.
- Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without the dust cup and/or filters in place.
- Turn off the appliance before connecting or disconnecting the motorized brush, extension tube, or other accessories.
- Use only the charger supplied by the manufacturer to recharge.
- Do not handle the charger or appliance with wet hands.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Store the appliance indoors in a cool, dry place.
3. Package Contents
Verify that all components are present and in good condition upon opening the package.
Figure 3.1: The package includes the cordless handheld vacuum, power head, 2-in-1 crevice tool, two extension tubes, wall mount bracket, charger, and two HEPA filters (one pre-installed, one spare).
- Cordless Handheld Vacuum Cleaner
- Motorized Power Head
- 2-in-1 Crevice Tool
- Extension Tube (x2)
- Wall Mount Bracket
- Charger
- HEPA Filter (1 built-in, 1 spare)
4. Setup and Assembly
Follow these steps to assemble your Akitas V10A Cordless Vacuum Cleaner:
- Attach the Extension Tube: Insert one end of the extension tube into the main handheld vacuum unit until it clicks securely into place.
- Connect the Power Head: Attach the motorized power head to the other end of the extension tube, ensuring it locks firmly.
- Charge the Battery: Before first use, fully charge the vacuum cleaner. Connect the charger to the charging port on the main unit and plug it into a power outlet. The charging indicator lights will show the charging status. A full charge takes approximately 4-5 hours.
- Install Wall Mount (Optional): If desired, install the wall mount bracket in a convenient location using the provided screws. This allows for easy storage and charging.
5. Operating Instructions
5.1 Power Modes and Battery Life
Figure 5.1: Battery performance across different power modes.
The Akitas V10A features three power modes to suit various cleaning tasks:
- Eco Mode: Up to 50 minutes of runtime for light cleaning and extended use.
- Normal Mode: Up to 25 minutes of runtime for everyday cleaning tasks.
- Max Mode: Up to 10 minutes of runtime for powerful suction on stubborn dirt and deep cleaning.
To switch between modes, press the power button repeatedly. The indicator lights on the main unit will show the current power mode and remaining battery life.
5.2 Versatile Cleaning Applications
Figure 5.2: The Akitas V10A adapts to various cleaning needs, from floors to upholstery and high-reach areas.
The Akitas V10A is designed for cleaning all floor types, including carpets, hard floors, and stairs. The motorized brush head is equipped with 6 LED lights to illuminate dirt and debris, ensuring thorough cleaning even in dimly lit areas.
Figure 5.3: Flexible configurations for deep and precise cleaning.
For cleaning upholstery, car interiors, or tight spaces, detach the extension tube to use the vacuum in handheld mode. Attach the 2-in-1 crevice tool for precision cleaning in narrow gaps and corners.
6. Maintenance
6.1 Emptying the Dust Container
Figure 6.1: One-hand dust container emptying.
To maintain optimal suction, empty the dust container regularly, ideally after each use.
- Ensure the vacuum is turned off.
- Hold the main unit over a trash bin.
- Press the dust release button to open the bottom flap of the dust container, allowing debris to fall out.
- Close the flap securely after emptying.
6.2 Cleaning the HEPA Filter
The HEPA filter should be cleaned monthly or more frequently depending on usage.
- Twist and pull to remove the dust container from the main unit.
- Remove the HEPA filter from the dust container.
- Tap the filter gently to remove loose dust. For a deeper clean, rinse the filter under cold running water until the water runs clear.
- Allow the filter to air dry completely for at least 24 hours before reinserting it. Do not use a dryer or direct heat.
- Reassemble the filter and dust container, then reattach to the main unit.
6.3 Cleaning the Brush Head
Figure 6.2: The anti-tangle brush head design minimizes hair wrapping.
Although designed to be tangle-free, occasional cleaning of the brush head may be necessary.
- Turn off the vacuum cleaner and detach the power head.
- Locate the release mechanism for the brush roll (usually a latch or screw on the side).
- Remove the brush roll and carefully cut away any tangled hair or debris using scissors.
- Clean any debris from the brush housing.
- Reinsert the brush roll and secure it in place.
7. Troubleshooting
If you encounter any issues with your Akitas V10A, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | Battery is depleted or not charged. | Charge the battery fully. Ensure the charger is properly connected. |
| Low suction power | Dust container is full. Filter is clogged. Obstruction in the nozzle or tube. | Empty the dust container. Clean or replace the HEPA filter. Check for and remove any blockages. |
| Brush roll not spinning | Hair or debris tangled in the brush roll. Obstruction in the brush head. | Turn off the vacuum and remove any tangled hair or debris from the brush roll. Check for obstructions in the brush head. |
| Short battery runtime | Battery not fully charged. Using Max mode continuously. Battery degradation. | Ensure battery is fully charged. Use Eco or Normal mode for longer runtime. If battery life significantly decreases, consider battery replacement. |
8. Specifications
Below are the technical specifications for the Akitas V10A Cordless Vacuum Cleaner.
Figure 8.1: Comparative technical specifications.
| Feature | Detail |
|---|---|
| Brand | Akitas |
| Model Name | V10A |
| Motor Power | 450W BLDC Motor |
| Suction Power | Up to 45,000 Pa (45 kPa) |
| Special Features | Electric brush, Washable filter, Cordless, Front light, Pet hair cleaning |
| Filter Type | HEPA Filter |
| Surface Recommendation | All floors (carpets, hard floors, pet hair, stairs) |
| Power Source | Battery (Lithium-ion, 8 cells, 65.12 Wh) |
| Voltage | 30 Volts |
| Included Components | Wall mount, HEPA filter (spare), 2-in-1 crevice tool, 2 extension tubes |
| Product Weight | 2.15 Kilograms |
| Charging Time | 4-5 Hours |
| Battery Life (Runtime) | Up to 50 minutes (Eco mode) |
| Number of Speeds | 3 |
| Dimensions (L x W x H) | 25 cm x 9 cm x 135 cm |
| Color | Red |
Figure 8.2: The advanced 450W brushless DC motor provides consistent and strong suction power for efficient cleaning.
Figure 8.3: Suction power comparison demonstrating consistent performance.
9. Warranty and Support
For warranty information or technical support, please refer to the warranty card included in your product packaging or contact Akitas customer service through their official website or the retailer where the product was purchased. Please have your model number (V10A) and purchase date ready when contacting support.
